The Premier Selection of Zero-Cost Sound Balancers

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

The Triumvirate of Premium MP3 Sound Enhancement Services Online

No matter how high-end your speakers are, there are certain audio files you will come across that sound uncomfortably low. Even when you put the volume at its peak, the sound seems to be dampened for those audio files. For example, if you have an old music file, you will find it sound lower in comparison to a modern music file. That is when you will need an MP3 volume booster that can be highly useful. You can boost the volume of the audio file so that the music as well as the voice becomes prominent.

Such an MP3 audio booster is useful for podcasters, music producers, and voiceover recorders. If you want to boost audio for a few files, you can opt for an online tool. But if you are making a professional video where you need to boost the audio, we recommend a professional video editor with audio booster. Here is the list of the top 3 MP3 volume booster online that you can use on your computer as well as smartphone.

Filmora Audio Editor

Edit system and microphone audio seperately

One click to match your sound with your video

Automatically lower the volume of one track to make another track clearer

Try It Free Try It Free

1. FileConverto Boost MP3 Volume

FileConverto has the most popular mp3 volume booster online tool. This is because FileConverto has all the different tools to modify audio and video files in one place. You have to opt for Boost MP3 Volume tool to enhance the volume of your audio file. You can not only increase the volume but also decrease the volume as per your requirements. Most importantly, you can select decibel of increment or decrement. Moreover, you can select the audio channel whose volume you want to boost. Here are the key features of File Boost MP3 Volume tool.

• Allows uploading audio files of up to 150 MB.
• Option to choose decibel value as per requirement.
• Select audio channel for boosting volume.
• Increase as well as decrease volume.
• Easy user interface and quick boosting process.

How to boost audio volume with FileConverto?

Step 1: You need to visit “fileconverto.com/boost-mp3-volume” from your web browser.

Step 2: You need to click on Browse button and select the MP3 file whose volume you want to boost.

Step 3: You will have to select Increase Volume option from Select Action.

Step 4: Select the decibel value by which you want the increment.

Step 5: Select the appropriate audio channel(s) for the boost.

Step 6: Click on ‘Submit Now’ for the file to get uploaded and volume to get boosted.

Once completed, you can select the file name and download it.

2. Audio Alter Volume Changer

Audio Alter is a versatile online tool through which you can boost the volume of your audio files. The platform supports not just MP3 files but also WAV, FLAC, and OGG audio files. Therefore, it has become a preferred destination for the concerned users. You can increase or decrease volume using decibel slider. Moreover, you can listen to the modified audio file before downloading to ensure that you have the correct volume level. Here are all the key features of Audio Alter Volume Changer.

• Drag and drop files directly.
• Supports multiple file formats.
• Allows uploading audio file up to 50 MB.
• Raise or lower volume as required.
• Live preview of modifications before downloading.
• Various presets available on bass boost.

How to boost sound online with Audio Alter?

Step 1: On your web browser, you need to navigate to audioalter.com/volume

Step 2: Add your file by clicking on Browse Computer. You can even drag and drop the file on the user interface.

Step 3: Now you can use the slider and select the dB value. You can click on Play button for live preview.

Step 4: Click on Submit button to make the changes in your audio file. Once done, you can download the file.

3. Online Converter MP3 Audio Booster

This is another simple but effective online tool to boost the volume of any MP3 audio file. The best part is that you can upload an MP3 file of size 200 MB which is the largest among all online tools. You should keep in mind that the platform supports only MP3 files. You can increase as well as decrease the volume of your audio file. Besides, you can select the percentage or the decibel by which you the appreciation or depression on the audio volume. Here are the key features of Online Converter MP3 volume booster.

• Allows boost by decibel or percentage.
• Maximum upload file size of 200 MB.
• Allows increase or decreasing volume.
• Various other audio file based tools available.

How to boost audio volume with Online Converter?

Step 1: You will have visit “www.onlineconverter.com/increase-mp3-volume“ from your web browser.

Step 2: Click on Choose File button to upload MP3 file whose volume you want to boost.

Step 3: Select the Volume boost percentage or decibel as per your preference.

Step 4: Finally, click on Convert button for its volume to get boosted as per selected parameters.

Bonus: Boost Volume Of Any Audio File With A Professional Software

You can see that all these online audio booster tools have certain limitations. First of all, there is a limitation of file size. Secondly, you have to waste your internet data to upload and download files. At times, the uploading gets stuck which could be annoying. Besides, you cannot edit different aspects of audio to enhance the overall pleasantness of the audio. That is where a professional audio editor can be useful.

We recommend Wondershare Filmora where you can edit audio and video as per requirement. The software supports various types of audio files instead of just MP3 files. You can combine and sync audio and video and edit all the different aspects of audio as per requirement. Here are the steps to boost audio volume using Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Open Filmora and go to File > Import Media > Import Media Files option.

Step 3: From your hard drive select the audio file whose volume you want to boost.

Step 4: Thereafter, drag the audio file on the timeline and right-click on it to select Adjust Audio option.

Step 5: You can adjust the volume on the left side of the screen as well as tweak with other available parameters.

Step 6: Click on Export button and save the file to your hard drive.

Conclusion –

Boosting the volume of an MP3 audio file is no more an esoteric task. You do not need to download any software as there are mp3 volume booster online tools available to get the job done perfectly. Starting from boosting the background music to increasing and decreasing voice, you can modify MP3 as well as other audio files. If you are looking for a professional software to tweak various aspects of audio, we recommend Wondershare Filmora.

Try It Free Try It Free

1. FileConverto Boost MP3 Volume

FileConverto has the most popular mp3 volume booster online tool. This is because FileConverto has all the different tools to modify audio and video files in one place. You have to opt for Boost MP3 Volume tool to enhance the volume of your audio file. You can not only increase the volume but also decrease the volume as per your requirements. Most importantly, you can select decibel of increment or decrement. Moreover, you can select the audio channel whose volume you want to boost. Here are the key features of File Boost MP3 Volume tool.

• Allows uploading audio files of up to 150 MB.
• Option to choose decibel value as per requirement.
• Select audio channel for boosting volume.
• Increase as well as decrease volume.
• Easy user interface and quick boosting process.

How to boost audio volume with FileConverto?

Step 1: You need to visit “fileconverto.com/boost-mp3-volume” from your web browser.

Step 2: You need to click on Browse button and select the MP3 file whose volume you want to boost.

Step 3: You will have to select Increase Volume option from Select Action.

Step 4: Select the decibel value by which you want the increment.

Step 5: Select the appropriate audio channel(s) for the boost.

Step 6: Click on ‘Submit Now’ for the file to get uploaded and volume to get boosted.

Once completed, you can select the file name and download it.

2. Audio Alter Volume Changer

Audio Alter is a versatile online tool through which you can boost the volume of your audio files. The platform supports not just MP3 files but also WAV, FLAC, and OGG audio files. Therefore, it has become a preferred destination for the concerned users. You can increase or decrease volume using decibel slider. Moreover, you can listen to the modified audio file before downloading to ensure that you have the correct volume level. Here are all the key features of Audio Alter Volume Changer.

• Drag and drop files directly.
• Supports multiple file formats.
• Allows uploading audio file up to 50 MB.
• Raise or lower volume as required.
• Live preview of modifications before downloading.
• Various presets available on bass boost.

How to boost sound online with Audio Alter?

Step 1: On your web browser, you need to navigate to audioalter.com/volume

Step 2: Add your file by clicking on Browse Computer. You can even drag and drop the file on the user interface.

Step 3: Now you can use the slider and select the dB value. You can click on Play button for live preview.

Step 4: Click on Submit button to make the changes in your audio file. Once done, you can download the file.

3. Online Converter MP3 Audio Booster

This is another simple but effective online tool to boost the volume of any MP3 audio file. The best part is that you can upload an MP3 file of size 200 MB which is the largest among all online tools. You should keep in mind that the platform supports only MP3 files. You can increase as well as decrease the volume of your audio file. Besides, you can select the percentage or the decibel by which you the appreciation or depression on the audio volume. Here are the key features of Online Converter MP3 volume booster.

• Allows boost by decibel or percentage.
• Maximum upload file size of 200 MB.
• Allows increase or decreasing volume.
• Various other audio file based tools available.

How to boost audio volume with Online Converter?

Step 1: You will have visit “www.onlineconverter.com/increase-mp3-volume“ from your web browser.

Step 2: Click on Choose File button to upload MP3 file whose volume you want to boost.

Step 3: Select the Volume boost percentage or decibel as per your preference.

Step 4: Finally, click on Convert button for its volume to get boosted as per selected parameters.

Bonus: Boost Volume Of Any Audio File With A Professional Software

You can see that all these online audio booster tools have certain limitations. First of all, there is a limitation of file size. Secondly, you have to waste your internet data to upload and download files. At times, the uploading gets stuck which could be annoying. Besides, you cannot edit different aspects of audio to enhance the overall pleasantness of the audio. That is where a professional audio editor can be useful.

We recommend Wondershare Filmora where you can edit audio and video as per requirement. The software supports various types of audio files instead of just MP3 files. You can combine and sync audio and video and edit all the different aspects of audio as per requirement. Here are the steps to boost audio volume using Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Open Filmora and go to File > Import Media > Import Media Files option.

Step 3: From your hard drive select the audio file whose volume you want to boost.

Step 4: Thereafter, drag the audio file on the timeline and right-click on it to select Adjust Audio option.

Step 5: You can adjust the volume on the left side of the screen as well as tweak with other available parameters.

Step 6: Click on Export button and save the file to your hard drive.

Conclusion –

Boosting the volume of an MP3 audio file is no more an esoteric task. You do not need to download any software as there are mp3 volume booster online tools available to get the job done perfectly. Starting from boosting the background music to increasing and decreasing voice, you can modify MP3 as well as other audio files. If you are looking for a professional software to tweak various aspects of audio, we recommend Wondershare Filmora.

Try It Free Try It Free

1. FileConverto Boost MP3 Volume

FileConverto has the most popular mp3 volume booster online tool. This is because FileConverto has all the different tools to modify audio and video files in one place. You have to opt for Boost MP3 Volume tool to enhance the volume of your audio file. You can not only increase the volume but also decrease the volume as per your requirements. Most importantly, you can select decibel of increment or decrement. Moreover, you can select the audio channel whose volume you want to boost. Here are the key features of File Boost MP3 Volume tool.

• Allows uploading audio files of up to 150 MB.
• Option to choose decibel value as per requirement.
• Select audio channel for boosting volume.
• Increase as well as decrease volume.
• Easy user interface and quick boosting process.

How to boost audio volume with FileConverto?

Step 1: You need to visit “fileconverto.com/boost-mp3-volume” from your web browser.

Step 2: You need to click on Browse button and select the MP3 file whose volume you want to boost.

Step 3: You will have to select Increase Volume option from Select Action.

Step 4: Select the decibel value by which you want the increment.

Step 5: Select the appropriate audio channel(s) for the boost.

Step 6: Click on ‘Submit Now’ for the file to get uploaded and volume to get boosted.

Once completed, you can select the file name and download it.

2. Audio Alter Volume Changer

Audio Alter is a versatile online tool through which you can boost the volume of your audio files. The platform supports not just MP3 files but also WAV, FLAC, and OGG audio files. Therefore, it has become a preferred destination for the concerned users. You can increase or decrease volume using decibel slider. Moreover, you can listen to the modified audio file before downloading to ensure that you have the correct volume level. Here are all the key features of Audio Alter Volume Changer.

• Drag and drop files directly.
• Supports multiple file formats.
• Allows uploading audio file up to 50 MB.
• Raise or lower volume as required.
• Live preview of modifications before downloading.
• Various presets available on bass boost.

How to boost sound online with Audio Alter?

Step 1: On your web browser, you need to navigate to audioalter.com/volume

Step 2: Add your file by clicking on Browse Computer. You can even drag and drop the file on the user interface.

Step 3: Now you can use the slider and select the dB value. You can click on Play button for live preview.

Step 4: Click on Submit button to make the changes in your audio file. Once done, you can download the file.

3. Online Converter MP3 Audio Booster

This is another simple but effective online tool to boost the volume of any MP3 audio file. The best part is that you can upload an MP3 file of size 200 MB which is the largest among all online tools. You should keep in mind that the platform supports only MP3 files. You can increase as well as decrease the volume of your audio file. Besides, you can select the percentage or the decibel by which you the appreciation or depression on the audio volume. Here are the key features of Online Converter MP3 volume booster.

• Allows boost by decibel or percentage.
• Maximum upload file size of 200 MB.
• Allows increase or decreasing volume.
• Various other audio file based tools available.

How to boost audio volume with Online Converter?

Step 1: You will have visit “www.onlineconverter.com/increase-mp3-volume“ from your web browser.

Step 2: Click on Choose File button to upload MP3 file whose volume you want to boost.

Step 3: Select the Volume boost percentage or decibel as per your preference.

Step 4: Finally, click on Convert button for its volume to get boosted as per selected parameters.

Bonus: Boost Volume Of Any Audio File With A Professional Software

You can see that all these online audio booster tools have certain limitations. First of all, there is a limitation of file size. Secondly, you have to waste your internet data to upload and download files. At times, the uploading gets stuck which could be annoying. Besides, you cannot edit different aspects of audio to enhance the overall pleasantness of the audio. That is where a professional audio editor can be useful.

We recommend Wondershare Filmora where you can edit audio and video as per requirement. The software supports various types of audio files instead of just MP3 files. You can combine and sync audio and video and edit all the different aspects of audio as per requirement. Here are the steps to boost audio volume using Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Open Filmora and go to File > Import Media > Import Media Files option.

Step 3: From your hard drive select the audio file whose volume you want to boost.

Step 4: Thereafter, drag the audio file on the timeline and right-click on it to select Adjust Audio option.

Step 5: You can adjust the volume on the left side of the screen as well as tweak with other available parameters.

Step 6: Click on Export button and save the file to your hard drive.

Conclusion –

Boosting the volume of an MP3 audio file is no more an esoteric task. You do not need to download any software as there are mp3 volume booster online tools available to get the job done perfectly. Starting from boosting the background music to increasing and decreasing voice, you can modify MP3 as well as other audio files. If you are looking for a professional software to tweak various aspects of audio, we recommend Wondershare Filmora.

Try It Free Try It Free

1. FileConverto Boost MP3 Volume

FileConverto has the most popular mp3 volume booster online tool. This is because FileConverto has all the different tools to modify audio and video files in one place. You have to opt for Boost MP3 Volume tool to enhance the volume of your audio file. You can not only increase the volume but also decrease the volume as per your requirements. Most importantly, you can select decibel of increment or decrement. Moreover, you can select the audio channel whose volume you want to boost. Here are the key features of File Boost MP3 Volume tool.

• Allows uploading audio files of up to 150 MB.
• Option to choose decibel value as per requirement.
• Select audio channel for boosting volume.
• Increase as well as decrease volume.
• Easy user interface and quick boosting process.

How to boost audio volume with FileConverto?

Step 1: You need to visit “fileconverto.com/boost-mp3-volume” from your web browser.

Step 2: You need to click on Browse button and select the MP3 file whose volume you want to boost.

Step 3: You will have to select Increase Volume option from Select Action.

Step 4: Select the decibel value by which you want the increment.

Step 5: Select the appropriate audio channel(s) for the boost.

Step 6: Click on ‘Submit Now’ for the file to get uploaded and volume to get boosted.

Once completed, you can select the file name and download it.

2. Audio Alter Volume Changer

Audio Alter is a versatile online tool through which you can boost the volume of your audio files. The platform supports not just MP3 files but also WAV, FLAC, and OGG audio files. Therefore, it has become a preferred destination for the concerned users. You can increase or decrease volume using decibel slider. Moreover, you can listen to the modified audio file before downloading to ensure that you have the correct volume level. Here are all the key features of Audio Alter Volume Changer.

• Drag and drop files directly.
• Supports multiple file formats.
• Allows uploading audio file up to 50 MB.
• Raise or lower volume as required.
• Live preview of modifications before downloading.
• Various presets available on bass boost.

How to boost sound online with Audio Alter?

Step 1: On your web browser, you need to navigate to audioalter.com/volume

Step 2: Add your file by clicking on Browse Computer. You can even drag and drop the file on the user interface.

Step 3: Now you can use the slider and select the dB value. You can click on Play button for live preview.

Step 4: Click on Submit button to make the changes in your audio file. Once done, you can download the file.

3. Online Converter MP3 Audio Booster

This is another simple but effective online tool to boost the volume of any MP3 audio file. The best part is that you can upload an MP3 file of size 200 MB which is the largest among all online tools. You should keep in mind that the platform supports only MP3 files. You can increase as well as decrease the volume of your audio file. Besides, you can select the percentage or the decibel by which you the appreciation or depression on the audio volume. Here are the key features of Online Converter MP3 volume booster.

• Allows boost by decibel or percentage.
• Maximum upload file size of 200 MB.
• Allows increase or decreasing volume.
• Various other audio file based tools available.

How to boost audio volume with Online Converter?

Step 1: You will have visit “www.onlineconverter.com/increase-mp3-volume“ from your web browser.

Step 2: Click on Choose File button to upload MP3 file whose volume you want to boost.

Step 3: Select the Volume boost percentage or decibel as per your preference.

Step 4: Finally, click on Convert button for its volume to get boosted as per selected parameters.

Bonus: Boost Volume Of Any Audio File With A Professional Software

You can see that all these online audio booster tools have certain limitations. First of all, there is a limitation of file size. Secondly, you have to waste your internet data to upload and download files. At times, the uploading gets stuck which could be annoying. Besides, you cannot edit different aspects of audio to enhance the overall pleasantness of the audio. That is where a professional audio editor can be useful.

We recommend Wondershare Filmora where you can edit audio and video as per requirement. The software supports various types of audio files instead of just MP3 files. You can combine and sync audio and video and edit all the different aspects of audio as per requirement. Here are the steps to boost audio volume using Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Open Filmora and go to File > Import Media > Import Media Files option.

Step 3: From your hard drive select the audio file whose volume you want to boost.

Step 4: Thereafter, drag the audio file on the timeline and right-click on it to select Adjust Audio option.

Step 5: You can adjust the volume on the left side of the screen as well as tweak with other available parameters.

Step 6: Click on Export button and save the file to your hard drive.

Conclusion –

Boosting the volume of an MP3 audio file is no more an esoteric task. You do not need to download any software as there are mp3 volume booster online tools available to get the job done perfectly. Starting from boosting the background music to increasing and decreasing voice, you can modify MP3 as well as other audio files. If you are looking for a professional software to tweak various aspects of audio, we recommend Wondershare Filmora.

“Mac’s Vanguard in Audio Editing: The Ultimate Compilation of the Best 4 Music Apps “

A good music editor for your Mac can do everything you need: record voiceover files, cut, delete, insert audio clips, add voice effects, add sound effects, perform a spectrographic analysis, and much more. And why do you need to do those things with a music editor? Some of the most common music editor projects include:

• Find music online and edit to share to phone and other devices
• Trim audio and music files
• Create custom ringtones
• Create and share custom music and audio files
• Add music and sound effects to video files

So how do you choose a music editor for Mac that can do everything you want? In this article, we will share with you some music editors that you can use on Mac computer. Let’s move on.

Section 1. Free Music Editors for Mac

Free-to-use is great, especially when you get all the performance and features you need in a music editor. Two free music and audio editors for Mac we recommend are:

1. Audio Editor: OcenAudio

OcenAudio has a very extensive toolkit of audio editing capabilities and tools. Still, one of its best features is that it’s easy on your memory: you can edit even very large files without requiring external memory resources.

OcenAudio supports MP3, WAV, FLAC, WMA, and many other audio formats.

2. MP3 Editor: Audacity

Audacity is free and also has to go for it, a simple and intuitive interface that is easy for beginners. It also has a surprisingly extensive list of features, options, and effects, including spectrographic analysis, undo/redo function, and more.

Audacity supports many formats, including WAV, AIFF, FLAC, MP2, MP3, and OGG.

Section 2. Professional Quality Music Editors for Mac

Pay music editing programs for Mac offer a serious boost in performance and an increased number of supported formats and output options.

Two pay music and audio editors for Mac we recommend are:

3. Music Editor: Wondershare Filmora Video & Audio Editor for Mac [Free]

Wondershare Filmora Video & Audio Editor for Mac is often aimed at users who want to edit videos, but this program also offers professional quality performance for editing music and audio. Novice users will appreciate the price and the intuitive interface that allows a gentle learning curve.

Advanced users will like the extensive features and supported formats, including a music library feature. It has slightly fewer features and supported formats than Adobe Audition, but if you don’t need those extra bells and whistles, this is the music editor for Mac for you.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you are using a windows, check this tutorial instead: Windows Video Editing Software .

4. Sound Editor: Adobe Audition

Adobe Audition comes with a high price at $20/mo. However, users who demand the best will find the cost worth it for a license. It has the most extensive audio and music editing toolset, and it supports the widest range of formats.

A complete range of tutorials also supports adobe Audition to help you get the most from your investment. The fact it takes a while to work through the tutorials and get up to speed might be the only drawback.

Section 3. How to choose Music Editor for Mac users?

Choosing a music editor for Mac, including the ability to edit and output to MP3 and MP4 formats, depends entirely on your needs. If your needs are modest and limited features or functionality work for you, several free-to-use options will get the job done. If you need more robust functionality and professional quality, a pay program will offer more satisfying performance. Keep in mind the following questions when making your choice:

• How often do I need to edit music and audio?
• Do I need simple trim and edit features, or also audio effects?
• What formats are my source files, and what formats do I want to output to?
• What is my budget, and how can I balance performance and price?

With Filmora, you can edit music and audio files with ease. Besides basic cutting features, you can apply fade-in and fade-out effects, adjust the audio volume. What’s more, you can remove the background noise in the audio to get a clear sound.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

So how do you choose a music editor for Mac that can do everything you want? In this article, we will share with you some music editors that you can use on Mac computer. Let’s move on.

Section 1. Free Music Editors for Mac

Free-to-use is great, especially when you get all the performance and features you need in a music editor. Two free music and audio editors for Mac we recommend are:

1. Audio Editor: OcenAudio

OcenAudio has a very extensive toolkit of audio editing capabilities and tools. Still, one of its best features is that it’s easy on your memory: you can edit even very large files without requiring external memory resources.

OcenAudio supports MP3, WAV, FLAC, WMA, and many other audio formats.

2. MP3 Editor: Audacity

Audacity is free and also has to go for it, a simple and intuitive interface that is easy for beginners. It also has a surprisingly extensive list of features, options, and effects, including spectrographic analysis, undo/redo function, and more.

Audacity supports many formats, including WAV, AIFF, FLAC, MP2, MP3, and OGG.

Section 2. Professional Quality Music Editors for Mac

Pay music editing programs for Mac offer a serious boost in performance and an increased number of supported formats and output options.

Two pay music and audio editors for Mac we recommend are:

3. Music Editor: Wondershare Filmora Video & Audio Editor for Mac [Free]

Wondershare Filmora Video & Audio Editor for Mac is often aimed at users who want to edit videos, but this program also offers professional quality performance for editing music and audio. Novice users will appreciate the price and the intuitive interface that allows a gentle learning curve.

Advanced users will like the extensive features and supported formats, including a music library feature. It has slightly fewer features and supported formats than Adobe Audition, but if you don’t need those extra bells and whistles, this is the music editor for Mac for you.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you are using a windows, check this tutorial instead: Windows Video Editing Software .

4. Sound Editor: Adobe Audition

Adobe Audition comes with a high price at $20/mo. However, users who demand the best will find the cost worth it for a license. It has the most extensive audio and music editing toolset, and it supports the widest range of formats.

A complete range of tutorials also supports adobe Audition to help you get the most from your investment. The fact it takes a while to work through the tutorials and get up to speed might be the only drawback.

Section 3. How to choose Music Editor for Mac users?

Choosing a music editor for Mac, including the ability to edit and output to MP3 and MP4 formats, depends entirely on your needs. If your needs are modest and limited features or functionality work for you, several free-to-use options will get the job done. If you need more robust functionality and professional quality, a pay program will offer more satisfying performance. Keep in mind the following questions when making your choice:

• How often do I need to edit music and audio?
• Do I need simple trim and edit features, or also audio effects?
• What formats are my source files, and what formats do I want to output to?
• What is my budget, and how can I balance performance and price?

With Filmora, you can edit music and audio files with ease. Besides basic cutting features, you can apply fade-in and fade-out effects, adjust the audio volume. What’s more, you can remove the background noise in the audio to get a clear sound.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

So how do you choose a music editor for Mac that can do everything you want? In this article, we will share with you some music editors that you can use on Mac computer. Let’s move on.

Section 1. Free Music Editors for Mac

Free-to-use is great, especially when you get all the performance and features you need in a music editor. Two free music and audio editors for Mac we recommend are:

1. Audio Editor: OcenAudio

OcenAudio has a very extensive toolkit of audio editing capabilities and tools. Still, one of its best features is that it’s easy on your memory: you can edit even very large files without requiring external memory resources.

OcenAudio supports MP3, WAV, FLAC, WMA, and many other audio formats.

2. MP3 Editor: Audacity

Audacity is free and also has to go for it, a simple and intuitive interface that is easy for beginners. It also has a surprisingly extensive list of features, options, and effects, including spectrographic analysis, undo/redo function, and more.

Audacity supports many formats, including WAV, AIFF, FLAC, MP2, MP3, and OGG.

Section 2. Professional Quality Music Editors for Mac

Pay music editing programs for Mac offer a serious boost in performance and an increased number of supported formats and output options.

Two pay music and audio editors for Mac we recommend are:

3. Music Editor: Wondershare Filmora Video & Audio Editor for Mac [Free]

Wondershare Filmora Video & Audio Editor for Mac is often aimed at users who want to edit videos, but this program also offers professional quality performance for editing music and audio. Novice users will appreciate the price and the intuitive interface that allows a gentle learning curve.

Advanced users will like the extensive features and supported formats, including a music library feature. It has slightly fewer features and supported formats than Adobe Audition, but if you don’t need those extra bells and whistles, this is the music editor for Mac for you.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you are using a windows, check this tutorial instead: Windows Video Editing Software .

4. Sound Editor: Adobe Audition

Adobe Audition comes with a high price at $20/mo. However, users who demand the best will find the cost worth it for a license. It has the most extensive audio and music editing toolset, and it supports the widest range of formats.

A complete range of tutorials also supports adobe Audition to help you get the most from your investment. The fact it takes a while to work through the tutorials and get up to speed might be the only drawback.

Section 3. How to choose Music Editor for Mac users?

Choosing a music editor for Mac, including the ability to edit and output to MP3 and MP4 formats, depends entirely on your needs. If your needs are modest and limited features or functionality work for you, several free-to-use options will get the job done. If you need more robust functionality and professional quality, a pay program will offer more satisfying performance. Keep in mind the following questions when making your choice:

• How often do I need to edit music and audio?
• Do I need simple trim and edit features, or also audio effects?
• What formats are my source files, and what formats do I want to output to?
• What is my budget, and how can I balance performance and price?

With Filmora, you can edit music and audio files with ease. Besides basic cutting features, you can apply fade-in and fade-out effects, adjust the audio volume. What’s more, you can remove the background noise in the audio to get a clear sound.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

So how do you choose a music editor for Mac that can do everything you want? In this article, we will share with you some music editors that you can use on Mac computer. Let’s move on.

Section 1. Free Music Editors for Mac

Free-to-use is great, especially when you get all the performance and features you need in a music editor. Two free music and audio editors for Mac we recommend are:

1. Audio Editor: OcenAudio

OcenAudio has a very extensive toolkit of audio editing capabilities and tools. Still, one of its best features is that it’s easy on your memory: you can edit even very large files without requiring external memory resources.

OcenAudio supports MP3, WAV, FLAC, WMA, and many other audio formats.

2. MP3 Editor: Audacity

Audacity is free and also has to go for it, a simple and intuitive interface that is easy for beginners. It also has a surprisingly extensive list of features, options, and effects, including spectrographic analysis, undo/redo function, and more.

Audacity supports many formats, including WAV, AIFF, FLAC, MP2, MP3, and OGG.

Section 2. Professional Quality Music Editors for Mac

Pay music editing programs for Mac offer a serious boost in performance and an increased number of supported formats and output options.

Two pay music and audio editors for Mac we recommend are:

3. Music Editor: Wondershare Filmora Video & Audio Editor for Mac [Free]

Wondershare Filmora Video & Audio Editor for Mac is often aimed at users who want to edit videos, but this program also offers professional quality performance for editing music and audio. Novice users will appreciate the price and the intuitive interface that allows a gentle learning curve.

Advanced users will like the extensive features and supported formats, including a music library feature. It has slightly fewer features and supported formats than Adobe Audition, but if you don’t need those extra bells and whistles, this is the music editor for Mac for you.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you are using a windows, check this tutorial instead: Windows Video Editing Software .

4. Sound Editor: Adobe Audition

Adobe Audition comes with a high price at $20/mo. However, users who demand the best will find the cost worth it for a license. It has the most extensive audio and music editing toolset, and it supports the widest range of formats.

A complete range of tutorials also supports adobe Audition to help you get the most from your investment. The fact it takes a while to work through the tutorials and get up to speed might be the only drawback.

Section 3. How to choose Music Editor for Mac users?

Choosing a music editor for Mac, including the ability to edit and output to MP3 and MP4 formats, depends entirely on your needs. If your needs are modest and limited features or functionality work for you, several free-to-use options will get the job done. If you need more robust functionality and professional quality, a pay program will offer more satisfying performance. Keep in mind the following questions when making your choice:

• How often do I need to edit music and audio?
• Do I need simple trim and edit features, or also audio effects?
• What formats are my source files, and what formats do I want to output to?
• What is my budget, and how can I balance performance and price?

With Filmora, you can edit music and audio files with ease. Besides basic cutting features, you can apply fade-in and fade-out effects, adjust the audio volume. What’s more, you can remove the background noise in the audio to get a clear sound.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Also read: