The Invisible Touch: Methods to Apply Fading Effects on Sound in iMovie

How to Fade Music and Audio in iMovie on Mac?

Shanoon Cox

Mar 27, 2024• Proven solutions

Fade-in and fade-out effects can help you smooth the video, music, and audio transitions, thus you can make a better movie. When editing videos in iMovie, people may have many video clips and transitions connected to the clips. The fade in and fade out effect seems more important than ever. This tutorial will show you how to fade music and audio in iMovie.

• Part 1: How to Fade Music and Audio in iMovie on Mac
• Part 2: An Easier Way to Fade Audio and Music on Mac

---

Apart from fading in/fading out the audio, we also want to introduce the video fade-in and fade-out effects, which will help your video to get more attention. Watch the tutorial below to get detailed information about how to fade in/fade out your videos easily.

Related : How to Fade-in and Fade-out Video Clips

After adding the fade-in and fade-out effects to your video, let’s check how to fade your music and audio in iMovie first, and then we will show you how to fade in/fade out your music and audio file in an easier way.

You may also like:

• iMovie for Windows: 10 Best iMovie Alternatives for You
• How to Add Audio to Your Videos
• How to Add Video Effects in iMovie

---

Part 1: How to Fade Music and Audio in iMovie on Mac

There are two ways available to fade music and audio with iMovie. One is using the fade handles, and the other is using the audio inspector. Before using iMovie audio fade-out effects, please import your video and audio files to iMovie and start a new project.

Method 1: Use Fade Handles to Add Fade in/Fade out Effect in iMovie

Firstly, let’s take a look at the video below to check how to fade audio in/out the audio in iMovie with fade handles.

Step 1. Enable Audio Waveform

When the project opens, check “Show Waveforms” at the bottom of the Project window.

Note: The Blue waveforms indicate the sound recorded within your video clips. Green and purple waveforms indicate sounds and music you’ve added to your project.

Step 2. Move Pointer to Apply Fade Effects

Move the pointer over a waveform, and drag the small gray fade handle at the left of the clip to adjust the fade audio in effect. Then drag the small fade handle at the right of the clip to adjust the fade-out effect.

Step 3. Playback to Check

Move the playhead to the beginning part of the clips with fade effects to check the fade-in and fade-out effects. If everything works OK, uncheck “Show Waveforms” to hide the waveforms.

Related: How to Remove Background Noise from Video

Method 2: Use the Audio Inspector to Apply Fade in/Fade Out Effect in iMovie

To fade audios in and out in iMovie with the audio inspector, you can follow these steps:

Step 1. Open Your iMovie Project and Select a Clip

Double-click the video clip, choose “Clip Adjustments” to open the Inspector, and then click the “Audio” tab.

If there are two audio tracks, and you want to set the fade in and fade out in iMovie for the background music, you can double-click the background music clip to open the audio inspector. This inspector is a little different. If you don’t know how to add background music to iMovie, you can refer to this post: add background music in iMovie .

Step 2. Set the Fade In and Fade Out Effect

In the window, you can manually set the fade-in and fade-out length by dragging the slider bar to the right or left.

If you do not choose “Manual”, that means you’d like iMovie to automatically set it for you. Usually, when you drag video clips to the Project, iMovie will set the fade-in and fade-out effect randomly by increasing the audio volume at the beginning of the clip and decrease the volume at the end of the clip.

If you manually adjust the effect, you can have a better effect.

Step 3. Save the Audio Fade In and Out Effect

After the settings, you can preview the effect in the viewing window to make sure all goes well, and you are much satisfied. Then click “Done” to save the audio fade-in and fade-out effects in iMovie.

Now, that’s done! I hope the above information does help you to set the fade effects to smooth your video and audio transitions.

Related: How to Get More iMovie Themes

Part 2: An Easier Way to Fade Audio and Music on Mac

Let watch the video below to check how to apply fade-in and fade-out effects in an easier way with Wondershare Filmora for Mac. And download it now to try it by yourself.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

If you want to quickly apply fade-in or fade-out effects, iMovie’s alternative for Mac - Wondershare Filmora can help you. It enables you to easily edit videos. After you’ve made your creation, it also allows you to directly upload the complete video file to YouTube and Vimeo for sharing. Check out the quick guide below to see how to add audio fade effects in Filmora.

Step 1. Import Your Video

Import the video clip you want to add audio in and out effect. To do this, click “File” > “Import Media” to import your local file to the user’s album. Or you can drag and drop these target files from the computer to this app’s album.

Step 2. Add the Audio Fade In/Out Effect to Your Video

Place the video onto the timeline. Double-click on it and then choose “Audio”. In the tab, you can drag the slider bar to the right or left to manually set the fade in and fade out the length.

Step 3. Save Your Video

Click the “Export” button to select one of the export methods. You can choose your desired format or mobile devices, burn it to DVD and upload it to YouTube and Vimeo.

That’s all about how to fade music and audio with iMovie and its alternative. If you want to learn more about how to edit video clips with Filmora, you can visit its YouTube channel to get more detailed information. Feel free to leave comments below if you need further assistance.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Fade-in and fade-out effects can help you smooth the video, music, and audio transitions, thus you can make a better movie. When editing videos in iMovie, people may have many video clips and transitions connected to the clips. The fade in and fade out effect seems more important than ever. This tutorial will show you how to fade music and audio in iMovie.

• Part 1: How to Fade Music and Audio in iMovie on Mac
• Part 2: An Easier Way to Fade Audio and Music on Mac

---

Apart from fading in/fading out the audio, we also want to introduce the video fade-in and fade-out effects, which will help your video to get more attention. Watch the tutorial below to get detailed information about how to fade in/fade out your videos easily.

Related : How to Fade-in and Fade-out Video Clips

After adding the fade-in and fade-out effects to your video, let’s check how to fade your music and audio in iMovie first, and then we will show you how to fade in/fade out your music and audio file in an easier way.

You may also like:

• iMovie for Windows: 10 Best iMovie Alternatives for You
• How to Add Audio to Your Videos
• How to Add Video Effects in iMovie

---

Part 1: How to Fade Music and Audio in iMovie on Mac

There are two ways available to fade music and audio with iMovie. One is using the fade handles, and the other is using the audio inspector. Before using iMovie audio fade-out effects, please import your video and audio files to iMovie and start a new project.

Method 1: Use Fade Handles to Add Fade in/Fade out Effect in iMovie

Firstly, let’s take a look at the video below to check how to fade audio in/out the audio in iMovie with fade handles.

Step 1. Enable Audio Waveform

When the project opens, check “Show Waveforms” at the bottom of the Project window.

Note: The Blue waveforms indicate the sound recorded within your video clips. Green and purple waveforms indicate sounds and music you’ve added to your project.

Step 2. Move Pointer to Apply Fade Effects

Move the pointer over a waveform, and drag the small gray fade handle at the left of the clip to adjust the fade audio in effect. Then drag the small fade handle at the right of the clip to adjust the fade-out effect.

Step 3. Playback to Check

Move the playhead to the beginning part of the clips with fade effects to check the fade-in and fade-out effects. If everything works OK, uncheck “Show Waveforms” to hide the waveforms.

Related: How to Remove Background Noise from Video

Method 2: Use the Audio Inspector to Apply Fade in/Fade Out Effect in iMovie

To fade audios in and out in iMovie with the audio inspector, you can follow these steps:

Step 1. Open Your iMovie Project and Select a Clip

Double-click the video clip, choose “Clip Adjustments” to open the Inspector, and then click the “Audio” tab.

If there are two audio tracks, and you want to set the fade in and fade out in iMovie for the background music, you can double-click the background music clip to open the audio inspector. This inspector is a little different. If you don’t know how to add background music to iMovie, you can refer to this post: add background music in iMovie .

Step 2. Set the Fade In and Fade Out Effect

In the window, you can manually set the fade-in and fade-out length by dragging the slider bar to the right or left.

If you do not choose “Manual”, that means you’d like iMovie to automatically set it for you. Usually, when you drag video clips to the Project, iMovie will set the fade-in and fade-out effect randomly by increasing the audio volume at the beginning of the clip and decrease the volume at the end of the clip.

If you manually adjust the effect, you can have a better effect.

Step 3. Save the Audio Fade In and Out Effect

After the settings, you can preview the effect in the viewing window to make sure all goes well, and you are much satisfied. Then click “Done” to save the audio fade-in and fade-out effects in iMovie.

Now, that’s done! I hope the above information does help you to set the fade effects to smooth your video and audio transitions.

Related: How to Get More iMovie Themes

Part 2: An Easier Way to Fade Audio and Music on Mac

Let watch the video below to check how to apply fade-in and fade-out effects in an easier way with Wondershare Filmora for Mac. And download it now to try it by yourself.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

If you want to quickly apply fade-in or fade-out effects, iMovie’s alternative for Mac - Wondershare Filmora can help you. It enables you to easily edit videos. After you’ve made your creation, it also allows you to directly upload the complete video file to YouTube and Vimeo for sharing. Check out the quick guide below to see how to add audio fade effects in Filmora.

Step 1. Import Your Video

Import the video clip you want to add audio in and out effect. To do this, click “File” > “Import Media” to import your local file to the user’s album. Or you can drag and drop these target files from the computer to this app’s album.

Step 2. Add the Audio Fade In/Out Effect to Your Video

Place the video onto the timeline. Double-click on it and then choose “Audio”. In the tab, you can drag the slider bar to the right or left to manually set the fade in and fade out the length.

Step 3. Save Your Video

Click the “Export” button to select one of the export methods. You can choose your desired format or mobile devices, burn it to DVD and upload it to YouTube and Vimeo.

That’s all about how to fade music and audio with iMovie and its alternative. If you want to learn more about how to edit video clips with Filmora, you can visit its YouTube channel to get more detailed information. Feel free to leave comments below if you need further assistance.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Fade-in and fade-out effects can help you smooth the video, music, and audio transitions, thus you can make a better movie. When editing videos in iMovie, people may have many video clips and transitions connected to the clips. The fade in and fade out effect seems more important than ever. This tutorial will show you how to fade music and audio in iMovie.

• Part 1: How to Fade Music and Audio in iMovie on Mac
• Part 2: An Easier Way to Fade Audio and Music on Mac

---

Apart from fading in/fading out the audio, we also want to introduce the video fade-in and fade-out effects, which will help your video to get more attention. Watch the tutorial below to get detailed information about how to fade in/fade out your videos easily.

Related : How to Fade-in and Fade-out Video Clips

After adding the fade-in and fade-out effects to your video, let’s check how to fade your music and audio in iMovie first, and then we will show you how to fade in/fade out your music and audio file in an easier way.

You may also like:

• iMovie for Windows: 10 Best iMovie Alternatives for You
• How to Add Audio to Your Videos
• How to Add Video Effects in iMovie

---

Part 1: How to Fade Music and Audio in iMovie on Mac

There are two ways available to fade music and audio with iMovie. One is using the fade handles, and the other is using the audio inspector. Before using iMovie audio fade-out effects, please import your video and audio files to iMovie and start a new project.

Method 1: Use Fade Handles to Add Fade in/Fade out Effect in iMovie

Firstly, let’s take a look at the video below to check how to fade audio in/out the audio in iMovie with fade handles.

Step 1. Enable Audio Waveform

When the project opens, check “Show Waveforms” at the bottom of the Project window.

Note: The Blue waveforms indicate the sound recorded within your video clips. Green and purple waveforms indicate sounds and music you’ve added to your project.

Step 2. Move Pointer to Apply Fade Effects

Move the pointer over a waveform, and drag the small gray fade handle at the left of the clip to adjust the fade audio in effect. Then drag the small fade handle at the right of the clip to adjust the fade-out effect.

Step 3. Playback to Check

Move the playhead to the beginning part of the clips with fade effects to check the fade-in and fade-out effects. If everything works OK, uncheck “Show Waveforms” to hide the waveforms.

Related: How to Remove Background Noise from Video

Method 2: Use the Audio Inspector to Apply Fade in/Fade Out Effect in iMovie

To fade audios in and out in iMovie with the audio inspector, you can follow these steps:

Step 1. Open Your iMovie Project and Select a Clip

Double-click the video clip, choose “Clip Adjustments” to open the Inspector, and then click the “Audio” tab.

If there are two audio tracks, and you want to set the fade in and fade out in iMovie for the background music, you can double-click the background music clip to open the audio inspector. This inspector is a little different. If you don’t know how to add background music to iMovie, you can refer to this post: add background music in iMovie .

Step 2. Set the Fade In and Fade Out Effect

In the window, you can manually set the fade-in and fade-out length by dragging the slider bar to the right or left.

If you do not choose “Manual”, that means you’d like iMovie to automatically set it for you. Usually, when you drag video clips to the Project, iMovie will set the fade-in and fade-out effect randomly by increasing the audio volume at the beginning of the clip and decrease the volume at the end of the clip.

If you manually adjust the effect, you can have a better effect.

Step 3. Save the Audio Fade In and Out Effect

After the settings, you can preview the effect in the viewing window to make sure all goes well, and you are much satisfied. Then click “Done” to save the audio fade-in and fade-out effects in iMovie.

Now, that’s done! I hope the above information does help you to set the fade effects to smooth your video and audio transitions.

Related: How to Get More iMovie Themes

Part 2: An Easier Way to Fade Audio and Music on Mac

Let watch the video below to check how to apply fade-in and fade-out effects in an easier way with Wondershare Filmora for Mac. And download it now to try it by yourself.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

If you want to quickly apply fade-in or fade-out effects, iMovie’s alternative for Mac - Wondershare Filmora can help you. It enables you to easily edit videos. After you’ve made your creation, it also allows you to directly upload the complete video file to YouTube and Vimeo for sharing. Check out the quick guide below to see how to add audio fade effects in Filmora.

Step 1. Import Your Video

Import the video clip you want to add audio in and out effect. To do this, click “File” > “Import Media” to import your local file to the user’s album. Or you can drag and drop these target files from the computer to this app’s album.

Step 2. Add the Audio Fade In/Out Effect to Your Video

Place the video onto the timeline. Double-click on it and then choose “Audio”. In the tab, you can drag the slider bar to the right or left to manually set the fade in and fade out the length.

Step 3. Save Your Video

Click the “Export” button to select one of the export methods. You can choose your desired format or mobile devices, burn it to DVD and upload it to YouTube and Vimeo.

That’s all about how to fade music and audio with iMovie and its alternative. If you want to learn more about how to edit video clips with Filmora, you can visit its YouTube channel to get more detailed information. Feel free to leave comments below if you need further assistance.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Fade-in and fade-out effects can help you smooth the video, music, and audio transitions, thus you can make a better movie. When editing videos in iMovie, people may have many video clips and transitions connected to the clips. The fade in and fade out effect seems more important than ever. This tutorial will show you how to fade music and audio in iMovie.

• Part 1: How to Fade Music and Audio in iMovie on Mac
• Part 2: An Easier Way to Fade Audio and Music on Mac

---

Apart from fading in/fading out the audio, we also want to introduce the video fade-in and fade-out effects, which will help your video to get more attention. Watch the tutorial below to get detailed information about how to fade in/fade out your videos easily.

Related : How to Fade-in and Fade-out Video Clips

After adding the fade-in and fade-out effects to your video, let’s check how to fade your music and audio in iMovie first, and then we will show you how to fade in/fade out your music and audio file in an easier way.

You may also like:

• iMovie for Windows: 10 Best iMovie Alternatives for You
• How to Add Audio to Your Videos
• How to Add Video Effects in iMovie

---

Part 1: How to Fade Music and Audio in iMovie on Mac

There are two ways available to fade music and audio with iMovie. One is using the fade handles, and the other is using the audio inspector. Before using iMovie audio fade-out effects, please import your video and audio files to iMovie and start a new project.

Method 1: Use Fade Handles to Add Fade in/Fade out Effect in iMovie

Firstly, let’s take a look at the video below to check how to fade audio in/out the audio in iMovie with fade handles.

Step 1. Enable Audio Waveform

When the project opens, check “Show Waveforms” at the bottom of the Project window.

Note: The Blue waveforms indicate the sound recorded within your video clips. Green and purple waveforms indicate sounds and music you’ve added to your project.

Step 2. Move Pointer to Apply Fade Effects

Move the pointer over a waveform, and drag the small gray fade handle at the left of the clip to adjust the fade audio in effect. Then drag the small fade handle at the right of the clip to adjust the fade-out effect.

Step 3. Playback to Check

Move the playhead to the beginning part of the clips with fade effects to check the fade-in and fade-out effects. If everything works OK, uncheck “Show Waveforms” to hide the waveforms.

Related: How to Remove Background Noise from Video

Method 2: Use the Audio Inspector to Apply Fade in/Fade Out Effect in iMovie

To fade audios in and out in iMovie with the audio inspector, you can follow these steps:

Step 1. Open Your iMovie Project and Select a Clip

Double-click the video clip, choose “Clip Adjustments” to open the Inspector, and then click the “Audio” tab.

If there are two audio tracks, and you want to set the fade in and fade out in iMovie for the background music, you can double-click the background music clip to open the audio inspector. This inspector is a little different. If you don’t know how to add background music to iMovie, you can refer to this post: add background music in iMovie .

Step 2. Set the Fade In and Fade Out Effect

In the window, you can manually set the fade-in and fade-out length by dragging the slider bar to the right or left.

If you do not choose “Manual”, that means you’d like iMovie to automatically set it for you. Usually, when you drag video clips to the Project, iMovie will set the fade-in and fade-out effect randomly by increasing the audio volume at the beginning of the clip and decrease the volume at the end of the clip.

If you manually adjust the effect, you can have a better effect.

Step 3. Save the Audio Fade In and Out Effect

After the settings, you can preview the effect in the viewing window to make sure all goes well, and you are much satisfied. Then click “Done” to save the audio fade-in and fade-out effects in iMovie.

Now, that’s done! I hope the above information does help you to set the fade effects to smooth your video and audio transitions.

Related: How to Get More iMovie Themes

Part 2: An Easier Way to Fade Audio and Music on Mac

Let watch the video below to check how to apply fade-in and fade-out effects in an easier way with Wondershare Filmora for Mac. And download it now to try it by yourself.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

If you want to quickly apply fade-in or fade-out effects, iMovie’s alternative for Mac - Wondershare Filmora can help you. It enables you to easily edit videos. After you’ve made your creation, it also allows you to directly upload the complete video file to YouTube and Vimeo for sharing. Check out the quick guide below to see how to add audio fade effects in Filmora.

Step 1. Import Your Video

Import the video clip you want to add audio in and out effect. To do this, click “File” > “Import Media” to import your local file to the user’s album. Or you can drag and drop these target files from the computer to this app’s album.

Step 2. Add the Audio Fade In/Out Effect to Your Video

Place the video onto the timeline. Double-click on it and then choose “Audio”. In the tab, you can drag the slider bar to the right or left to manually set the fade in and fade out the length.

Step 3. Save Your Video

Click the “Export” button to select one of the export methods. You can choose your desired format or mobile devices, burn it to DVD and upload it to YouTube and Vimeo.

That’s all about how to fade music and audio with iMovie and its alternative. If you want to learn more about how to edit video clips with Filmora, you can visit its YouTube channel to get more detailed information. Feel free to leave comments below if you need further assistance.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Methods to Manipulate Amplitude in MP3, WAV, and MPEG Files

How to Change Volume in Media Files with Filmora

Liza Brown

Mar 27, 2024• Proven solutions

Want a program that can change audio volume so that it won’t be too loud or too quiet? Though many media players or speakers have volume control during playback, it still can be an annoying problem and it takes time to set it. And some downloaded files are rather low to listen to even you raise the volume to the maximum level on the computer. So it’s advisable to normalize the volume permanently.

Thanks to Wondershare Filmora , a professional video editing tool that makes it remarkably easy to increase/decrease the audio level to a professional sound. Below I’ll describe how to do this in a few clicks.

Note: This program is available on both Windows and Mac platforms. Below guide, I’ll take the Windows screenshots. For users who want to adjust the audio volume on Mac, just follow the same steps using Wondershare Filmora for Mac .

1. Import your media files

After downloaded and installed this increasing volume software, simply drag and drop audio & video files to the primary window. Alternatively, you can click “Import” to browse your file folder and load them all. After that, drag and drop them into the Video Timeline.

Note that almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and so on.

2. Change audio volume with ease

When the video file is in place, double click it to reveal the editing panel. This panel contains both video and audio editing. To edit the audio file only, just click the Audio column at the bottom to access the audio editing window. In the voice volume control submenu, move the Volume slidebar left or right to increase or lower down the volume. When you adjust it, you can listen to the real-time audio effect by clicking the play icon.

Just as shown in the image window, you can also set Fade in/fade out, fine-tune the pitch, etc.

3. Save the changed audio(video) file

When you’re satisfied with the result, simply hit “Create” to save your changed audio(video) file. In the output format window that shows, choose your wanted format to save it on the specified folder on your computer.

Besides export video to your computer, you can export to presets for your device like the iPhone 5, iPad mini, iPod Touch, Xbox 360, PS3, directly upload a video to YouTube, or burn to DVD.

Bonus Tips: How to Use Audio Ducking in Filmora?

Besides adjusting the audio volume, you can do more with this versatile video editor software.

Did you heard of audio ducking and have any idea about it? As a matter of fact, audio ducking means turning down the volume of background music to make your vocal to be heard more clearly. Here is the ultimate guide of audio ducking in Filmora .

Learn More about Video Editing

• Picture-in-picture : Put multiple videos in the same frame to tell several threads of one story.
• Freeze a frame : Focus on a face in the crowd, and set zoom in and out motion to make fun!
• Auto scene detection : Seek and split the scene changes to easily find the right shots.
• And more…

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Want a program that can change audio volume so that it won’t be too loud or too quiet? Though many media players or speakers have volume control during playback, it still can be an annoying problem and it takes time to set it. And some downloaded files are rather low to listen to even you raise the volume to the maximum level on the computer. So it’s advisable to normalize the volume permanently.

Thanks to Wondershare Filmora , a professional video editing tool that makes it remarkably easy to increase/decrease the audio level to a professional sound. Below I’ll describe how to do this in a few clicks.

Note: This program is available on both Windows and Mac platforms. Below guide, I’ll take the Windows screenshots. For users who want to adjust the audio volume on Mac, just follow the same steps using Wondershare Filmora for Mac .

1. Import your media files

After downloaded and installed this increasing volume software, simply drag and drop audio & video files to the primary window. Alternatively, you can click “Import” to browse your file folder and load them all. After that, drag and drop them into the Video Timeline.

Note that almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and so on.

2. Change audio volume with ease

When the video file is in place, double click it to reveal the editing panel. This panel contains both video and audio editing. To edit the audio file only, just click the Audio column at the bottom to access the audio editing window. In the voice volume control submenu, move the Volume slidebar left or right to increase or lower down the volume. When you adjust it, you can listen to the real-time audio effect by clicking the play icon.

Just as shown in the image window, you can also set Fade in/fade out, fine-tune the pitch, etc.

3. Save the changed audio(video) file

When you’re satisfied with the result, simply hit “Create” to save your changed audio(video) file. In the output format window that shows, choose your wanted format to save it on the specified folder on your computer.

Besides export video to your computer, you can export to presets for your device like the iPhone 5, iPad mini, iPod Touch, Xbox 360, PS3, directly upload a video to YouTube, or burn to DVD.

Bonus Tips: How to Use Audio Ducking in Filmora?

Besides adjusting the audio volume, you can do more with this versatile video editor software.

Did you heard of audio ducking and have any idea about it? As a matter of fact, audio ducking means turning down the volume of background music to make your vocal to be heard more clearly. Here is the ultimate guide of audio ducking in Filmora .

Learn More about Video Editing

• Picture-in-picture : Put multiple videos in the same frame to tell several threads of one story.
• Freeze a frame : Focus on a face in the crowd, and set zoom in and out motion to make fun!
• Auto scene detection : Seek and split the scene changes to easily find the right shots.
• And more…

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Want a program that can change audio volume so that it won’t be too loud or too quiet? Though many media players or speakers have volume control during playback, it still can be an annoying problem and it takes time to set it. And some downloaded files are rather low to listen to even you raise the volume to the maximum level on the computer. So it’s advisable to normalize the volume permanently.

Thanks to Wondershare Filmora , a professional video editing tool that makes it remarkably easy to increase/decrease the audio level to a professional sound. Below I’ll describe how to do this in a few clicks.

Note: This program is available on both Windows and Mac platforms. Below guide, I’ll take the Windows screenshots. For users who want to adjust the audio volume on Mac, just follow the same steps using Wondershare Filmora for Mac .

1. Import your media files

After downloaded and installed this increasing volume software, simply drag and drop audio & video files to the primary window. Alternatively, you can click “Import” to browse your file folder and load them all. After that, drag and drop them into the Video Timeline.

Note that almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and so on.

2. Change audio volume with ease

When the video file is in place, double click it to reveal the editing panel. This panel contains both video and audio editing. To edit the audio file only, just click the Audio column at the bottom to access the audio editing window. In the voice volume control submenu, move the Volume slidebar left or right to increase or lower down the volume. When you adjust it, you can listen to the real-time audio effect by clicking the play icon.

Just as shown in the image window, you can also set Fade in/fade out, fine-tune the pitch, etc.

3. Save the changed audio(video) file

When you’re satisfied with the result, simply hit “Create” to save your changed audio(video) file. In the output format window that shows, choose your wanted format to save it on the specified folder on your computer.

Besides export video to your computer, you can export to presets for your device like the iPhone 5, iPad mini, iPod Touch, Xbox 360, PS3, directly upload a video to YouTube, or burn to DVD.

Bonus Tips: How to Use Audio Ducking in Filmora?

Besides adjusting the audio volume, you can do more with this versatile video editor software.

Did you heard of audio ducking and have any idea about it? As a matter of fact, audio ducking means turning down the volume of background music to make your vocal to be heard more clearly. Here is the ultimate guide of audio ducking in Filmora .

Learn More about Video Editing

• Picture-in-picture : Put multiple videos in the same frame to tell several threads of one story.
• Freeze a frame : Focus on a face in the crowd, and set zoom in and out motion to make fun!
• Auto scene detection : Seek and split the scene changes to easily find the right shots.
• And more…

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Want a program that can change audio volume so that it won’t be too loud or too quiet? Though many media players or speakers have volume control during playback, it still can be an annoying problem and it takes time to set it. And some downloaded files are rather low to listen to even you raise the volume to the maximum level on the computer. So it’s advisable to normalize the volume permanently.

Thanks to Wondershare Filmora , a professional video editing tool that makes it remarkably easy to increase/decrease the audio level to a professional sound. Below I’ll describe how to do this in a few clicks.

Note: This program is available on both Windows and Mac platforms. Below guide, I’ll take the Windows screenshots. For users who want to adjust the audio volume on Mac, just follow the same steps using Wondershare Filmora for Mac .

1. Import your media files

After downloaded and installed this increasing volume software, simply drag and drop audio & video files to the primary window. Alternatively, you can click “Import” to browse your file folder and load them all. After that, drag and drop them into the Video Timeline.

Note that almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and so on.

2. Change audio volume with ease

When the video file is in place, double click it to reveal the editing panel. This panel contains both video and audio editing. To edit the audio file only, just click the Audio column at the bottom to access the audio editing window. In the voice volume control submenu, move the Volume slidebar left or right to increase or lower down the volume. When you adjust it, you can listen to the real-time audio effect by clicking the play icon.

Just as shown in the image window, you can also set Fade in/fade out, fine-tune the pitch, etc.

3. Save the changed audio(video) file

When you’re satisfied with the result, simply hit “Create” to save your changed audio(video) file. In the output format window that shows, choose your wanted format to save it on the specified folder on your computer.

Besides export video to your computer, you can export to presets for your device like the iPhone 5, iPad mini, iPod Touch, Xbox 360, PS3, directly upload a video to YouTube, or burn to DVD.

Bonus Tips: How to Use Audio Ducking in Filmora?

Besides adjusting the audio volume, you can do more with this versatile video editor software.

Did you heard of audio ducking and have any idea about it? As a matter of fact, audio ducking means turning down the volume of background music to make your vocal to be heard more clearly. Here is the ultimate guide of audio ducking in Filmora .

Learn More about Video Editing

• Picture-in-picture : Put multiple videos in the same frame to tell several threads of one story.
• Freeze a frame : Focus on a face in the crowd, and set zoom in and out motion to make fun!
• Auto scene detection : Seek and split the scene changes to easily find the right shots.
• And more…

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Unlocking the Full Potential of Audacity: A Comprehensive Installation and Removal Manual for Ubuntu Users

Open-source audio editor Audacity is available for free download and usage. It is one of the most popular multi-track audio editing tools for Windows, Mac OS X, and Linux. Audio recordings may be recorded, edited, spliced, and altered with Audacity. How to install Audacity on your Ubuntu 20.04 LTS system is explained in this post.

Key Features of Audacity

• Creative Commons Attribution-NonCommercial-ShareAlike License
• It is a cross-platform program
• Sound files may be imported, edited, and combined. Use a variety of file types when exporting your recordings. You may even export many files at once.
• Record and playback live sound
• Audio Quality: Audacity can playback 16-bit, 24-bit, and 32-bit audio files, respectively.
• Accessible in 38 different dialects
• Assistive Listening Device
• Keyboard shortcuts are many
• A wide range of audio formats is supported, including AIFF, WAV, FLAC, and MP2.
• With the keyboard, tracks and choices may be handled to their greatest extent
• VST and Audio Unit effect plug-ins are supported. Plug-ins may even be written by you.
• Duplicate, chop, combine, or splice together several sound documents.
• There is a slew of others…

Installation

The official website for Audacity shows version 2.4.2 as the most recent release. Download the newest version of Audacity for Ubuntu 20.04 and then install it.

• Install Audacity via PPA
• Install Audacity via Snap Store

First, we’ll use the PPA approach to install Audacity.

Install Audacity via PPA

Installing Audacity on an Ubuntu system is as simple as entering the following line in the terminal to include the unofficial PPA developed by “ubuntuhandbook” to the Ubuntu system’s software sources, then rebooting.

You will be prompted to hit the Enter key to proceed with the process of adding your Audacity package to your sources list. To begin the process of introducing PPA to the sources list, press the Enter key.

After you’ve added the Audacity package to the system’s software sources, you’ll need to update the package repository in order to get Audacity to work.

As soon as you have updated the package repository, you should be able to successfully install Audacity.

Navigate to Activities & type in the word ‘audacity’ to find it.

As you can see in the picture, Audacity has been successfully installed and is ready for usage on my PC.

Installing Audacity from the Snap Store

A version of Audacity is also available for download via the Snap shop. Using a Snap is among the quickest and most straightforward methods of installing any program since it takes into account all of the application’s updates and dependencies. In order to install Audacity using Snap, you must first ensure that Snap is already installed on the Ubuntu system. Snap is pre-installed in the newest versions of Ubuntu and is available as a default. If Snap is not already installed on your system, you may do it by using the instructions shown below.

After safely installing Snap, you’ll be able to proceed to install Audacity by using the script provided in the next section.

It will just take a few minutes to download & install Audacity on your computer.

As soon as Audacity has been installed via the Snap method, launch the program by searching for the phrase ‘audacity’ in the Application menu.

To launch Audacity, click on the Audacity icon on your desktop.

How to uninstall Audacity Ubuntu

For whatever reason, if you wish to remove the Audacity program from your computer, you may follow these instructions.

Method 1

If you installed Audacity through the Snap method, execute the following command in your terminal: $ sudo snap remove Audacity

Method 2

If you have installed the application using the PPA, you may remove it by performing the instructions shown below.

>Step 1:

The first step is to

This indicates that the add-apt-repository command was used to add the PPA to your system. You may also use the same command to uninstall the PPA from your computer. Simply include the —remove option in your command.

$ sudo add-apt-repository –remove ppa:ubuntuhandbook1/audacity

>Step 2:

As of the right moment, the PPA has been withdrawn. What happens to the programs that are installed using these PPAs? Will they be eliminated as a consequence of the abolition of the Patriot Act? The answer is a resounding no.

Thus, PPA-purge enters the scene to help solve the problem. The PPA is disabled, but all of the apps installed by the PPA are also uninstalled, or they are reverted to the original versions given by your distribution.

Install the PPA-purge package and remove the Audacity package may be accomplished by running the following command.

$ sudo apt install ppa-purge && sudo ppa-purge ppa:ubuntuhandbook1/audacity

Conclusion

I hope you now have a clear grasp of installing and uninstalling Audacity on Ubuntu 20.04 LTS Focal Fossa. I hope this article has been helpful. Additionally, we cover Filmora’s voice effects & how users may use the program to improve and change their own voices. Filmora allows you to re-voice video/audio & previously recorded voiceovers. The Pitch option on the Timeline may be used with video/audio and voiceover files. Change the tone of a video and recording to make it sound unique. You may quickly alter the voices in the videos with Filmora. A story or video should accompany your viral. Allows you to alter the pitch of your voice by selecting the Changing Pitch option. You may adjust the video’s pace (Optional). Make a duplicate of the video or audio that has been altered.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You will be prompted to hit the Enter key to proceed with the process of adding your Audacity package to your sources list. To begin the process of introducing PPA to the sources list, press the Enter key.

After you’ve added the Audacity package to the system’s software sources, you’ll need to update the package repository in order to get Audacity to work.

As soon as you have updated the package repository, you should be able to successfully install Audacity.

Navigate to Activities & type in the word ‘audacity’ to find it.

As you can see in the picture, Audacity has been successfully installed and is ready for usage on my PC.

Installing Audacity from the Snap Store

A version of Audacity is also available for download via the Snap shop. Using a Snap is among the quickest and most straightforward methods of installing any program since it takes into account all of the application’s updates and dependencies. In order to install Audacity using Snap, you must first ensure that Snap is already installed on the Ubuntu system. Snap is pre-installed in the newest versions of Ubuntu and is available as a default. If Snap is not already installed on your system, you may do it by using the instructions shown below.

After safely installing Snap, you’ll be able to proceed to install Audacity by using the script provided in the next section.

It will just take a few minutes to download & install Audacity on your computer.

As soon as Audacity has been installed via the Snap method, launch the program by searching for the phrase ‘audacity’ in the Application menu.

To launch Audacity, click on the Audacity icon on your desktop.

How to uninstall Audacity Ubuntu

For whatever reason, if you wish to remove the Audacity program from your computer, you may follow these instructions.

Method 1

If you installed Audacity through the Snap method, execute the following command in your terminal: $ sudo snap remove Audacity

Method 2

If you have installed the application using the PPA, you may remove it by performing the instructions shown below.

>Step 1:

The first step is to

This indicates that the add-apt-repository command was used to add the PPA to your system. You may also use the same command to uninstall the PPA from your computer. Simply include the —remove option in your command.

$ sudo add-apt-repository –remove ppa:ubuntuhandbook1/audacity

>Step 2:

As of the right moment, the PPA has been withdrawn. What happens to the programs that are installed using these PPAs? Will they be eliminated as a consequence of the abolition of the Patriot Act? The answer is a resounding no.

Thus, PPA-purge enters the scene to help solve the problem. The PPA is disabled, but all of the apps installed by the PPA are also uninstalled, or they are reverted to the original versions given by your distribution.

Install the PPA-purge package and remove the Audacity package may be accomplished by running the following command.

$ sudo apt install ppa-purge && sudo ppa-purge ppa:ubuntuhandbook1/audacity

Conclusion

I hope you now have a clear grasp of installing and uninstalling Audacity on Ubuntu 20.04 LTS Focal Fossa. I hope this article has been helpful. Additionally, we cover Filmora’s voice effects & how users may use the program to improve and change their own voices. Filmora allows you to re-voice video/audio & previously recorded voiceovers. The Pitch option on the Timeline may be used with video/audio and voiceover files. Change the tone of a video and recording to make it sound unique. You may quickly alter the voices in the videos with Filmora. A story or video should accompany your viral. Allows you to alter the pitch of your voice by selecting the Changing Pitch option. You may adjust the video’s pace (Optional). Make a duplicate of the video or audio that has been altered.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You will be prompted to hit the Enter key to proceed with the process of adding your Audacity package to your sources list. To begin the process of introducing PPA to the sources list, press the Enter key.

After you’ve added the Audacity package to the system’s software sources, you’ll need to update the package repository in order to get Audacity to work.

As soon as you have updated the package repository, you should be able to successfully install Audacity.

Navigate to Activities & type in the word ‘audacity’ to find it.

As you can see in the picture, Audacity has been successfully installed and is ready for usage on my PC.

Installing Audacity from the Snap Store

A version of Audacity is also available for download via the Snap shop. Using a Snap is among the quickest and most straightforward methods of installing any program since it takes into account all of the application’s updates and dependencies. In order to install Audacity using Snap, you must first ensure that Snap is already installed on the Ubuntu system. Snap is pre-installed in the newest versions of Ubuntu and is available as a default. If Snap is not already installed on your system, you may do it by using the instructions shown below.

After safely installing Snap, you’ll be able to proceed to install Audacity by using the script provided in the next section.

It will just take a few minutes to download & install Audacity on your computer.

As soon as Audacity has been installed via the Snap method, launch the program by searching for the phrase ‘audacity’ in the Application menu.

To launch Audacity, click on the Audacity icon on your desktop.

How to uninstall Audacity Ubuntu

For whatever reason, if you wish to remove the Audacity program from your computer, you may follow these instructions.

Method 1

If you installed Audacity through the Snap method, execute the following command in your terminal: $ sudo snap remove Audacity

Method 2

If you have installed the application using the PPA, you may remove it by performing the instructions shown below.

>Step 1:

The first step is to

This indicates that the add-apt-repository command was used to add the PPA to your system. You may also use the same command to uninstall the PPA from your computer. Simply include the —remove option in your command.

$ sudo add-apt-repository –remove ppa:ubuntuhandbook1/audacity

>Step 2:

As of the right moment, the PPA has been withdrawn. What happens to the programs that are installed using these PPAs? Will they be eliminated as a consequence of the abolition of the Patriot Act? The answer is a resounding no.

Thus, PPA-purge enters the scene to help solve the problem. The PPA is disabled, but all of the apps installed by the PPA are also uninstalled, or they are reverted to the original versions given by your distribution.

Install the PPA-purge package and remove the Audacity package may be accomplished by running the following command.

$ sudo apt install ppa-purge && sudo ppa-purge ppa:ubuntuhandbook1/audacity

Conclusion

I hope you now have a clear grasp of installing and uninstalling Audacity on Ubuntu 20.04 LTS Focal Fossa. I hope this article has been helpful. Additionally, we cover Filmora’s voice effects & how users may use the program to improve and change their own voices. Filmora allows you to re-voice video/audio & previously recorded voiceovers. The Pitch option on the Timeline may be used with video/audio and voiceover files. Change the tone of a video and recording to make it sound unique. You may quickly alter the voices in the videos with Filmora. A story or video should accompany your viral. Allows you to alter the pitch of your voice by selecting the Changing Pitch option. You may adjust the video’s pace (Optional). Make a duplicate of the video or audio that has been altered.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You will be prompted to hit the Enter key to proceed with the process of adding your Audacity package to your sources list. To begin the process of introducing PPA to the sources list, press the Enter key.

After you’ve added the Audacity package to the system’s software sources, you’ll need to update the package repository in order to get Audacity to work.

As soon as you have updated the package repository, you should be able to successfully install Audacity.

Navigate to Activities & type in the word ‘audacity’ to find it.

As you can see in the picture, Audacity has been successfully installed and is ready for usage on my PC.

Installing Audacity from the Snap Store

A version of Audacity is also available for download via the Snap shop. Using a Snap is among the quickest and most straightforward methods of installing any program since it takes into account all of the application’s updates and dependencies. In order to install Audacity using Snap, you must first ensure that Snap is already installed on the Ubuntu system. Snap is pre-installed in the newest versions of Ubuntu and is available as a default. If Snap is not already installed on your system, you may do it by using the instructions shown below.

After safely installing Snap, you’ll be able to proceed to install Audacity by using the script provided in the next section.

It will just take a few minutes to download & install Audacity on your computer.

As soon as Audacity has been installed via the Snap method, launch the program by searching for the phrase ‘audacity’ in the Application menu.

To launch Audacity, click on the Audacity icon on your desktop.

How to uninstall Audacity Ubuntu

For whatever reason, if you wish to remove the Audacity program from your computer, you may follow these instructions.

Method 1

If you installed Audacity through the Snap method, execute the following command in your terminal: $ sudo snap remove Audacity

Method 2

If you have installed the application using the PPA, you may remove it by performing the instructions shown below.

>Step 1:

The first step is to

This indicates that the add-apt-repository command was used to add the PPA to your system. You may also use the same command to uninstall the PPA from your computer. Simply include the —remove option in your command.

$ sudo add-apt-repository –remove ppa:ubuntuhandbook1/audacity

>Step 2:

As of the right moment, the PPA has been withdrawn. What happens to the programs that are installed using these PPAs? Will they be eliminated as a consequence of the abolition of the Patriot Act? The answer is a resounding no.

Thus, PPA-purge enters the scene to help solve the problem. The PPA is disabled, but all of the apps installed by the PPA are also uninstalled, or they are reverted to the original versions given by your distribution.

Install the PPA-purge package and remove the Audacity package may be accomplished by running the following command.

$ sudo apt install ppa-purge && sudo ppa-purge ppa:ubuntuhandbook1/audacity

Conclusion

I hope you now have a clear grasp of installing and uninstalling Audacity on Ubuntu 20.04 LTS Focal Fossa. I hope this article has been helpful. Additionally, we cover Filmora’s voice effects & how users may use the program to improve and change their own voices. Filmora allows you to re-voice video/audio & previously recorded voiceovers. The Pitch option on the Timeline may be used with video/audio and voiceover files. Change the tone of a video and recording to make it sound unique. You may quickly alter the voices in the videos with Filmora. A story or video should accompany your viral. Allows you to alter the pitch of your voice by selecting the Changing Pitch option. You may adjust the video’s pace (Optional). Make a duplicate of the video or audio that has been altered.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Also read: