“Top 5 Effective Complimentary Audio Level Optimizers”

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Add Background Melody to iMovie Sequence

Versatile Video Editor - Wondershare Filmora

Try It Free Try It Free

“Can you add songs to iMovie? I need someone who can help me find a solution by providing a Detailed Guide on how to add songs in iMovie.”

It is a fact that iMovie is free for Apple users. There is a bit of a learning process that a user needs to go through before they start using it. It is also pertinant to understand that the simple process of adding a song to iMovie can be pretty tough if you do not understand the process.

Without delaying any further, let’s go through a quick detailed guide on how to add songs on iMovie as follows:

In this article

01 [How to add Music to iMovie [iPhone & Mac]](#Part 1)

02 [Can I use iTunes songs on iMovie](#Part 2)

03 [Where can I get free songs to add to iMovie](#Part 3)

Part 1 How to add Music to iMovie [iPhone & Mac]

iMovie provides Apple users with varieties of great opportunities, especially those who are much more interested in making videos to add transitions, cut clips, overlay titles, and do more on the platform. More so, for those using them already, you will notice that there are about five songs already, which can be somewhat overwhelming.

The good news is that Apple users can now add more songs on iMovie using the following steps:

For iPhone: there are different methods of adding songs to the iMovie project using your iPhone device:

Add theme music and soundtrack

● While your project is still open, click on Add Media button +and then click on Audio.

● Click on Soundtracks and all the Soundtracks that you need to download will appear showing a Download button next to them.

● Click on a soundtrack you want to download and download it. After you download a soundtrack, you can click on it to preview.

● To download all the soundtracks, click on the Download button in the upper right.

● To add a soundtrack, click on the soundtrack you want to add and then click on the Add Audio option + that appears to add a soundtrack to your project.

● Scroll down to the Theme Music section available at the Soundtracks list and add theme music to your project to add theme music.

Add background song stored on your device

● While your project is still open, click on Add Media button + and click on Audio.

● To look for songs previously synced to your device from your computer, click on My Music.

● To listen to a song before adding them, click on the song.

● To add a song to your iMovie project, click on the song and then click on the Add Audio button +.

Add imported songs from an iCloud drive or other audio

Scroll the timeline so the white vertical line known as the ‘Playhead’ appears while your project is still open and select where you want to add the audio clip or songs.

Note: The new clip gets added before or after an existing clip. This is if the ‘Playhead’ is resting over a current clip.

● Click on Add Media + and then click on Audio.

● Click on the iCloud Drive listed in the categories.

● Navigate to the folder with the audio you want to use, located at the iCloud pane,

● Click on the name of the audio clip or song you want to add and tap the Add Audio button +.

For Mac: There are different methods of adding songs to the iMovie project using your Mac device:

Add background Music

● Click on the iMovie app on your Mac device and open your movie in the timeline. Then select Audio located above the browser.

Source

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Therefore, to filter what appears as a list in the browser:

● Tap the pop-up menu at the upper-left corner and select a category.

● Look for the clip you want to add to your project in the browser.

● Drag and drop the clip to the background music well below the timeline.

You can now trim, edit, and position, the background audio independently of clips in the timeline.

Add a sound clip

● Click on the iMovie app on your Mac device and open your movie in the timeline. Select Audio in the menu located above the browser.

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Now, to filter what appears as a list in the browser:

Tap the pop-up menu located at the upper-left corner of the browser and select a category.

In the browser, select the song you want to add to your movie and then do any of the following:

a) Add all audio clips by dragging the clip from the list to the timeline.

b) Add a part of the audio clip by selecting a range in the waveform at the top of the browser. Then drag the range to the timeline.

● Finally, the audio clip will then be attached to a clip in the timeline. Therefore, the audio clip will move as well if you move the clip the audio clip is linked to.

Source

Part 2 Can I use iTunes songs on iMovie

Before we know how to add songs from iTunes iMovie, you must realize that all Music is protected. You will get an error statement that; “the songs you selected are not usable in iMovie because they are DRM (which means Digital Rights Management) protected.”

Note that to use the songs you had downloaded from iTunes, you must be sure that they have copyright permission. Otherwise, you won’t be able to use such themes in iMovie as those downloaded content through iTunes come up with limited rights only. Available options are:

● Import music from iTunes to iMovie (Already existing, downloaded files)

● Can purchase the track from iTunes Store

● Rip the CD

● Purchase music from Amazon

● Subscribe for the program named ‘Match’ under iTunes (That will assist you in getting duplicate copies of DRM free music.)

Noted: You can use all those tracks you own, but not those tracks that you get on a rental basis (such as from Apple Music).

Alternatively, you have one more option: you can add songs to iMovie from Spotify. If you are willing to learn how to add songs to iMovie from Spotify, the process is quite simple. Firstly transfer your Spotify music/songs to your music library. Then open iMovie > Add media> Add Music and select your desired song/music/track from the library.

This way, you can easily add songs from Spotify to iMovie.

Part 3 Where can I get free songs to add to iMovie

To get and add songs in iMovie, you can visit the following free platform to download the songs on your device.

● dig.ccMixter

If you are looking to find some excellent soundtrack, Music to make the iMovie add song process smooth, then using this platform will be the right approach.

● HookSounds

If you want to learn how to add a song on iMovie iPhone or Mac devices, getting Royalty-Free Resources will be the desired choice. And that choice you will get with HookSounds.

● Free sound

There is one more free music resource platform that will give you multiple options to get some incredible soundtracks for free so that you would be able to understand quickly how do you add songs to iMovie.

Conclusion

Listening to your favorite Music at your ease is the best thing in the world. Especially the freedom of Music, video editing with iMovie is a great relief to the iPhone, Mac users. But, the limited availability of Audio or songs under the iMovie library will reduce the expedition. And the question always arises how to add songs from Apple Music to iMovie or different ways to download iMovie add Songs. The article gives you a detailed description of how to add Songs to iMovie on Mac and how to add Songs to iMovie on iPhone devices with respective details. Additionally, the options given to free resources to download Music will provide you further guidance to enrich your music library with iMovie.

Try It Free Try It Free

“Can you add songs to iMovie? I need someone who can help me find a solution by providing a Detailed Guide on how to add songs in iMovie.”

It is a fact that iMovie is free for Apple users. There is a bit of a learning process that a user needs to go through before they start using it. It is also pertinant to understand that the simple process of adding a song to iMovie can be pretty tough if you do not understand the process.

Without delaying any further, let’s go through a quick detailed guide on how to add songs on iMovie as follows:

In this article

01 [How to add Music to iMovie [iPhone & Mac]](#Part 1)

02 [Can I use iTunes songs on iMovie](#Part 2)

03 [Where can I get free songs to add to iMovie](#Part 3)

Part 1 How to add Music to iMovie [iPhone & Mac]

iMovie provides Apple users with varieties of great opportunities, especially those who are much more interested in making videos to add transitions, cut clips, overlay titles, and do more on the platform. More so, for those using them already, you will notice that there are about five songs already, which can be somewhat overwhelming.

The good news is that Apple users can now add more songs on iMovie using the following steps:

For iPhone: there are different methods of adding songs to the iMovie project using your iPhone device:

Add theme music and soundtrack

● While your project is still open, click on Add Media button +and then click on Audio.

● Click on Soundtracks and all the Soundtracks that you need to download will appear showing a Download button next to them.

● Click on a soundtrack you want to download and download it. After you download a soundtrack, you can click on it to preview.

● To download all the soundtracks, click on the Download button in the upper right.

● To add a soundtrack, click on the soundtrack you want to add and then click on the Add Audio option + that appears to add a soundtrack to your project.

● Scroll down to the Theme Music section available at the Soundtracks list and add theme music to your project to add theme music.

Add background song stored on your device

● While your project is still open, click on Add Media button + and click on Audio.

● To look for songs previously synced to your device from your computer, click on My Music.

● To listen to a song before adding them, click on the song.

● To add a song to your iMovie project, click on the song and then click on the Add Audio button +.

Add imported songs from an iCloud drive or other audio

Scroll the timeline so the white vertical line known as the ‘Playhead’ appears while your project is still open and select where you want to add the audio clip or songs.

Note: The new clip gets added before or after an existing clip. This is if the ‘Playhead’ is resting over a current clip.

● Click on Add Media + and then click on Audio.

● Click on the iCloud Drive listed in the categories.

● Navigate to the folder with the audio you want to use, located at the iCloud pane,

● Click on the name of the audio clip or song you want to add and tap the Add Audio button +.

For Mac: There are different methods of adding songs to the iMovie project using your Mac device:

Add background Music

● Click on the iMovie app on your Mac device and open your movie in the timeline. Then select Audio located above the browser.

Source

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Therefore, to filter what appears as a list in the browser:

● Tap the pop-up menu at the upper-left corner and select a category.

● Look for the clip you want to add to your project in the browser.

● Drag and drop the clip to the background music well below the timeline.

You can now trim, edit, and position, the background audio independently of clips in the timeline.

Add a sound clip

● Click on the iMovie app on your Mac device and open your movie in the timeline. Select Audio in the menu located above the browser.

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Now, to filter what appears as a list in the browser:

Tap the pop-up menu located at the upper-left corner of the browser and select a category.

In the browser, select the song you want to add to your movie and then do any of the following:

a) Add all audio clips by dragging the clip from the list to the timeline.

b) Add a part of the audio clip by selecting a range in the waveform at the top of the browser. Then drag the range to the timeline.

● Finally, the audio clip will then be attached to a clip in the timeline. Therefore, the audio clip will move as well if you move the clip the audio clip is linked to.

Source

Part 2 Can I use iTunes songs on iMovie

Before we know how to add songs from iTunes iMovie, you must realize that all Music is protected. You will get an error statement that; “the songs you selected are not usable in iMovie because they are DRM (which means Digital Rights Management) protected.”

Note that to use the songs you had downloaded from iTunes, you must be sure that they have copyright permission. Otherwise, you won’t be able to use such themes in iMovie as those downloaded content through iTunes come up with limited rights only. Available options are:

● Import music from iTunes to iMovie (Already existing, downloaded files)

● Can purchase the track from iTunes Store

● Rip the CD

● Purchase music from Amazon

● Subscribe for the program named ‘Match’ under iTunes (That will assist you in getting duplicate copies of DRM free music.)

Noted: You can use all those tracks you own, but not those tracks that you get on a rental basis (such as from Apple Music).

Alternatively, you have one more option: you can add songs to iMovie from Spotify. If you are willing to learn how to add songs to iMovie from Spotify, the process is quite simple. Firstly transfer your Spotify music/songs to your music library. Then open iMovie > Add media> Add Music and select your desired song/music/track from the library.

This way, you can easily add songs from Spotify to iMovie.

Part 3 Where can I get free songs to add to iMovie

To get and add songs in iMovie, you can visit the following free platform to download the songs on your device.

● dig.ccMixter

If you are looking to find some excellent soundtrack, Music to make the iMovie add song process smooth, then using this platform will be the right approach.

● HookSounds

If you want to learn how to add a song on iMovie iPhone or Mac devices, getting Royalty-Free Resources will be the desired choice. And that choice you will get with HookSounds.

● Free sound

There is one more free music resource platform that will give you multiple options to get some incredible soundtracks for free so that you would be able to understand quickly how do you add songs to iMovie.

Conclusion

Listening to your favorite Music at your ease is the best thing in the world. Especially the freedom of Music, video editing with iMovie is a great relief to the iPhone, Mac users. But, the limited availability of Audio or songs under the iMovie library will reduce the expedition. And the question always arises how to add songs from Apple Music to iMovie or different ways to download iMovie add Songs. The article gives you a detailed description of how to add Songs to iMovie on Mac and how to add Songs to iMovie on iPhone devices with respective details. Additionally, the options given to free resources to download Music will provide you further guidance to enrich your music library with iMovie.

Try It Free Try It Free

“Can you add songs to iMovie? I need someone who can help me find a solution by providing a Detailed Guide on how to add songs in iMovie.”

It is a fact that iMovie is free for Apple users. There is a bit of a learning process that a user needs to go through before they start using it. It is also pertinant to understand that the simple process of adding a song to iMovie can be pretty tough if you do not understand the process.

Without delaying any further, let’s go through a quick detailed guide on how to add songs on iMovie as follows:

In this article

01 [How to add Music to iMovie [iPhone & Mac]](#Part 1)

02 [Can I use iTunes songs on iMovie](#Part 2)

03 [Where can I get free songs to add to iMovie](#Part 3)

Part 1 How to add Music to iMovie [iPhone & Mac]

iMovie provides Apple users with varieties of great opportunities, especially those who are much more interested in making videos to add transitions, cut clips, overlay titles, and do more on the platform. More so, for those using them already, you will notice that there are about five songs already, which can be somewhat overwhelming.

The good news is that Apple users can now add more songs on iMovie using the following steps:

For iPhone: there are different methods of adding songs to the iMovie project using your iPhone device:

Add theme music and soundtrack

● While your project is still open, click on Add Media button +and then click on Audio.

● Click on Soundtracks and all the Soundtracks that you need to download will appear showing a Download button next to them.

● Click on a soundtrack you want to download and download it. After you download a soundtrack, you can click on it to preview.

● To download all the soundtracks, click on the Download button in the upper right.

● To add a soundtrack, click on the soundtrack you want to add and then click on the Add Audio option + that appears to add a soundtrack to your project.

● Scroll down to the Theme Music section available at the Soundtracks list and add theme music to your project to add theme music.

Add background song stored on your device

● While your project is still open, click on Add Media button + and click on Audio.

● To look for songs previously synced to your device from your computer, click on My Music.

● To listen to a song before adding them, click on the song.

● To add a song to your iMovie project, click on the song and then click on the Add Audio button +.

Add imported songs from an iCloud drive or other audio

Scroll the timeline so the white vertical line known as the ‘Playhead’ appears while your project is still open and select where you want to add the audio clip or songs.

Note: The new clip gets added before or after an existing clip. This is if the ‘Playhead’ is resting over a current clip.

● Click on Add Media + and then click on Audio.

● Click on the iCloud Drive listed in the categories.

● Navigate to the folder with the audio you want to use, located at the iCloud pane,

● Click on the name of the audio clip or song you want to add and tap the Add Audio button +.

For Mac: There are different methods of adding songs to the iMovie project using your Mac device:

Add background Music

● Click on the iMovie app on your Mac device and open your movie in the timeline. Then select Audio located above the browser.

Source

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Therefore, to filter what appears as a list in the browser:

● Tap the pop-up menu at the upper-left corner and select a category.

● Look for the clip you want to add to your project in the browser.

● Drag and drop the clip to the background music well below the timeline.

You can now trim, edit, and position, the background audio independently of clips in the timeline.

Add a sound clip

● Click on the iMovie app on your Mac device and open your movie in the timeline. Select Audio in the menu located above the browser.

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Now, to filter what appears as a list in the browser:

Tap the pop-up menu located at the upper-left corner of the browser and select a category.

In the browser, select the song you want to add to your movie and then do any of the following:

a) Add all audio clips by dragging the clip from the list to the timeline.

b) Add a part of the audio clip by selecting a range in the waveform at the top of the browser. Then drag the range to the timeline.

● Finally, the audio clip will then be attached to a clip in the timeline. Therefore, the audio clip will move as well if you move the clip the audio clip is linked to.

Source

Part 2 Can I use iTunes songs on iMovie

Before we know how to add songs from iTunes iMovie, you must realize that all Music is protected. You will get an error statement that; “the songs you selected are not usable in iMovie because they are DRM (which means Digital Rights Management) protected.”

Note that to use the songs you had downloaded from iTunes, you must be sure that they have copyright permission. Otherwise, you won’t be able to use such themes in iMovie as those downloaded content through iTunes come up with limited rights only. Available options are:

● Import music from iTunes to iMovie (Already existing, downloaded files)

● Can purchase the track from iTunes Store

● Rip the CD

● Purchase music from Amazon

● Subscribe for the program named ‘Match’ under iTunes (That will assist you in getting duplicate copies of DRM free music.)

Noted: You can use all those tracks you own, but not those tracks that you get on a rental basis (such as from Apple Music).

Alternatively, you have one more option: you can add songs to iMovie from Spotify. If you are willing to learn how to add songs to iMovie from Spotify, the process is quite simple. Firstly transfer your Spotify music/songs to your music library. Then open iMovie > Add media> Add Music and select your desired song/music/track from the library.

This way, you can easily add songs from Spotify to iMovie.

Part 3 Where can I get free songs to add to iMovie

To get and add songs in iMovie, you can visit the following free platform to download the songs on your device.

● dig.ccMixter

If you are looking to find some excellent soundtrack, Music to make the iMovie add song process smooth, then using this platform will be the right approach.

● HookSounds

If you want to learn how to add a song on iMovie iPhone or Mac devices, getting Royalty-Free Resources will be the desired choice. And that choice you will get with HookSounds.

● Free sound

There is one more free music resource platform that will give you multiple options to get some incredible soundtracks for free so that you would be able to understand quickly how do you add songs to iMovie.

Conclusion

Listening to your favorite Music at your ease is the best thing in the world. Especially the freedom of Music, video editing with iMovie is a great relief to the iPhone, Mac users. But, the limited availability of Audio or songs under the iMovie library will reduce the expedition. And the question always arises how to add songs from Apple Music to iMovie or different ways to download iMovie add Songs. The article gives you a detailed description of how to add Songs to iMovie on Mac and how to add Songs to iMovie on iPhone devices with respective details. Additionally, the options given to free resources to download Music will provide you further guidance to enrich your music library with iMovie.

Try It Free Try It Free

“Can you add songs to iMovie? I need someone who can help me find a solution by providing a Detailed Guide on how to add songs in iMovie.”

It is a fact that iMovie is free for Apple users. There is a bit of a learning process that a user needs to go through before they start using it. It is also pertinant to understand that the simple process of adding a song to iMovie can be pretty tough if you do not understand the process.

Without delaying any further, let’s go through a quick detailed guide on how to add songs on iMovie as follows:

In this article

01 [How to add Music to iMovie [iPhone & Mac]](#Part 1)

02 [Can I use iTunes songs on iMovie](#Part 2)

03 [Where can I get free songs to add to iMovie](#Part 3)

Part 1 How to add Music to iMovie [iPhone & Mac]

iMovie provides Apple users with varieties of great opportunities, especially those who are much more interested in making videos to add transitions, cut clips, overlay titles, and do more on the platform. More so, for those using them already, you will notice that there are about five songs already, which can be somewhat overwhelming.

The good news is that Apple users can now add more songs on iMovie using the following steps:

For iPhone: there are different methods of adding songs to the iMovie project using your iPhone device:

Add theme music and soundtrack

● While your project is still open, click on Add Media button +and then click on Audio.

● Click on Soundtracks and all the Soundtracks that you need to download will appear showing a Download button next to them.

● Click on a soundtrack you want to download and download it. After you download a soundtrack, you can click on it to preview.

● To download all the soundtracks, click on the Download button in the upper right.

● To add a soundtrack, click on the soundtrack you want to add and then click on the Add Audio option + that appears to add a soundtrack to your project.

● Scroll down to the Theme Music section available at the Soundtracks list and add theme music to your project to add theme music.

Add background song stored on your device

● While your project is still open, click on Add Media button + and click on Audio.

● To look for songs previously synced to your device from your computer, click on My Music.

● To listen to a song before adding them, click on the song.

● To add a song to your iMovie project, click on the song and then click on the Add Audio button +.

Add imported songs from an iCloud drive or other audio

Scroll the timeline so the white vertical line known as the ‘Playhead’ appears while your project is still open and select where you want to add the audio clip or songs.

Note: The new clip gets added before or after an existing clip. This is if the ‘Playhead’ is resting over a current clip.

● Click on Add Media + and then click on Audio.

● Click on the iCloud Drive listed in the categories.

● Navigate to the folder with the audio you want to use, located at the iCloud pane,

● Click on the name of the audio clip or song you want to add and tap the Add Audio button +.

For Mac: There are different methods of adding songs to the iMovie project using your Mac device:

Add background Music

● Click on the iMovie app on your Mac device and open your movie in the timeline. Then select Audio located above the browser.

Source

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Therefore, to filter what appears as a list in the browser:

● Tap the pop-up menu at the upper-left corner and select a category.

● Look for the clip you want to add to your project in the browser.

● Drag and drop the clip to the background music well below the timeline.

You can now trim, edit, and position, the background audio independently of clips in the timeline.

Add a sound clip

● Click on the iMovie app on your Mac device and open your movie in the timeline. Select Audio in the menu located above the browser.

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Now, to filter what appears as a list in the browser:

Tap the pop-up menu located at the upper-left corner of the browser and select a category.

In the browser, select the song you want to add to your movie and then do any of the following:

a) Add all audio clips by dragging the clip from the list to the timeline.

b) Add a part of the audio clip by selecting a range in the waveform at the top of the browser. Then drag the range to the timeline.

● Finally, the audio clip will then be attached to a clip in the timeline. Therefore, the audio clip will move as well if you move the clip the audio clip is linked to.

Source

Part 2 Can I use iTunes songs on iMovie

Before we know how to add songs from iTunes iMovie, you must realize that all Music is protected. You will get an error statement that; “the songs you selected are not usable in iMovie because they are DRM (which means Digital Rights Management) protected.”

Note that to use the songs you had downloaded from iTunes, you must be sure that they have copyright permission. Otherwise, you won’t be able to use such themes in iMovie as those downloaded content through iTunes come up with limited rights only. Available options are:

● Import music from iTunes to iMovie (Already existing, downloaded files)

● Can purchase the track from iTunes Store

● Rip the CD

● Purchase music from Amazon

● Subscribe for the program named ‘Match’ under iTunes (That will assist you in getting duplicate copies of DRM free music.)

Noted: You can use all those tracks you own, but not those tracks that you get on a rental basis (such as from Apple Music).

Alternatively, you have one more option: you can add songs to iMovie from Spotify. If you are willing to learn how to add songs to iMovie from Spotify, the process is quite simple. Firstly transfer your Spotify music/songs to your music library. Then open iMovie > Add media> Add Music and select your desired song/music/track from the library.

This way, you can easily add songs from Spotify to iMovie.

Part 3 Where can I get free songs to add to iMovie

To get and add songs in iMovie, you can visit the following free platform to download the songs on your device.

● dig.ccMixter

If you are looking to find some excellent soundtrack, Music to make the iMovie add song process smooth, then using this platform will be the right approach.

● HookSounds

If you want to learn how to add a song on iMovie iPhone or Mac devices, getting Royalty-Free Resources will be the desired choice. And that choice you will get with HookSounds.

● Free sound

There is one more free music resource platform that will give you multiple options to get some incredible soundtracks for free so that you would be able to understand quickly how do you add songs to iMovie.

Conclusion

Listening to your favorite Music at your ease is the best thing in the world. Especially the freedom of Music, video editing with iMovie is a great relief to the iPhone, Mac users. But, the limited availability of Audio or songs under the iMovie library will reduce the expedition. And the question always arises how to add songs from Apple Music to iMovie or different ways to download iMovie add Songs. The article gives you a detailed description of how to add Songs to iMovie on Mac and how to add Songs to iMovie on iPhone devices with respective details. Additionally, the options given to free resources to download Music will provide you further guidance to enrich your music library with iMovie.

“Voice Personalization on iPhones: A Beginner’s Primer for Using VoiceChange Pro”

If you are bored with daily chores and your robotic routine, then allow us to share something with you. A cheap way to enjoy, laugh, and relax is using voice changers. Are you excited to learn about a brilliant voice changer? The article understudy will discuss in detail Voice Changer Plus.

If you are an iPhone or iPad user and you want to know about a good voice changer, this article is surely for you. Stay with us till the end because apart from Voice Changer Plus, we will also introduce a great video editor.

In this article

01 Introduction about Voice Changer Plus

02 Main Features of Voice Changer Plus

03 Guide about How to Use Voice Changer Plus

04 2 Other Popular Voice Changer Plus Alternatives

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1. Introduction about Voice Changer Plus

Voice Changer Plus is a highly rated and famous voice changer among all iPhone users, and it also works well on iPad. You can change and modify your voice to funny and other amazing voices with this application. Interestingly, the voice changer offers more voice effects than any of its competitors do.

With Voice Changer Plus, you can not only change your voice but also offers voice recording. Do you know what else it can do? After voice modulation, it gives you an option to edit your voice recordings. The voice changer has a clean and straight interface that even beginners can efficiently work with it without any assistance.

Part 2. Main Features of Voice Changer Plus

As we have mentioned earlier that Voice Changer Plus is a famous voice changer among iPhone and iPad users, this is because of the brilliant features you get from it. Some who has been using this voice changer for some time would know what we are talking about. If you are new to Voice Changer Plus, let’s wow you by sharing its features.

· Trim the Audio

Do you know you can trim the audio file? With Voice Changer Plus, you can trim the audio file and adjust it according to your desire. You can use a slider to trim the file, and importantly, you can trim from anywhere, as the slider can trim from the beginning as well as from the end.

· Save or Share

The application provides you with two options, either you can save the audio file to your respective iOS device. Or else, when you are done, you can also share the file with your friends on your preferred social media platform. Surprisingly, both saving and sharing feature is free.

· Voice Recording

Apart from changing voice, what else can Voice Changer Plus do? Well, the application can also record your voice. The home screen of the voice changer gives you an option to ‘Record’ your voice and later modify it. In comparison, the ‘Import’ option on the screen allows you to browse the audio file from your respective device and edit it using Voice Changer Plus.

· Premium Features

Although the application offers a lot of unique features to its users, if you are a Premium user, you get to unlock all the hidden treasures of Voice Changer Plus. Importantly, for Premium users, ads are removed, and they can also select photos to share.

Part 3. Guide about How to Use Voice Changer Plus

Voice Changer Plus has a variety of voice effects and a wide range of features that make it a good choice for iPhone users. Although the application has a clean interface but still for your help, let’s share a step-by-step guideline about how you can use Voice Changer Plus.

Step 1: Import File or Record

After installing the application from Apple Store, launch it on your device. The home screen offers you two different options. You can either ‘Record’ your voice and then add effects. Or else, you can ‘Import’ the file, which you can browse from your iPhone or iPad, or you can also get the file from the ‘File Sharing’ folder.

Step 2: Select Voice Effect

After the file has been successfully imported, you will see an image on the screen representing a human; click on it. This will show you all the different voice effect options that Voice Changer Plus offers. You can select your desired voice effect and hit the ‘Play’ button to try it.

Step 3: Use Trimmer Feature

Now, you can trim the audio file if you want to. The voice changer offers a Trimmer; you can use its sliders and trim the file where you want to add the voice effect.

Step 4: Save and Share

With Voice Changer Plus, you can save your file, just hit the ‘Save’ button and set a file name with which you want to save it. Or else, you can also ‘Share’ it to your favorite social media platform and enjoy.

Part 4. 2 Other Popular Voice Changer Plus Alternatives

Voice Changer Plus is a perfect choice for iPhone and iPad users, but there are some other voice changers as well that offer some exciting functionalities. If you want to learn about 2 popular and impressive alternatives for Voice Changer Plus, then let’s get started!

1. Voice Changer – Audio Effects

The voice changer changes your voice, and you can enjoy listening to your modified voice with Voice Changer – Audio Effects, which works across both iPhone and iPad. The application offers cool animations and has more than 25 voice effects, including zombie, alien, devil, helium, robot, chipmunk, telephone, fan, and whatnot!

Voice Changer – Audio Effects has a futuristic design that attracts users. Moreover, with its simple yet intuitive interface, the users find it easy to work with this application. The voice changer also records your voice and saves the recordings. Not just this, it also promises to deliver high-quality recordings.

2. Celebrity Voice Changer Parody

This voice changer is famous among all iPhone and iPad users and has a 4-star rating. Celebrity Voice Changer Parody is a brilliant application that changes your voice to your favorite celebrity voice within seconds. The application allows you to save your recordings and share them on your favorite platform. For using this application, you only need a good internet connection.

Bottom Line

Voice Change Plus is a stunning voice changer. After reading the above article, you must have learned a lot about its features, working, and steps. For extra information, we also shared 2 alternatives for Voice Changer Plus that are equally amazing.

Do you know a video editor that offers 4K resolution editing? Now that you know a lot about voice changers, it’s time to introduce a brilliant video editor. Wondershare Filmora Video Editor offers endless features that can make your video shine.

With Filmora video editor, you can Color Match, add Chroma Key backgrounds, Split Screen, Screen Recording, Keyframing, Motion Tracking, Video Stabilization, and a lot more features. Have you heard about Filmstock? Filmora has a media library that is loaded with cool sound effects, images, transitions, titles, and many other elements.

If you want to edit a mind-blowing video that has stunning sound effects, then don’t forget to use Wondershare Filmora Video Editor.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 Main Features of Voice Changer Plus

03 Guide about How to Use Voice Changer Plus

04 2 Other Popular Voice Changer Plus Alternatives

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1. Introduction about Voice Changer Plus

Voice Changer Plus is a highly rated and famous voice changer among all iPhone users, and it also works well on iPad. You can change and modify your voice to funny and other amazing voices with this application. Interestingly, the voice changer offers more voice effects than any of its competitors do.

With Voice Changer Plus, you can not only change your voice but also offers voice recording. Do you know what else it can do? After voice modulation, it gives you an option to edit your voice recordings. The voice changer has a clean and straight interface that even beginners can efficiently work with it without any assistance.

Part 2. Main Features of Voice Changer Plus

As we have mentioned earlier that Voice Changer Plus is a famous voice changer among iPhone and iPad users, this is because of the brilliant features you get from it. Some who has been using this voice changer for some time would know what we are talking about. If you are new to Voice Changer Plus, let’s wow you by sharing its features.

· Trim the Audio

Do you know you can trim the audio file? With Voice Changer Plus, you can trim the audio file and adjust it according to your desire. You can use a slider to trim the file, and importantly, you can trim from anywhere, as the slider can trim from the beginning as well as from the end.

· Save or Share

The application provides you with two options, either you can save the audio file to your respective iOS device. Or else, when you are done, you can also share the file with your friends on your preferred social media platform. Surprisingly, both saving and sharing feature is free.

· Voice Recording

Apart from changing voice, what else can Voice Changer Plus do? Well, the application can also record your voice. The home screen of the voice changer gives you an option to ‘Record’ your voice and later modify it. In comparison, the ‘Import’ option on the screen allows you to browse the audio file from your respective device and edit it using Voice Changer Plus.

· Premium Features

Although the application offers a lot of unique features to its users, if you are a Premium user, you get to unlock all the hidden treasures of Voice Changer Plus. Importantly, for Premium users, ads are removed, and they can also select photos to share.

Part 3. Guide about How to Use Voice Changer Plus

Voice Changer Plus has a variety of voice effects and a wide range of features that make it a good choice for iPhone users. Although the application has a clean interface but still for your help, let’s share a step-by-step guideline about how you can use Voice Changer Plus.

Step 1: Import File or Record

After installing the application from Apple Store, launch it on your device. The home screen offers you two different options. You can either ‘Record’ your voice and then add effects. Or else, you can ‘Import’ the file, which you can browse from your iPhone or iPad, or you can also get the file from the ‘File Sharing’ folder.

Step 2: Select Voice Effect

After the file has been successfully imported, you will see an image on the screen representing a human; click on it. This will show you all the different voice effect options that Voice Changer Plus offers. You can select your desired voice effect and hit the ‘Play’ button to try it.

Step 3: Use Trimmer Feature

Now, you can trim the audio file if you want to. The voice changer offers a Trimmer; you can use its sliders and trim the file where you want to add the voice effect.

Step 4: Save and Share

With Voice Changer Plus, you can save your file, just hit the ‘Save’ button and set a file name with which you want to save it. Or else, you can also ‘Share’ it to your favorite social media platform and enjoy.

Part 4. 2 Other Popular Voice Changer Plus Alternatives

Voice Changer Plus is a perfect choice for iPhone and iPad users, but there are some other voice changers as well that offer some exciting functionalities. If you want to learn about 2 popular and impressive alternatives for Voice Changer Plus, then let’s get started!

1. Voice Changer – Audio Effects

The voice changer changes your voice, and you can enjoy listening to your modified voice with Voice Changer – Audio Effects, which works across both iPhone and iPad. The application offers cool animations and has more than 25 voice effects, including zombie, alien, devil, helium, robot, chipmunk, telephone, fan, and whatnot!

Voice Changer – Audio Effects has a futuristic design that attracts users. Moreover, with its simple yet intuitive interface, the users find it easy to work with this application. The voice changer also records your voice and saves the recordings. Not just this, it also promises to deliver high-quality recordings.

2. Celebrity Voice Changer Parody

This voice changer is famous among all iPhone and iPad users and has a 4-star rating. Celebrity Voice Changer Parody is a brilliant application that changes your voice to your favorite celebrity voice within seconds. The application allows you to save your recordings and share them on your favorite platform. For using this application, you only need a good internet connection.

Bottom Line

Voice Change Plus is a stunning voice changer. After reading the above article, you must have learned a lot about its features, working, and steps. For extra information, we also shared 2 alternatives for Voice Changer Plus that are equally amazing.

Do you know a video editor that offers 4K resolution editing? Now that you know a lot about voice changers, it’s time to introduce a brilliant video editor. Wondershare Filmora Video Editor offers endless features that can make your video shine.

With Filmora video editor, you can Color Match, add Chroma Key backgrounds, Split Screen, Screen Recording, Keyframing, Motion Tracking, Video Stabilization, and a lot more features. Have you heard about Filmstock? Filmora has a media library that is loaded with cool sound effects, images, transitions, titles, and many other elements.

If you want to edit a mind-blowing video that has stunning sound effects, then don’t forget to use Wondershare Filmora Video Editor.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 Main Features of Voice Changer Plus

03 Guide about How to Use Voice Changer Plus

04 2 Other Popular Voice Changer Plus Alternatives

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1. Introduction about Voice Changer Plus

Voice Changer Plus is a highly rated and famous voice changer among all iPhone users, and it also works well on iPad. You can change and modify your voice to funny and other amazing voices with this application. Interestingly, the voice changer offers more voice effects than any of its competitors do.

With Voice Changer Plus, you can not only change your voice but also offers voice recording. Do you know what else it can do? After voice modulation, it gives you an option to edit your voice recordings. The voice changer has a clean and straight interface that even beginners can efficiently work with it without any assistance.

Part 2. Main Features of Voice Changer Plus

As we have mentioned earlier that Voice Changer Plus is a famous voice changer among iPhone and iPad users, this is because of the brilliant features you get from it. Some who has been using this voice changer for some time would know what we are talking about. If you are new to Voice Changer Plus, let’s wow you by sharing its features.

· Trim the Audio

Do you know you can trim the audio file? With Voice Changer Plus, you can trim the audio file and adjust it according to your desire. You can use a slider to trim the file, and importantly, you can trim from anywhere, as the slider can trim from the beginning as well as from the end.

· Save or Share

The application provides you with two options, either you can save the audio file to your respective iOS device. Or else, when you are done, you can also share the file with your friends on your preferred social media platform. Surprisingly, both saving and sharing feature is free.

· Voice Recording

Apart from changing voice, what else can Voice Changer Plus do? Well, the application can also record your voice. The home screen of the voice changer gives you an option to ‘Record’ your voice and later modify it. In comparison, the ‘Import’ option on the screen allows you to browse the audio file from your respective device and edit it using Voice Changer Plus.

· Premium Features

Although the application offers a lot of unique features to its users, if you are a Premium user, you get to unlock all the hidden treasures of Voice Changer Plus. Importantly, for Premium users, ads are removed, and they can also select photos to share.

Part 3. Guide about How to Use Voice Changer Plus

Voice Changer Plus has a variety of voice effects and a wide range of features that make it a good choice for iPhone users. Although the application has a clean interface but still for your help, let’s share a step-by-step guideline about how you can use Voice Changer Plus.

Step 1: Import File or Record

After installing the application from Apple Store, launch it on your device. The home screen offers you two different options. You can either ‘Record’ your voice and then add effects. Or else, you can ‘Import’ the file, which you can browse from your iPhone or iPad, or you can also get the file from the ‘File Sharing’ folder.

Step 2: Select Voice Effect

After the file has been successfully imported, you will see an image on the screen representing a human; click on it. This will show you all the different voice effect options that Voice Changer Plus offers. You can select your desired voice effect and hit the ‘Play’ button to try it.

Step 3: Use Trimmer Feature

Now, you can trim the audio file if you want to. The voice changer offers a Trimmer; you can use its sliders and trim the file where you want to add the voice effect.

Step 4: Save and Share

With Voice Changer Plus, you can save your file, just hit the ‘Save’ button and set a file name with which you want to save it. Or else, you can also ‘Share’ it to your favorite social media platform and enjoy.

Part 4. 2 Other Popular Voice Changer Plus Alternatives

Voice Changer Plus is a perfect choice for iPhone and iPad users, but there are some other voice changers as well that offer some exciting functionalities. If you want to learn about 2 popular and impressive alternatives for Voice Changer Plus, then let’s get started!

1. Voice Changer – Audio Effects

The voice changer changes your voice, and you can enjoy listening to your modified voice with Voice Changer – Audio Effects, which works across both iPhone and iPad. The application offers cool animations and has more than 25 voice effects, including zombie, alien, devil, helium, robot, chipmunk, telephone, fan, and whatnot!

Voice Changer – Audio Effects has a futuristic design that attracts users. Moreover, with its simple yet intuitive interface, the users find it easy to work with this application. The voice changer also records your voice and saves the recordings. Not just this, it also promises to deliver high-quality recordings.

2. Celebrity Voice Changer Parody

This voice changer is famous among all iPhone and iPad users and has a 4-star rating. Celebrity Voice Changer Parody is a brilliant application that changes your voice to your favorite celebrity voice within seconds. The application allows you to save your recordings and share them on your favorite platform. For using this application, you only need a good internet connection.

Bottom Line

Voice Change Plus is a stunning voice changer. After reading the above article, you must have learned a lot about its features, working, and steps. For extra information, we also shared 2 alternatives for Voice Changer Plus that are equally amazing.

Do you know a video editor that offers 4K resolution editing? Now that you know a lot about voice changers, it’s time to introduce a brilliant video editor. Wondershare Filmora Video Editor offers endless features that can make your video shine.

With Filmora video editor, you can Color Match, add Chroma Key backgrounds, Split Screen, Screen Recording, Keyframing, Motion Tracking, Video Stabilization, and a lot more features. Have you heard about Filmstock? Filmora has a media library that is loaded with cool sound effects, images, transitions, titles, and many other elements.

If you want to edit a mind-blowing video that has stunning sound effects, then don’t forget to use Wondershare Filmora Video Editor.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 Main Features of Voice Changer Plus

03 Guide about How to Use Voice Changer Plus

04 2 Other Popular Voice Changer Plus Alternatives

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1. Introduction about Voice Changer Plus

Voice Changer Plus is a highly rated and famous voice changer among all iPhone users, and it also works well on iPad. You can change and modify your voice to funny and other amazing voices with this application. Interestingly, the voice changer offers more voice effects than any of its competitors do.

With Voice Changer Plus, you can not only change your voice but also offers voice recording. Do you know what else it can do? After voice modulation, it gives you an option to edit your voice recordings. The voice changer has a clean and straight interface that even beginners can efficiently work with it without any assistance.

Part 2. Main Features of Voice Changer Plus

As we have mentioned earlier that Voice Changer Plus is a famous voice changer among iPhone and iPad users, this is because of the brilliant features you get from it. Some who has been using this voice changer for some time would know what we are talking about. If you are new to Voice Changer Plus, let’s wow you by sharing its features.

· Trim the Audio

Do you know you can trim the audio file? With Voice Changer Plus, you can trim the audio file and adjust it according to your desire. You can use a slider to trim the file, and importantly, you can trim from anywhere, as the slider can trim from the beginning as well as from the end.

· Save or Share

The application provides you with two options, either you can save the audio file to your respective iOS device. Or else, when you are done, you can also share the file with your friends on your preferred social media platform. Surprisingly, both saving and sharing feature is free.

· Voice Recording

Apart from changing voice, what else can Voice Changer Plus do? Well, the application can also record your voice. The home screen of the voice changer gives you an option to ‘Record’ your voice and later modify it. In comparison, the ‘Import’ option on the screen allows you to browse the audio file from your respective device and edit it using Voice Changer Plus.

· Premium Features

Although the application offers a lot of unique features to its users, if you are a Premium user, you get to unlock all the hidden treasures of Voice Changer Plus. Importantly, for Premium users, ads are removed, and they can also select photos to share.

Part 3. Guide about How to Use Voice Changer Plus

Voice Changer Plus has a variety of voice effects and a wide range of features that make it a good choice for iPhone users. Although the application has a clean interface but still for your help, let’s share a step-by-step guideline about how you can use Voice Changer Plus.

Step 1: Import File or Record

After installing the application from Apple Store, launch it on your device. The home screen offers you two different options. You can either ‘Record’ your voice and then add effects. Or else, you can ‘Import’ the file, which you can browse from your iPhone or iPad, or you can also get the file from the ‘File Sharing’ folder.

Step 2: Select Voice Effect

After the file has been successfully imported, you will see an image on the screen representing a human; click on it. This will show you all the different voice effect options that Voice Changer Plus offers. You can select your desired voice effect and hit the ‘Play’ button to try it.

Step 3: Use Trimmer Feature

Now, you can trim the audio file if you want to. The voice changer offers a Trimmer; you can use its sliders and trim the file where you want to add the voice effect.

Step 4: Save and Share

With Voice Changer Plus, you can save your file, just hit the ‘Save’ button and set a file name with which you want to save it. Or else, you can also ‘Share’ it to your favorite social media platform and enjoy.

Part 4. 2 Other Popular Voice Changer Plus Alternatives

Voice Changer Plus is a perfect choice for iPhone and iPad users, but there are some other voice changers as well that offer some exciting functionalities. If you want to learn about 2 popular and impressive alternatives for Voice Changer Plus, then let’s get started!

1. Voice Changer – Audio Effects

The voice changer changes your voice, and you can enjoy listening to your modified voice with Voice Changer – Audio Effects, which works across both iPhone and iPad. The application offers cool animations and has more than 25 voice effects, including zombie, alien, devil, helium, robot, chipmunk, telephone, fan, and whatnot!

Voice Changer – Audio Effects has a futuristic design that attracts users. Moreover, with its simple yet intuitive interface, the users find it easy to work with this application. The voice changer also records your voice and saves the recordings. Not just this, it also promises to deliver high-quality recordings.

2. Celebrity Voice Changer Parody

This voice changer is famous among all iPhone and iPad users and has a 4-star rating. Celebrity Voice Changer Parody is a brilliant application that changes your voice to your favorite celebrity voice within seconds. The application allows you to save your recordings and share them on your favorite platform. For using this application, you only need a good internet connection.

Bottom Line

Voice Change Plus is a stunning voice changer. After reading the above article, you must have learned a lot about its features, working, and steps. For extra information, we also shared 2 alternatives for Voice Changer Plus that are equally amazing.

Do you know a video editor that offers 4K resolution editing? Now that you know a lot about voice changers, it’s time to introduce a brilliant video editor. Wondershare Filmora Video Editor offers endless features that can make your video shine.

With Filmora video editor, you can Color Match, add Chroma Key backgrounds, Split Screen, Screen Recording, Keyframing, Motion Tracking, Video Stabilization, and a lot more features. Have you heard about Filmstock? Filmora has a media library that is loaded with cool sound effects, images, transitions, titles, and many other elements.

If you want to edit a mind-blowing video that has stunning sound effects, then don’t forget to use Wondershare Filmora Video Editor.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Also read: