The Art of Acoustic Purification: Guide to Removing Audio Distractions with Adobe Audition

With the invention of advanced editing software, the demands of content creation increased. Content creators outrun many challenges to create captivating content. One of these challenges is the maintenance of audio quality. Sometimes, singing a microphone is not enough, so post-creation methods do the trick. One of the ways of doing this is through Adobe Audition noise reduction.

There are multiple things to consider during audio editing at a professional level. For instance, microphone noise, humming, wind, hiss removal, and others. Adobe Audition removes background noises and nuisances that decline audio quality. In this article, you can read about Adobe Audition remove noise methods. In addition, some other tools are discussed for users’ ease and accessibility.

AI Noise Reduction A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1: What Do You Know About Background Noise?

Background noise is anything that disturbs the pace of the video and diverts the viewer’s attention. It is the unwanted and unintended sound that takes up your audio. This may include someone chatting in the background, wind noise, and other noises. These factors decline and disrupt the clarity of audio. However, these elements can be managed through various tools and techniques to help creators.

Part 2: How to Remove Noise from Adobe Audition: A Comprehensive Review

Adobe Audition is a tool tailored to assist in audio editing tasks with precision. Users can create, merge, and mix different sound effects and be creative with them. It also has seamless support of Adobe After Effects and Adobe Stock for this purpose. Noise reduction Audition is one of its features that helps in cleaning and enhancing audio. It clears out any unnecessary background noises from any project.

In addition, the tool allows you to manage the audio levels for denoising. Along with manual settings, you can also add denoise effects to reduce background effects. You can manage high and low frequencies in Adobe Audition to remove noise. Upon editing this software, you can review the results afterward.

Different Methods of Audio Reduction in Adobe Audition

As a content creator, you must often manage dialogues and music within a video. Combining both can sometimes get the focus off actual dialogues. This can be due to many reasons; however, the solution is noise reduction in Audition. In this section, you can explore different methods to reduce noise:

• Noise Reduction Effect
• DeNoise Effect
• Dynamic Effect

1. Noise Reduction Effect

In this section, we are doing a noise reduction Audition manually. The process is straightforward, and here is a step-by-step guide to it:

Step 1: Upon importing your audio in Adobe Audition, navigate towards the top toolbar. Select the “Effects” tab and choose “Noise Reduction/Restoration” from the dropdown menu. As the menu expands further, select “Noise Reduction.”

Step 2: This will feature a Noise Reduction window on your screen. In this window, select the “Capture Noise Print” tab and adjust the Noise Reduction slider. Afterwards, press the play button on this window to listen to the audio and select “Apply.”

2. DeNoise Effect

This is the second method of Adobe Audition to remove noise. Accessing this option is almost the same, but settings may vary. Here is an instruction manual on how you can denoise in Audition:

Step 1: Once you have imported media into the timeline, reach the upper toolbar. Look for the “Effects” tab and proceed to the “Noise Reduction/Restoration” settings. From the expansion panel, choose the “DeNoise” option.

Step 2: After accessing the DeNoise window appearing on the screen, direct towards it. Then, change the position of the “Amount” slider and play your audio. Further, select the “Apply” button to add this effect to your audio.

3. Dynamic Effect

Another audio effect that you can apply and adjust in the same manner is the dynamic effect. Follow the steps given below to achieve this effect:

Step 1: After selecting the “Audio” tab, choose “Amplitude and Compression” from the dropdown menu. Expand this option and select “Dynamics” from the expansion menu.

Step 2: From the Dynamics window, expand the “Preset” option and set it to “Default.” Further, activate the “AutoGate” option and change the “Threshold” value. Then, click “Apply” to save and apply these settings.

Part 3: Other Solutions That Can Be Tried to Remove Noise from Videos

Since Adobe Audition remove noise has a professional interface, it might trouble some of you. The settings can be challenging to apply, so this section is all about alternatives. In this section, you can find the online solutions for noise reduction below:

• Flixier
• MyEdit
• KwiCut

1. Flixier

With this online Adobe Audition remove noise alternative, you can remove background noise. Users simply need to upload a video and activate the enhanced audio option. The audio enhancer eliminates unnecessary sound, giving it a name and description. It is compatible with popular and worldwide media formats like WAV, MP3, etc. Moreover, you can share the video straight to social platforms.

Key Features

• Offers an Improve Quality feature to clear up and enhance speech.
• Users can edit audio after denoising, and you can access its audio library to apply effects.
• Users can detach audio from the clip or fade in and out the audio effects to align with the video.

2. MyEdit

Are you looking for an online AI alternative to Adobe Audition noise reduction? This is a versatile platform for removing unwanted audio from up to 100 MB file size. It can denoise a 10 minutes file of formats like MP3, MP4, WAV, and FLAC. It enhances quality through audio denoise, wind remover, and speech enhancement. It uses AI technology to auto-remove background noise and enables a preview.

Key Features

• Users can employ its Vocal Remover to create clear and high-quality voiceovers.
• The user interface is a simple upload-to-convert process and doesn’t take up any storage.
• The AI helps accelerate the denoise process and retains audio quality.

3. KwiCut

Utilize this web-based Adobe Audition remove noise alternative to eliminate background noises. It can remove anything that declines an audio quality, like hums, hisses, and more. It removes any distractions in the background that decline communication. The AI assists in enhancing speech to maintain the professional element in the continent.

Key Features

• The tool supports a range of audio and video formats like MP3, MOV, WAV, and more.
• It supports text-based audio editing to edit audio or remove secondary noises.
• To create effective voiceovers for videos, use KwiCut’s voice cloning feature.

Part 4: Wondershare Filmora: A Unique Solution to Reducing Noise in Video and Audio Content

In contrast to all these Adobe Audition noise reduction alternatives, here is another. Wondershare Filmora is a wide platform for video, audio, and visual editing. The tool allows users to use manual and AI features to enhance content. In addition, Filmora introduced its V13 upgrade with new AI features. Amongst them is the AI Vocal Remover tool that separates vocals from background noise.

Using this tool can help you embed vocals in video tutorials or vlogs. In addition, Filmora also offers an Audio Denoise feature to remove distracting noises and voices. Users can enhance speech by removing wind noise, humming, and hissing. In addition, you can take Filmora’s Denoise AI’s assistance to do this.

Steps for Filmora AI Audio Denoise

If you wish to employ Filmora’s denoise feature, you are at the right place. This tool enables AI Speech Enhancement and Wind Removal with a denoise option. In addition, it has DeReverb, Hum Removal, and Hiss Removal. Users can manually adjust the value of this slider to set audio preferences. By following this step-by-step guide, users can remove background noises from video:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step 1: Initiate Filmora and Import Media to Timeline

First, download this AI software on your device and launch it. After logging in, locate and hit the “New Project” option and enter its editing interface. Afterward, click the “Ctrl + I” keys and choose files from your device. Once the files are imported, drag and place them in the timeline.

Step 2: Activate Audio Denoise

Once the media is in the timeline, select it and navigate towards the right-side panel. Under the “Audio” tab, locate and expand the “Denoise” option. In this section, enable the “Normal Denoise” button, which will auto-denoise audio. You can also use the “Denoise Level” slider to adjust the intensity of denoise.

Step 3: Export the Edited File

Once you have made all the changes, click the “Export” button at the top right corner. Further, adjust export settings in the appeared window and click the “Export” button.

Bonus Tip: Remove Vocals from Audio with Dedicated AI Vocal Remover in Filmora

Other than denoising, you can use Vocal Remover to extract speech from the background. It separates both vocals and background noise. We have crafted the step-by-step procedure to use vocal remover:

Step 1: Start Filmora and Import Video

Begin by installing and launching Wondershare Filmora on your device. Log in and select the “New Project” tab to access Filmora’s editing interface. Next, use the “Import” option to import files from your device. Once imported, simply drag and drop them onto the timeline.

Step 2: Access the AI Vocal Remover

Next, direct towards the timeline panel and right-click on the video in the timeline. From the options menu, select the “AI Vocal Remover” option. The AI will start separating vocals from background audio.

Step 3: Download the AI Processed Video

Once both vocals and background noise are separate, delete the background audio. Then, click the “Export” button to download this file on your device.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Conclusion

After reading this article, users have knowledge of noise reduction in Audition. The article discussed different methods of removing noises in this professional software. Users can employ the web-based Adobe Audition noise reduction alternatives.

If you want a next-level tool for creative editing, then download Wondershare Filmora. The article discussed two methods for enhancing audio content. The software is compatible across multiple platforms to assist all types of users.

Free Download Free Download Learn More

Part 1: What Do You Know About Background Noise?

Background noise is anything that disturbs the pace of the video and diverts the viewer’s attention. It is the unwanted and unintended sound that takes up your audio. This may include someone chatting in the background, wind noise, and other noises. These factors decline and disrupt the clarity of audio. However, these elements can be managed through various tools and techniques to help creators.

Part 2: How to Remove Noise from Adobe Audition: A Comprehensive Review

Adobe Audition is a tool tailored to assist in audio editing tasks with precision. Users can create, merge, and mix different sound effects and be creative with them. It also has seamless support of Adobe After Effects and Adobe Stock for this purpose. Noise reduction Audition is one of its features that helps in cleaning and enhancing audio. It clears out any unnecessary background noises from any project.

In addition, the tool allows you to manage the audio levels for denoising. Along with manual settings, you can also add denoise effects to reduce background effects. You can manage high and low frequencies in Adobe Audition to remove noise. Upon editing this software, you can review the results afterward.

Different Methods of Audio Reduction in Adobe Audition

As a content creator, you must often manage dialogues and music within a video. Combining both can sometimes get the focus off actual dialogues. This can be due to many reasons; however, the solution is noise reduction in Audition. In this section, you can explore different methods to reduce noise:

• Noise Reduction Effect
• DeNoise Effect
• Dynamic Effect

1. Noise Reduction Effect

In this section, we are doing a noise reduction Audition manually. The process is straightforward, and here is a step-by-step guide to it:

Step 1: Upon importing your audio in Adobe Audition, navigate towards the top toolbar. Select the “Effects” tab and choose “Noise Reduction/Restoration” from the dropdown menu. As the menu expands further, select “Noise Reduction.”

Step 2: This will feature a Noise Reduction window on your screen. In this window, select the “Capture Noise Print” tab and adjust the Noise Reduction slider. Afterwards, press the play button on this window to listen to the audio and select “Apply.”

2. DeNoise Effect

This is the second method of Adobe Audition to remove noise. Accessing this option is almost the same, but settings may vary. Here is an instruction manual on how you can denoise in Audition:

Step 1: Once you have imported media into the timeline, reach the upper toolbar. Look for the “Effects” tab and proceed to the “Noise Reduction/Restoration” settings. From the expansion panel, choose the “DeNoise” option.

Step 2: After accessing the DeNoise window appearing on the screen, direct towards it. Then, change the position of the “Amount” slider and play your audio. Further, select the “Apply” button to add this effect to your audio.

3. Dynamic Effect

Another audio effect that you can apply and adjust in the same manner is the dynamic effect. Follow the steps given below to achieve this effect:

Step 1: After selecting the “Audio” tab, choose “Amplitude and Compression” from the dropdown menu. Expand this option and select “Dynamics” from the expansion menu.

Step 2: From the Dynamics window, expand the “Preset” option and set it to “Default.” Further, activate the “AutoGate” option and change the “Threshold” value. Then, click “Apply” to save and apply these settings.

Part 3: Other Solutions That Can Be Tried to Remove Noise from Videos

Since Adobe Audition remove noise has a professional interface, it might trouble some of you. The settings can be challenging to apply, so this section is all about alternatives. In this section, you can find the online solutions for noise reduction below:

• Flixier
• MyEdit
• KwiCut

1. Flixier

With this online Adobe Audition remove noise alternative, you can remove background noise. Users simply need to upload a video and activate the enhanced audio option. The audio enhancer eliminates unnecessary sound, giving it a name and description. It is compatible with popular and worldwide media formats like WAV, MP3, etc. Moreover, you can share the video straight to social platforms.

Key Features

• Offers an Improve Quality feature to clear up and enhance speech.
• Users can edit audio after denoising, and you can access its audio library to apply effects.
• Users can detach audio from the clip or fade in and out the audio effects to align with the video.

2. MyEdit

Are you looking for an online AI alternative to Adobe Audition noise reduction? This is a versatile platform for removing unwanted audio from up to 100 MB file size. It can denoise a 10 minutes file of formats like MP3, MP4, WAV, and FLAC. It enhances quality through audio denoise, wind remover, and speech enhancement. It uses AI technology to auto-remove background noise and enables a preview.

Key Features

• Users can employ its Vocal Remover to create clear and high-quality voiceovers.
• The user interface is a simple upload-to-convert process and doesn’t take up any storage.
• The AI helps accelerate the denoise process and retains audio quality.

3. KwiCut

Utilize this web-based Adobe Audition remove noise alternative to eliminate background noises. It can remove anything that declines an audio quality, like hums, hisses, and more. It removes any distractions in the background that decline communication. The AI assists in enhancing speech to maintain the professional element in the continent.

Key Features

• The tool supports a range of audio and video formats like MP3, MOV, WAV, and more.
• It supports text-based audio editing to edit audio or remove secondary noises.
• To create effective voiceovers for videos, use KwiCut’s voice cloning feature.

Part 4: Wondershare Filmora: A Unique Solution to Reducing Noise in Video and Audio Content

In contrast to all these Adobe Audition noise reduction alternatives, here is another. Wondershare Filmora is a wide platform for video, audio, and visual editing. The tool allows users to use manual and AI features to enhance content. In addition, Filmora introduced its V13 upgrade with new AI features. Amongst them is the AI Vocal Remover tool that separates vocals from background noise.

Using this tool can help you embed vocals in video tutorials or vlogs. In addition, Filmora also offers an Audio Denoise feature to remove distracting noises and voices. Users can enhance speech by removing wind noise, humming, and hissing. In addition, you can take Filmora’s Denoise AI’s assistance to do this.

Steps for Filmora AI Audio Denoise

If you wish to employ Filmora’s denoise feature, you are at the right place. This tool enables AI Speech Enhancement and Wind Removal with a denoise option. In addition, it has DeReverb, Hum Removal, and Hiss Removal. Users can manually adjust the value of this slider to set audio preferences. By following this step-by-step guide, users can remove background noises from video:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step 1: Initiate Filmora and Import Media to Timeline

First, download this AI software on your device and launch it. After logging in, locate and hit the “New Project” option and enter its editing interface. Afterward, click the “Ctrl + I” keys and choose files from your device. Once the files are imported, drag and place them in the timeline.

Step 2: Activate Audio Denoise

Once the media is in the timeline, select it and navigate towards the right-side panel. Under the “Audio” tab, locate and expand the “Denoise” option. In this section, enable the “Normal Denoise” button, which will auto-denoise audio. You can also use the “Denoise Level” slider to adjust the intensity of denoise.

Step 3: Export the Edited File

Once you have made all the changes, click the “Export” button at the top right corner. Further, adjust export settings in the appeared window and click the “Export” button.

Bonus Tip: Remove Vocals from Audio with Dedicated AI Vocal Remover in Filmora

Other than denoising, you can use Vocal Remover to extract speech from the background. It separates both vocals and background noise. We have crafted the step-by-step procedure to use vocal remover:

Step 1: Start Filmora and Import Video

Begin by installing and launching Wondershare Filmora on your device. Log in and select the “New Project” tab to access Filmora’s editing interface. Next, use the “Import” option to import files from your device. Once imported, simply drag and drop them onto the timeline.

Step 2: Access the AI Vocal Remover

Next, direct towards the timeline panel and right-click on the video in the timeline. From the options menu, select the “AI Vocal Remover” option. The AI will start separating vocals from background audio.

Step 3: Download the AI Processed Video

Once both vocals and background noise are separate, delete the background audio. Then, click the “Export” button to download this file on your device.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Conclusion

After reading this article, users have knowledge of noise reduction in Audition. The article discussed different methods of removing noises in this professional software. Users can employ the web-based Adobe Audition noise reduction alternatives.

If you want a next-level tool for creative editing, then download Wondershare Filmora. The article discussed two methods for enhancing audio content. The software is compatible across multiple platforms to assist all types of users.

Crafting Professional Productions: Techniques of Audio Ducking and Fading with PowerDirector’utility

How to Use Audio Ducking to Fade Out Music in PowerDirector?

Benjamin Arango

Oct 26, 2023• Proven solutions

“Can you explain to us the simple method to execute audio ducking?”

I hope you’re already aware of the audio ducking feature if you’re into video editing or any music industry. The audio ducking is commonly to balance two audios. You can see the very typical application while balancing the background music with the person speaking there. So, the different voices would pop up and needs an adjustment according to the scenario. However, selecting the most straightforward process and genuine video editor is the user’s responsibility to get the task done effectively. So, here, we would like to discuss the audio ducking function of CyberLink PowerDirector along with a suitable alternative - Wondershare Filmora.

Part 1: How to Use Audio Ducking to Fade Out Music in PowerDirector?

CyberLink PowerDirector is a video editing software with impeccable features, including Motion Tracking, Magic Movie Wizard, Encoding, Action Camera Tools, and so on. The audio ducking element in PowerDirector has automated the audio adjustment in terms of keyframes.

So, let’s consider the below steps to fade out music or fade out audio in PowerDirector audio ducking!

Step 1: Import Video

Open the CyberLink PowerDirector application, and import the video into the timeline, as shown below. Then, you can also import the background music you’d like to add to the video.

Step 2: Select Audio Ducking

Choose the background music and hit the “Audio Ducking” option from the Tools tab.

Step 3: Confirm the Audio Ducking

A pop-up audio ducking window like the below interface will appear to state that PowerDirector will automatically analyze the music.

All you need, is to hit the OK button and lend the job to PowerDirector.

Doing so will automatically add the keyframes into the background music you’ve already imported.

So, this was the entire process of music ducking keyframes automation in CyberLink PowerDirector.

Part 2: An Alternative Solution to Audio Ducking on Mac

If you’re looking for easiness, you must consider the following section for a suitable alternative!

“Which audio ducking software is the best for Mac?”

The Wondershare Filmora is not only suitable for Mac users but Windows users as well. Here are some of its features on why we used to admire Filmora for easiness and professionalism. Used by vlogger, make-up artists, and professional video editors for tutorials, editing, voice/audio editing, and after effects, Wondershare Filmora is the best choice to give a try today.

• The best part about the Wondershare Filmora is the versatility of audio editing tools.
• The window of the Audio Ducking is super intuitive and self-explanatory to the users.
• Want to go advanced? You should admire its features, including Advanced Color Tuning, Scene Detection, Green Screen, Color Match, Motion Tracking, Animation Keyframing, and so on.

All in all, the Wondershare Filmora is a remarkable video editor fulfilling the needs of endless people around the globe. It’s usually the first name in mind when it comes to innovation and simplicity.

Here is a step-by-step tutorial after which you can compare the audio ducking easiness of Wondershare Filmora with CyberLink PowerDirector.

So, let’s start without further ado!

Step 1: Install Wondershare Filmora

Click on the Try It Free button above to download and install Wondershare Filmora. Once the software installation is complete, launch it.

Step 2: Import the Video

Choose “New Project” from the primary interface, and now, go to the “Import” option to add or import the media files. You can also do a drag-and-drop.

Step 3: Select the Audio Option

Double-click the video or right-click the audio to choose the “Adjust Audio” option on the timeline that will lead you to the editing window.

Step 4: Employ Audio Ducking

You are almost there whereby tick the “Lower the volume of other clips” checkbox to proceed. Using the slider, swipe it to set the degree to which you want to lower the volume of background music.

So, these simple steps are required to enable audio ducking in Wondershare Filmora. So easy! Along with it, you can also consider using the Fade Out and Pitch slider tab for versatile audio adjustment. However, you must only check for the Ducking tab, especially when you’re a beginner and don’t want to go for extreme changes.

Conclusion

Thus, with a discussion over two different ways to implement the audio ducking feature, it’s time to state our final overview. No doubt, the PowerDirector audio ducking feature offers the simplistic way, but it lacks flexibility. Due to the keyframe setting’s automation, you can’t check for a specific part in the audio and adjust the volume as per your needs. However, this could have been done pretty quickly in Wondershare Filmora’s video editor, making it the best alternative to CyberLink PowerDirector. Keeping it the top priority, begin your journey today!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

“Can you explain to us the simple method to execute audio ducking?”

I hope you’re already aware of the audio ducking feature if you’re into video editing or any music industry. The audio ducking is commonly to balance two audios. You can see the very typical application while balancing the background music with the person speaking there. So, the different voices would pop up and needs an adjustment according to the scenario. However, selecting the most straightforward process and genuine video editor is the user’s responsibility to get the task done effectively. So, here, we would like to discuss the audio ducking function of CyberLink PowerDirector along with a suitable alternative - Wondershare Filmora.

Part 1: How to Use Audio Ducking to Fade Out Music in PowerDirector?

CyberLink PowerDirector is a video editing software with impeccable features, including Motion Tracking, Magic Movie Wizard, Encoding, Action Camera Tools, and so on. The audio ducking element in PowerDirector has automated the audio adjustment in terms of keyframes.

So, let’s consider the below steps to fade out music or fade out audio in PowerDirector audio ducking!

Step 1: Import Video

Open the CyberLink PowerDirector application, and import the video into the timeline, as shown below. Then, you can also import the background music you’d like to add to the video.

Step 2: Select Audio Ducking

Choose the background music and hit the “Audio Ducking” option from the Tools tab.

Step 3: Confirm the Audio Ducking

A pop-up audio ducking window like the below interface will appear to state that PowerDirector will automatically analyze the music.

All you need, is to hit the OK button and lend the job to PowerDirector.

Doing so will automatically add the keyframes into the background music you’ve already imported.

So, this was the entire process of music ducking keyframes automation in CyberLink PowerDirector.

Part 2: An Alternative Solution to Audio Ducking on Mac

If you’re looking for easiness, you must consider the following section for a suitable alternative!

“Which audio ducking software is the best for Mac?”

The Wondershare Filmora is not only suitable for Mac users but Windows users as well. Here are some of its features on why we used to admire Filmora for easiness and professionalism. Used by vlogger, make-up artists, and professional video editors for tutorials, editing, voice/audio editing, and after effects, Wondershare Filmora is the best choice to give a try today.

• The best part about the Wondershare Filmora is the versatility of audio editing tools.
• The window of the Audio Ducking is super intuitive and self-explanatory to the users.
• Want to go advanced? You should admire its features, including Advanced Color Tuning, Scene Detection, Green Screen, Color Match, Motion Tracking, Animation Keyframing, and so on.

All in all, the Wondershare Filmora is a remarkable video editor fulfilling the needs of endless people around the globe. It’s usually the first name in mind when it comes to innovation and simplicity.

Here is a step-by-step tutorial after which you can compare the audio ducking easiness of Wondershare Filmora with CyberLink PowerDirector.

So, let’s start without further ado!

Step 1: Install Wondershare Filmora

Click on the Try It Free button above to download and install Wondershare Filmora. Once the software installation is complete, launch it.

Step 2: Import the Video

Choose “New Project” from the primary interface, and now, go to the “Import” option to add or import the media files. You can also do a drag-and-drop.

Step 3: Select the Audio Option

Double-click the video or right-click the audio to choose the “Adjust Audio” option on the timeline that will lead you to the editing window.

Step 4: Employ Audio Ducking

You are almost there whereby tick the “Lower the volume of other clips” checkbox to proceed. Using the slider, swipe it to set the degree to which you want to lower the volume of background music.

So, these simple steps are required to enable audio ducking in Wondershare Filmora. So easy! Along with it, you can also consider using the Fade Out and Pitch slider tab for versatile audio adjustment. However, you must only check for the Ducking tab, especially when you’re a beginner and don’t want to go for extreme changes.

Conclusion

Thus, with a discussion over two different ways to implement the audio ducking feature, it’s time to state our final overview. No doubt, the PowerDirector audio ducking feature offers the simplistic way, but it lacks flexibility. Due to the keyframe setting’s automation, you can’t check for a specific part in the audio and adjust the volume as per your needs. However, this could have been done pretty quickly in Wondershare Filmora’s video editor, making it the best alternative to CyberLink PowerDirector. Keeping it the top priority, begin your journey today!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

“Can you explain to us the simple method to execute audio ducking?”

I hope you’re already aware of the audio ducking feature if you’re into video editing or any music industry. The audio ducking is commonly to balance two audios. You can see the very typical application while balancing the background music with the person speaking there. So, the different voices would pop up and needs an adjustment according to the scenario. However, selecting the most straightforward process and genuine video editor is the user’s responsibility to get the task done effectively. So, here, we would like to discuss the audio ducking function of CyberLink PowerDirector along with a suitable alternative - Wondershare Filmora.

Part 1: How to Use Audio Ducking to Fade Out Music in PowerDirector?

CyberLink PowerDirector is a video editing software with impeccable features, including Motion Tracking, Magic Movie Wizard, Encoding, Action Camera Tools, and so on. The audio ducking element in PowerDirector has automated the audio adjustment in terms of keyframes.

So, let’s consider the below steps to fade out music or fade out audio in PowerDirector audio ducking!

Step 1: Import Video

Open the CyberLink PowerDirector application, and import the video into the timeline, as shown below. Then, you can also import the background music you’d like to add to the video.

Step 2: Select Audio Ducking

Choose the background music and hit the “Audio Ducking” option from the Tools tab.

Step 3: Confirm the Audio Ducking

A pop-up audio ducking window like the below interface will appear to state that PowerDirector will automatically analyze the music.

All you need, is to hit the OK button and lend the job to PowerDirector.

Doing so will automatically add the keyframes into the background music you’ve already imported.

So, this was the entire process of music ducking keyframes automation in CyberLink PowerDirector.

Part 2: An Alternative Solution to Audio Ducking on Mac

If you’re looking for easiness, you must consider the following section for a suitable alternative!

“Which audio ducking software is the best for Mac?”

The Wondershare Filmora is not only suitable for Mac users but Windows users as well. Here are some of its features on why we used to admire Filmora for easiness and professionalism. Used by vlogger, make-up artists, and professional video editors for tutorials, editing, voice/audio editing, and after effects, Wondershare Filmora is the best choice to give a try today.

• The best part about the Wondershare Filmora is the versatility of audio editing tools.
• The window of the Audio Ducking is super intuitive and self-explanatory to the users.
• Want to go advanced? You should admire its features, including Advanced Color Tuning, Scene Detection, Green Screen, Color Match, Motion Tracking, Animation Keyframing, and so on.

All in all, the Wondershare Filmora is a remarkable video editor fulfilling the needs of endless people around the globe. It’s usually the first name in mind when it comes to innovation and simplicity.

Here is a step-by-step tutorial after which you can compare the audio ducking easiness of Wondershare Filmora with CyberLink PowerDirector.

So, let’s start without further ado!

Step 1: Install Wondershare Filmora

Click on the Try It Free button above to download and install Wondershare Filmora. Once the software installation is complete, launch it.

Step 2: Import the Video

Choose “New Project” from the primary interface, and now, go to the “Import” option to add or import the media files. You can also do a drag-and-drop.

Step 3: Select the Audio Option

Double-click the video or right-click the audio to choose the “Adjust Audio” option on the timeline that will lead you to the editing window.

Step 4: Employ Audio Ducking

You are almost there whereby tick the “Lower the volume of other clips” checkbox to proceed. Using the slider, swipe it to set the degree to which you want to lower the volume of background music.

So, these simple steps are required to enable audio ducking in Wondershare Filmora. So easy! Along with it, you can also consider using the Fade Out and Pitch slider tab for versatile audio adjustment. However, you must only check for the Ducking tab, especially when you’re a beginner and don’t want to go for extreme changes.

Conclusion

Thus, with a discussion over two different ways to implement the audio ducking feature, it’s time to state our final overview. No doubt, the PowerDirector audio ducking feature offers the simplistic way, but it lacks flexibility. Due to the keyframe setting’s automation, you can’t check for a specific part in the audio and adjust the volume as per your needs. However, this could have been done pretty quickly in Wondershare Filmora’s video editor, making it the best alternative to CyberLink PowerDirector. Keeping it the top priority, begin your journey today!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

“Can you explain to us the simple method to execute audio ducking?”

I hope you’re already aware of the audio ducking feature if you’re into video editing or any music industry. The audio ducking is commonly to balance two audios. You can see the very typical application while balancing the background music with the person speaking there. So, the different voices would pop up and needs an adjustment according to the scenario. However, selecting the most straightforward process and genuine video editor is the user’s responsibility to get the task done effectively. So, here, we would like to discuss the audio ducking function of CyberLink PowerDirector along with a suitable alternative - Wondershare Filmora.

Part 1: How to Use Audio Ducking to Fade Out Music in PowerDirector?

CyberLink PowerDirector is a video editing software with impeccable features, including Motion Tracking, Magic Movie Wizard, Encoding, Action Camera Tools, and so on. The audio ducking element in PowerDirector has automated the audio adjustment in terms of keyframes.

So, let’s consider the below steps to fade out music or fade out audio in PowerDirector audio ducking!

Step 1: Import Video

Open the CyberLink PowerDirector application, and import the video into the timeline, as shown below. Then, you can also import the background music you’d like to add to the video.

Step 2: Select Audio Ducking

Choose the background music and hit the “Audio Ducking” option from the Tools tab.

Step 3: Confirm the Audio Ducking

A pop-up audio ducking window like the below interface will appear to state that PowerDirector will automatically analyze the music.

All you need, is to hit the OK button and lend the job to PowerDirector.

Doing so will automatically add the keyframes into the background music you’ve already imported.

So, this was the entire process of music ducking keyframes automation in CyberLink PowerDirector.

Part 2: An Alternative Solution to Audio Ducking on Mac

If you’re looking for easiness, you must consider the following section for a suitable alternative!

“Which audio ducking software is the best for Mac?”

The Wondershare Filmora is not only suitable for Mac users but Windows users as well. Here are some of its features on why we used to admire Filmora for easiness and professionalism. Used by vlogger, make-up artists, and professional video editors for tutorials, editing, voice/audio editing, and after effects, Wondershare Filmora is the best choice to give a try today.

• The best part about the Wondershare Filmora is the versatility of audio editing tools.
• The window of the Audio Ducking is super intuitive and self-explanatory to the users.
• Want to go advanced? You should admire its features, including Advanced Color Tuning, Scene Detection, Green Screen, Color Match, Motion Tracking, Animation Keyframing, and so on.

All in all, the Wondershare Filmora is a remarkable video editor fulfilling the needs of endless people around the globe. It’s usually the first name in mind when it comes to innovation and simplicity.

Here is a step-by-step tutorial after which you can compare the audio ducking easiness of Wondershare Filmora with CyberLink PowerDirector.

So, let’s start without further ado!

Step 1: Install Wondershare Filmora

Click on the Try It Free button above to download and install Wondershare Filmora. Once the software installation is complete, launch it.

Step 2: Import the Video

Choose “New Project” from the primary interface, and now, go to the “Import” option to add or import the media files. You can also do a drag-and-drop.

Step 3: Select the Audio Option

Double-click the video or right-click the audio to choose the “Adjust Audio” option on the timeline that will lead you to the editing window.

Step 4: Employ Audio Ducking

You are almost there whereby tick the “Lower the volume of other clips” checkbox to proceed. Using the slider, swipe it to set the degree to which you want to lower the volume of background music.

So, these simple steps are required to enable audio ducking in Wondershare Filmora. So easy! Along with it, you can also consider using the Fade Out and Pitch slider tab for versatile audio adjustment. However, you must only check for the Ducking tab, especially when you’re a beginner and don’t want to go for extreme changes.

Conclusion

Thus, with a discussion over two different ways to implement the audio ducking feature, it’s time to state our final overview. No doubt, the PowerDirector audio ducking feature offers the simplistic way, but it lacks flexibility. Due to the keyframe setting’s automation, you can’t check for a specific part in the audio and adjust the volume as per your needs. However, this could have been done pretty quickly in Wondershare Filmora’s video editor, making it the best alternative to CyberLink PowerDirector. Keeping it the top priority, begin your journey today!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Syncing Sound: A Comprehensive Approach to Matching Timelines of Audio and Video in FCPX

How to Edit the Beat and Sync Videos to Music in Final Cut Pro X

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Also read: