“Exploring Top 5 Gratis Volume Calibration Options for MP3s”

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Strategies for Crafting a Smoothly Fading Sound Output

When adding a song to fit a video, you may often end up with an abrupt start that can be rough on the ears. To solve this problem, you can use the audio fade to gradually increase the sound volume, which will smooth the boundaries of an audio track. If you want to add fade in effect to the audio track in a few clicks, Wondershare Filmora Video Editor is a good choice. Every audio clip in this program can easily be faded in without too much effort. Want to have a try? Just follow the detailed guide below to add audio fade in effect.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

How To Fade In Audio with Wondershare Filmora?

Step 1: Import your video to the program

Install and launch Video Editor and choose the “Import” button from the top menu. Then a browser window opens for you to navigate to the target video or audio file. Select the file you want and click the “Open” button. Then the file will be inserted into the library. You can also directly drag and drop the file to the program’s library.

Step 2: Add audio fade in effect to video

After that, drag and drop your video or audio file to the corresponding timelines. Double click on the target file and go to the “Audio” column. Then you’ll see several settings such as Volume, Fade In, Fade Out and Pitch in the context menu. Find the “Fade In” option and drag the slider bar to the right or left to set the fade in length manually. After that, playback your video and adjust the fade in effect until you achieve the desired sound.

Step 3: Save the new video

Hit the “Create” button to save the new file if you’re satisfied with the result. Here are several output options for you:

Save your video files into different formats, like WMV, AVI, MP3, MKV, and more;

Save to play on various devices such as iPhone, iPad, iPod, PSP, Zune, etc.;

Instantly upload your video to YouTube or Facebook for sharing with more friends;

Burn to DVD for better preservation.

Choose one option from a different tab; click “Create” again, and activate the format settings window. Wait for a few seconds, and then the edited file will automatically open in the output location.

See, it’s that easy to add audio fade in effect to your video. Now download Wondershare Filmora Video Editor and add more effects as you like!

Bonus Tips: Wondershare Filmora recently release lots of audio effect or sound effect to help you make more creative videos. Check the below video and find how does it work!

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

How To Fade In Audio with Wondershare Filmora?

Step 1: Import your video to the program

Install and launch Video Editor and choose the “Import” button from the top menu. Then a browser window opens for you to navigate to the target video or audio file. Select the file you want and click the “Open” button. Then the file will be inserted into the library. You can also directly drag and drop the file to the program’s library.

Step 2: Add audio fade in effect to video

After that, drag and drop your video or audio file to the corresponding timelines. Double click on the target file and go to the “Audio” column. Then you’ll see several settings such as Volume, Fade In, Fade Out and Pitch in the context menu. Find the “Fade In” option and drag the slider bar to the right or left to set the fade in length manually. After that, playback your video and adjust the fade in effect until you achieve the desired sound.

Step 3: Save the new video

Hit the “Create” button to save the new file if you’re satisfied with the result. Here are several output options for you:

Save your video files into different formats, like WMV, AVI, MP3, MKV, and more;

Save to play on various devices such as iPhone, iPad, iPod, PSP, Zune, etc.;

Instantly upload your video to YouTube or Facebook for sharing with more friends;

Burn to DVD for better preservation.

Choose one option from a different tab; click “Create” again, and activate the format settings window. Wait for a few seconds, and then the edited file will automatically open in the output location.

See, it’s that easy to add audio fade in effect to your video. Now download Wondershare Filmora Video Editor and add more effects as you like!

Bonus Tips: Wondershare Filmora recently release lots of audio effect or sound effect to help you make more creative videos. Check the below video and find how does it work!

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

How To Fade In Audio with Wondershare Filmora?

Step 1: Import your video to the program

Install and launch Video Editor and choose the “Import” button from the top menu. Then a browser window opens for you to navigate to the target video or audio file. Select the file you want and click the “Open” button. Then the file will be inserted into the library. You can also directly drag and drop the file to the program’s library.

Step 2: Add audio fade in effect to video

After that, drag and drop your video or audio file to the corresponding timelines. Double click on the target file and go to the “Audio” column. Then you’ll see several settings such as Volume, Fade In, Fade Out and Pitch in the context menu. Find the “Fade In” option and drag the slider bar to the right or left to set the fade in length manually. After that, playback your video and adjust the fade in effect until you achieve the desired sound.

Step 3: Save the new video

Hit the “Create” button to save the new file if you’re satisfied with the result. Here are several output options for you:

Save your video files into different formats, like WMV, AVI, MP3, MKV, and more;

Save to play on various devices such as iPhone, iPad, iPod, PSP, Zune, etc.;

Instantly upload your video to YouTube or Facebook for sharing with more friends;

Burn to DVD for better preservation.

Choose one option from a different tab; click “Create” again, and activate the format settings window. Wait for a few seconds, and then the edited file will automatically open in the output location.

See, it’s that easy to add audio fade in effect to your video. Now download Wondershare Filmora Video Editor and add more effects as you like!

Bonus Tips: Wondershare Filmora recently release lots of audio effect or sound effect to help you make more creative videos. Check the below video and find how does it work!

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

How To Fade In Audio with Wondershare Filmora?

Step 1: Import your video to the program

Install and launch Video Editor and choose the “Import” button from the top menu. Then a browser window opens for you to navigate to the target video or audio file. Select the file you want and click the “Open” button. Then the file will be inserted into the library. You can also directly drag and drop the file to the program’s library.

Step 2: Add audio fade in effect to video

After that, drag and drop your video or audio file to the corresponding timelines. Double click on the target file and go to the “Audio” column. Then you’ll see several settings such as Volume, Fade In, Fade Out and Pitch in the context menu. Find the “Fade In” option and drag the slider bar to the right or left to set the fade in length manually. After that, playback your video and adjust the fade in effect until you achieve the desired sound.

Step 3: Save the new video

Hit the “Create” button to save the new file if you’re satisfied with the result. Here are several output options for you:

Save your video files into different formats, like WMV, AVI, MP3, MKV, and more;

Save to play on various devices such as iPhone, iPad, iPod, PSP, Zune, etc.;

Instantly upload your video to YouTube or Facebook for sharing with more friends;

Burn to DVD for better preservation.

Choose one option from a different tab; click “Create” again, and activate the format settings window. Wait for a few seconds, and then the edited file will automatically open in the output location.

See, it’s that easy to add audio fade in effect to your video. Now download Wondershare Filmora Video Editor and add more effects as you like!

Bonus Tips: Wondershare Filmora recently release lots of audio effect or sound effect to help you make more creative videos. Check the below video and find how does it work!

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Unveiling the Top 8 Sonic Signatures for YouTube Creators’ Opening Moments

8 Best Intro Sound Effects for Youtubers

Benjamin Arango

Mar 27, 2024• Proven solutions

If you’re going to be producing videos on YouTube , there are many things that you need to sort out. One of the essential considerations is your intro sound effect.

How can you be sure to catch the attention of your audience from the first moment that your video starts running?

Intro sound effects are a great idea, and we’re going to look at the 8 best places to find intro sound effect free downloads.

8 Best Intro Sound Effects That You Need to Know

1. Second Runner Up Intro

This simple noise is loud, proud, and catches the attention of anyone that’s watching your content.

Whether you use it as your big intro noise or you mix it in with a bunch of other fun sounds or music, the Runner Up Intro is a great way to bring your audience in from the first second of your video.

2. Logo Intro Sound Effects Pack

If you’re seeking out logo intro sound effects, then this effects pack has everything that you need. With multiple free options for sound effects, you can use each one individually or mix them with your current intro music to make something unique to your channel.

The effects pack offers a variety of options for free, so it’s a simple way to make your intro music right.

3. FT1 180 Gmin Intro Lead

There’s nothing like an exciting intro sound that keeps increasing in volume to get your audience pumped about what there is to come.

This intro lead has been designed for anyone ready to do some fun graphic design with their logo.

Since it is reminiscent of a rubber band bouncing back and forth, it’ll be straightforward to put together a logo intro that does something similar.

4. Cinematic Intros

Any sort of intro sound effect free download would be incomplete without a package of intro sounds that came straight from Hollywood.

Freesound has put together an ultimately collection of options that make it easy for you to pick and choose which one that you want to add to your collection.

Some of them are more recognizable than others, but all of them are fun to use!

5. Ambient Synth Pad Intro

Sometimes, simple is better, and a little bit of synthesizer never hurt anyone, right? So, it’s an excellent option for any sort of intro theme that you’re putting together. This 40+ second piece offers a wide array of sounds and such so that you’re able to mix it with anything and make it sound unique and fun!

This is one of the many synth pad options that are available at the Pond5 site, too.

6. Intro – Focus

Excitement, intensity, and lots of fun - do those words describe the content that you’re putting onto your YouTube channel?

Or are you planning a video that fits those adjectives to a “T”? If so, then this intro music may be just what you’re looking for in the first place.

It builds up quickly, has some pep to it, but also gets you interested in what is going to come next. That’s everything that you could ever want from an intro sound!

7. Drum Intro Sound Effect

Drums are always classic logo intro sound effects and lots of people just like the sound and style that come with them. This particular intro effect is more than just a simple drum roll – it uses a variety of sounds from a drum kit to draw your audience in.

With about 10 seconds worth of sound, this sound effect is a pretty stable way to ensure that you can use any drum setup for your intro.

8. Breaking News Intro

When you’re watching TV, and a news story comes on, there’s always some exciting intro that comes with it. The page linked below actually has multiple options for “breaking news” introductions.

From old-school style urgent orchestral sounds to laid back sounds that help to ease you into whatever it is that may be going on, you have a lot of great (and completely free!) news sounds that you can utilize via this website.

As you can see, there are a lot of unique options for intro sound effects. If you’re a YouTuber that is looking to expand your reach and get the resources you need to catch the attention of your audience, these sites may be a good thing to keep around.

Conclusion

You always want to have free resources for sounds and music ready to go when you need them. Check these out for yourself and start using some great resources for your future videos.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

If you’re going to be producing videos on YouTube , there are many things that you need to sort out. One of the essential considerations is your intro sound effect.

How can you be sure to catch the attention of your audience from the first moment that your video starts running?

Intro sound effects are a great idea, and we’re going to look at the 8 best places to find intro sound effect free downloads.

8 Best Intro Sound Effects That You Need to Know

1. Second Runner Up Intro

This simple noise is loud, proud, and catches the attention of anyone that’s watching your content.

Whether you use it as your big intro noise or you mix it in with a bunch of other fun sounds or music, the Runner Up Intro is a great way to bring your audience in from the first second of your video.

2. Logo Intro Sound Effects Pack

If you’re seeking out logo intro sound effects, then this effects pack has everything that you need. With multiple free options for sound effects, you can use each one individually or mix them with your current intro music to make something unique to your channel.

The effects pack offers a variety of options for free, so it’s a simple way to make your intro music right.

3. FT1 180 Gmin Intro Lead

There’s nothing like an exciting intro sound that keeps increasing in volume to get your audience pumped about what there is to come.

This intro lead has been designed for anyone ready to do some fun graphic design with their logo.

Since it is reminiscent of a rubber band bouncing back and forth, it’ll be straightforward to put together a logo intro that does something similar.

4. Cinematic Intros

Any sort of intro sound effect free download would be incomplete without a package of intro sounds that came straight from Hollywood.

Freesound has put together an ultimately collection of options that make it easy for you to pick and choose which one that you want to add to your collection.

Some of them are more recognizable than others, but all of them are fun to use!

5. Ambient Synth Pad Intro

Sometimes, simple is better, and a little bit of synthesizer never hurt anyone, right? So, it’s an excellent option for any sort of intro theme that you’re putting together. This 40+ second piece offers a wide array of sounds and such so that you’re able to mix it with anything and make it sound unique and fun!

This is one of the many synth pad options that are available at the Pond5 site, too.

6. Intro – Focus

Excitement, intensity, and lots of fun - do those words describe the content that you’re putting onto your YouTube channel?

Or are you planning a video that fits those adjectives to a “T”? If so, then this intro music may be just what you’re looking for in the first place.

It builds up quickly, has some pep to it, but also gets you interested in what is going to come next. That’s everything that you could ever want from an intro sound!

7. Drum Intro Sound Effect

Drums are always classic logo intro sound effects and lots of people just like the sound and style that come with them. This particular intro effect is more than just a simple drum roll – it uses a variety of sounds from a drum kit to draw your audience in.

With about 10 seconds worth of sound, this sound effect is a pretty stable way to ensure that you can use any drum setup for your intro.

8. Breaking News Intro

When you’re watching TV, and a news story comes on, there’s always some exciting intro that comes with it. The page linked below actually has multiple options for “breaking news” introductions.

From old-school style urgent orchestral sounds to laid back sounds that help to ease you into whatever it is that may be going on, you have a lot of great (and completely free!) news sounds that you can utilize via this website.

As you can see, there are a lot of unique options for intro sound effects. If you’re a YouTuber that is looking to expand your reach and get the resources you need to catch the attention of your audience, these sites may be a good thing to keep around.

Conclusion

You always want to have free resources for sounds and music ready to go when you need them. Check these out for yourself and start using some great resources for your future videos.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

If you’re going to be producing videos on YouTube , there are many things that you need to sort out. One of the essential considerations is your intro sound effect.

How can you be sure to catch the attention of your audience from the first moment that your video starts running?

Intro sound effects are a great idea, and we’re going to look at the 8 best places to find intro sound effect free downloads.

8 Best Intro Sound Effects That You Need to Know

1. Second Runner Up Intro

This simple noise is loud, proud, and catches the attention of anyone that’s watching your content.

Whether you use it as your big intro noise or you mix it in with a bunch of other fun sounds or music, the Runner Up Intro is a great way to bring your audience in from the first second of your video.

2. Logo Intro Sound Effects Pack

If you’re seeking out logo intro sound effects, then this effects pack has everything that you need. With multiple free options for sound effects, you can use each one individually or mix them with your current intro music to make something unique to your channel.

The effects pack offers a variety of options for free, so it’s a simple way to make your intro music right.

3. FT1 180 Gmin Intro Lead

There’s nothing like an exciting intro sound that keeps increasing in volume to get your audience pumped about what there is to come.

This intro lead has been designed for anyone ready to do some fun graphic design with their logo.

Since it is reminiscent of a rubber band bouncing back and forth, it’ll be straightforward to put together a logo intro that does something similar.

4. Cinematic Intros

Any sort of intro sound effect free download would be incomplete without a package of intro sounds that came straight from Hollywood.

Freesound has put together an ultimately collection of options that make it easy for you to pick and choose which one that you want to add to your collection.

Some of them are more recognizable than others, but all of them are fun to use!

5. Ambient Synth Pad Intro

Sometimes, simple is better, and a little bit of synthesizer never hurt anyone, right? So, it’s an excellent option for any sort of intro theme that you’re putting together. This 40+ second piece offers a wide array of sounds and such so that you’re able to mix it with anything and make it sound unique and fun!

This is one of the many synth pad options that are available at the Pond5 site, too.

6. Intro – Focus

Excitement, intensity, and lots of fun - do those words describe the content that you’re putting onto your YouTube channel?

Or are you planning a video that fits those adjectives to a “T”? If so, then this intro music may be just what you’re looking for in the first place.

It builds up quickly, has some pep to it, but also gets you interested in what is going to come next. That’s everything that you could ever want from an intro sound!

7. Drum Intro Sound Effect

Drums are always classic logo intro sound effects and lots of people just like the sound and style that come with them. This particular intro effect is more than just a simple drum roll – it uses a variety of sounds from a drum kit to draw your audience in.

With about 10 seconds worth of sound, this sound effect is a pretty stable way to ensure that you can use any drum setup for your intro.

8. Breaking News Intro

When you’re watching TV, and a news story comes on, there’s always some exciting intro that comes with it. The page linked below actually has multiple options for “breaking news” introductions.

From old-school style urgent orchestral sounds to laid back sounds that help to ease you into whatever it is that may be going on, you have a lot of great (and completely free!) news sounds that you can utilize via this website.

As you can see, there are a lot of unique options for intro sound effects. If you’re a YouTuber that is looking to expand your reach and get the resources you need to catch the attention of your audience, these sites may be a good thing to keep around.

Conclusion

You always want to have free resources for sounds and music ready to go when you need them. Check these out for yourself and start using some great resources for your future videos.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

If you’re going to be producing videos on YouTube , there are many things that you need to sort out. One of the essential considerations is your intro sound effect.

How can you be sure to catch the attention of your audience from the first moment that your video starts running?

Intro sound effects are a great idea, and we’re going to look at the 8 best places to find intro sound effect free downloads.

8 Best Intro Sound Effects That You Need to Know

1. Second Runner Up Intro

This simple noise is loud, proud, and catches the attention of anyone that’s watching your content.

Whether you use it as your big intro noise or you mix it in with a bunch of other fun sounds or music, the Runner Up Intro is a great way to bring your audience in from the first second of your video.

2. Logo Intro Sound Effects Pack

If you’re seeking out logo intro sound effects, then this effects pack has everything that you need. With multiple free options for sound effects, you can use each one individually or mix them with your current intro music to make something unique to your channel.

The effects pack offers a variety of options for free, so it’s a simple way to make your intro music right.

3. FT1 180 Gmin Intro Lead

There’s nothing like an exciting intro sound that keeps increasing in volume to get your audience pumped about what there is to come.

This intro lead has been designed for anyone ready to do some fun graphic design with their logo.

Since it is reminiscent of a rubber band bouncing back and forth, it’ll be straightforward to put together a logo intro that does something similar.

4. Cinematic Intros

Any sort of intro sound effect free download would be incomplete without a package of intro sounds that came straight from Hollywood.

Freesound has put together an ultimately collection of options that make it easy for you to pick and choose which one that you want to add to your collection.

Some of them are more recognizable than others, but all of them are fun to use!

5. Ambient Synth Pad Intro

Sometimes, simple is better, and a little bit of synthesizer never hurt anyone, right? So, it’s an excellent option for any sort of intro theme that you’re putting together. This 40+ second piece offers a wide array of sounds and such so that you’re able to mix it with anything and make it sound unique and fun!

This is one of the many synth pad options that are available at the Pond5 site, too.

6. Intro – Focus

Excitement, intensity, and lots of fun - do those words describe the content that you’re putting onto your YouTube channel?

Or are you planning a video that fits those adjectives to a “T”? If so, then this intro music may be just what you’re looking for in the first place.

It builds up quickly, has some pep to it, but also gets you interested in what is going to come next. That’s everything that you could ever want from an intro sound!

7. Drum Intro Sound Effect

Drums are always classic logo intro sound effects and lots of people just like the sound and style that come with them. This particular intro effect is more than just a simple drum roll – it uses a variety of sounds from a drum kit to draw your audience in.

With about 10 seconds worth of sound, this sound effect is a pretty stable way to ensure that you can use any drum setup for your intro.

8. Breaking News Intro

When you’re watching TV, and a news story comes on, there’s always some exciting intro that comes with it. The page linked below actually has multiple options for “breaking news” introductions.

From old-school style urgent orchestral sounds to laid back sounds that help to ease you into whatever it is that may be going on, you have a lot of great (and completely free!) news sounds that you can utilize via this website.

As you can see, there are a lot of unique options for intro sound effects. If you’re a YouTuber that is looking to expand your reach and get the resources you need to catch the attention of your audience, these sites may be a good thing to keep around.

Conclusion

You always want to have free resources for sounds and music ready to go when you need them. Check these out for yourself and start using some great resources for your future videos.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Also read: