“Revamping Your Soundtrack? Check Out the Best Audio Normalizers for Windows Users “

An audio normalizer is a tool that helps to change the overall volume of audio by a set amount to reach a predetermined level. In simple words, it can be defined as turning up the volume of an audio file without losing the audio quality.

Sound normalization is done for mainly two reasons. One is to increase the volume of a quiet audio file without making changes in its dynamic range for easy and better hearing. The other reason is to achieve matching volumes for different audio files.

While the sound of the audio gets increased during audio normalization, the noise will also get increased. So make sure that normalization is done properly within the right limit.

Top 10 Audio Normalizers for Windows

Audio normalization was commonly done in the early days when digital audio was enjoyed. The performance of many audio components was limited in signal-to-noise ratio and dynamic range, and sound normalization helped.

Normalization is still a useful feature that helps to equalize volume in different files. Let us look at some of the best audio normalizers available in Windows.

1. Wondershare Filmora

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Wondershare Filmora is a widely used video editing application famous for its extensive video and audio editing features. The Auto Normalization in Filmora is an AI integrated feature that analyses the volume of all the clips you have selected. It then automatically adjusts the volumes to 23.0LUFS, the standard loudness level of European audio programs.

To enable Auto Normalization on Filmora:

Go to the timeline and double click on the audio clip you wish to normalize, and from the window that appears, go to Audio, select Audio Normalization, and tap OK.

The audio will be analyzed and normalized automatically within some time.

2. Audacity

Audacity is a free and open-sourced audio software used on all operating systems. Its simple interface and compatibility across different platforms are the main reasons for its popularity.

The sound normalization feature of audacity can be used to set the peak amplitude of any track. It also allows to equalize the balance of the right and left channels of any stereo tracks.

Open audacity, click on Effect from the top toolbar, and then select Normalize. Three different options will be given for you to apply.

You can remove the DC offset, independently normalize stereo channels or normalize the maximum amplitude to your desired decibel.

3. Adobe Premiere Pro

As you all might know Adobe premium pro is a wonderful video editing application used by beginners and professionals alike. To normalize audio on adobe premium pro, go to the timeline, right-click on the audio file, and tap on Audio Gain…

A small window will appear, from which you can select the Normalize Max Peak to: option. The dB can be manually adjusted to your desired limit.

Click OK after making the necessary adjustments, and the changes will take place instantly.

4. MP3Gain

MP3Gain is an audio normalizing tool that analyses and adjusts the volumes of mp3 files so that they all have the same volume. They also ensure the original quality after the sound normalization process.

After the installation of MP3 gain on your device open it. Select Options, then Filename Display, and then Show File Only. Then tap on Add File(s) and add the files you need to normalize to MP3Gain.

This application can be used to play several songs at the same volume and the need to adjust the volume at the beginning of each song can be avoided.

5. VLC Video Player

Even though you might be familiar with VLC as a video player, it has many features that help to make changes in the audio and video of a file.

The player has a built-in sound normalization feature that can be enabled when needed. Open the player and tap on Tools from the top toolbar and then on the Preferences option. Choose to show All settings from the bottom right and select Filters under the Audio from the left panel. Tick mark the Volume normalizer option and hit the Save button.

The volume level can also be adjusted from the Volume normalizer panel under the Filters option.

6. Final Cut Pro

Final cut pro x is a non-linear and nondestructive video application commonly used on Apple devices. This application offers improved rendering, playback, and transcoding.

To normalize audio on final cut pro x, open the application and tap on the Modify option, then on Audio, and finally on Apply Normalization Gain.

To normalize more than one audio clip make sure that the audio level of each clip is set to 0 dB. This can be done by tapping on Edit and then on Remove Attributes. So for better results, make sure that the audio level of each clip is set to 0dB before normalization.

7. Handbrake

Handbrake is an open-source video transcoder that can convert any video format to any desired codecs. It also has some video and audio editing features. The sound normalization feature in Handbrake allows the user to adjust the dynamic range of some of the audio formats.

To increase the audio gain on Handbrake, select Source on the app and make sure the video file and destination are correct. Then click on the Audio option and adjust the Gain.

8. Reaper

Reaper is an all-in-one audio production application that offers extensive audio editing features, including MIDI recording, editing, mixing, processing, etc. To bring the volume level to a higher level using an audio normalizer in Reaper, open the application and import the audio files.

Reaper offers keyboard shortcuts for applying different features and normalizing audio on PC. The shortcut is Control + Shift + N.

This app also allows manual normalization using a knob which can be done according to the user preference.

9. AIMP

AIMP is a freeware audio player used by many android and windows users to enjoy music. This player offers an audio normalization feature that can be applied to all the files by default.

To do so, go to DSP manager in AIMP and click on the Volume normalization tab. Mark the Normalize volume option and make changes to the settings.

You can adjust the target volume level, the upper threshold of the preamp, and the lower threshold of preamp in the settings. The app also allows making changes to the gain values.

10. Movavi

Movavi is a video editor with a very intuitive interface and a big collection of effects. Normalizing the audio using Movavi is very simple, and to do so, open the application and import the file first to the timeline.

Double click on the file on the timeline and click on Clip Properties. From the General tab, tick mark the Normalize box, and the whole audio track will be normalized.

What is the best audio normalizer for you?

An audio normalizer can be used for a variety of purposes. Some people use it to play songs without having to adjust the volume for each song manually, others use it for enhancing the volume of songs that has a very low volume, and some others use it for video editing purposes.

A list of applications with sound normalizers has been listed above, and you can choose any one of them depending on your purpose. Some of these apps, like Wondershare Filmora, Final Cut Pro X offers extensive audio editing features and audio normalization, which can be very helpful in video editing. If you wish to increase the volume of the files while playing, you can go with VLC, MP3Gain, etc. Hope our suggestion helps to provide you with a better audio experience.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Wondershare Filmora is a widely used video editing application famous for its extensive video and audio editing features. The Auto Normalization in Filmora is an AI integrated feature that analyses the volume of all the clips you have selected. It then automatically adjusts the volumes to 23.0LUFS, the standard loudness level of European audio programs.

To enable Auto Normalization on Filmora:

Go to the timeline and double click on the audio clip you wish to normalize, and from the window that appears, go to Audio, select Audio Normalization, and tap OK.

The audio will be analyzed and normalized automatically within some time.

2. Audacity

Audacity is a free and open-sourced audio software used on all operating systems. Its simple interface and compatibility across different platforms are the main reasons for its popularity.

The sound normalization feature of audacity can be used to set the peak amplitude of any track. It also allows to equalize the balance of the right and left channels of any stereo tracks.

Open audacity, click on Effect from the top toolbar, and then select Normalize. Three different options will be given for you to apply.

You can remove the DC offset, independently normalize stereo channels or normalize the maximum amplitude to your desired decibel.

3. Adobe Premiere Pro

As you all might know Adobe premium pro is a wonderful video editing application used by beginners and professionals alike. To normalize audio on adobe premium pro, go to the timeline, right-click on the audio file, and tap on Audio Gain…

A small window will appear, from which you can select the Normalize Max Peak to: option. The dB can be manually adjusted to your desired limit.

Click OK after making the necessary adjustments, and the changes will take place instantly.

4. MP3Gain

MP3Gain is an audio normalizing tool that analyses and adjusts the volumes of mp3 files so that they all have the same volume. They also ensure the original quality after the sound normalization process.

After the installation of MP3 gain on your device open it. Select Options, then Filename Display, and then Show File Only. Then tap on Add File(s) and add the files you need to normalize to MP3Gain.

This application can be used to play several songs at the same volume and the need to adjust the volume at the beginning of each song can be avoided.

5. VLC Video Player

Even though you might be familiar with VLC as a video player, it has many features that help to make changes in the audio and video of a file.

The player has a built-in sound normalization feature that can be enabled when needed. Open the player and tap on Tools from the top toolbar and then on the Preferences option. Choose to show All settings from the bottom right and select Filters under the Audio from the left panel. Tick mark the Volume normalizer option and hit the Save button.

The volume level can also be adjusted from the Volume normalizer panel under the Filters option.

6. Final Cut Pro

Final cut pro x is a non-linear and nondestructive video application commonly used on Apple devices. This application offers improved rendering, playback, and transcoding.

To normalize audio on final cut pro x, open the application and tap on the Modify option, then on Audio, and finally on Apply Normalization Gain.

To normalize more than one audio clip make sure that the audio level of each clip is set to 0 dB. This can be done by tapping on Edit and then on Remove Attributes. So for better results, make sure that the audio level of each clip is set to 0dB before normalization.

7. Handbrake

Handbrake is an open-source video transcoder that can convert any video format to any desired codecs. It also has some video and audio editing features. The sound normalization feature in Handbrake allows the user to adjust the dynamic range of some of the audio formats.

To increase the audio gain on Handbrake, select Source on the app and make sure the video file and destination are correct. Then click on the Audio option and adjust the Gain.

8. Reaper

Reaper is an all-in-one audio production application that offers extensive audio editing features, including MIDI recording, editing, mixing, processing, etc. To bring the volume level to a higher level using an audio normalizer in Reaper, open the application and import the audio files.

Reaper offers keyboard shortcuts for applying different features and normalizing audio on PC. The shortcut is Control + Shift + N.

This app also allows manual normalization using a knob which can be done according to the user preference.

9. AIMP

AIMP is a freeware audio player used by many android and windows users to enjoy music. This player offers an audio normalization feature that can be applied to all the files by default.

To do so, go to DSP manager in AIMP and click on the Volume normalization tab. Mark the Normalize volume option and make changes to the settings.

You can adjust the target volume level, the upper threshold of the preamp, and the lower threshold of preamp in the settings. The app also allows making changes to the gain values.

10. Movavi

Movavi is a video editor with a very intuitive interface and a big collection of effects. Normalizing the audio using Movavi is very simple, and to do so, open the application and import the file first to the timeline.

Double click on the file on the timeline and click on Clip Properties. From the General tab, tick mark the Normalize box, and the whole audio track will be normalized.

What is the best audio normalizer for you?

An audio normalizer can be used for a variety of purposes. Some people use it to play songs without having to adjust the volume for each song manually, others use it for enhancing the volume of songs that has a very low volume, and some others use it for video editing purposes.

A list of applications with sound normalizers has been listed above, and you can choose any one of them depending on your purpose. Some of these apps, like Wondershare Filmora, Final Cut Pro X offers extensive audio editing features and audio normalization, which can be very helpful in video editing. If you wish to increase the volume of the files while playing, you can go with VLC, MP3Gain, etc. Hope our suggestion helps to provide you with a better audio experience.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Wondershare Filmora is a widely used video editing application famous for its extensive video and audio editing features. The Auto Normalization in Filmora is an AI integrated feature that analyses the volume of all the clips you have selected. It then automatically adjusts the volumes to 23.0LUFS, the standard loudness level of European audio programs.

To enable Auto Normalization on Filmora:

Go to the timeline and double click on the audio clip you wish to normalize, and from the window that appears, go to Audio, select Audio Normalization, and tap OK.

The audio will be analyzed and normalized automatically within some time.

2. Audacity

Audacity is a free and open-sourced audio software used on all operating systems. Its simple interface and compatibility across different platforms are the main reasons for its popularity.

The sound normalization feature of audacity can be used to set the peak amplitude of any track. It also allows to equalize the balance of the right and left channels of any stereo tracks.

Open audacity, click on Effect from the top toolbar, and then select Normalize. Three different options will be given for you to apply.

You can remove the DC offset, independently normalize stereo channels or normalize the maximum amplitude to your desired decibel.

3. Adobe Premiere Pro

As you all might know Adobe premium pro is a wonderful video editing application used by beginners and professionals alike. To normalize audio on adobe premium pro, go to the timeline, right-click on the audio file, and tap on Audio Gain…

A small window will appear, from which you can select the Normalize Max Peak to: option. The dB can be manually adjusted to your desired limit.

Click OK after making the necessary adjustments, and the changes will take place instantly.

4. MP3Gain

MP3Gain is an audio normalizing tool that analyses and adjusts the volumes of mp3 files so that they all have the same volume. They also ensure the original quality after the sound normalization process.

After the installation of MP3 gain on your device open it. Select Options, then Filename Display, and then Show File Only. Then tap on Add File(s) and add the files you need to normalize to MP3Gain.

This application can be used to play several songs at the same volume and the need to adjust the volume at the beginning of each song can be avoided.

5. VLC Video Player

Even though you might be familiar with VLC as a video player, it has many features that help to make changes in the audio and video of a file.

The player has a built-in sound normalization feature that can be enabled when needed. Open the player and tap on Tools from the top toolbar and then on the Preferences option. Choose to show All settings from the bottom right and select Filters under the Audio from the left panel. Tick mark the Volume normalizer option and hit the Save button.

The volume level can also be adjusted from the Volume normalizer panel under the Filters option.

6. Final Cut Pro

Final cut pro x is a non-linear and nondestructive video application commonly used on Apple devices. This application offers improved rendering, playback, and transcoding.

To normalize audio on final cut pro x, open the application and tap on the Modify option, then on Audio, and finally on Apply Normalization Gain.

To normalize more than one audio clip make sure that the audio level of each clip is set to 0 dB. This can be done by tapping on Edit and then on Remove Attributes. So for better results, make sure that the audio level of each clip is set to 0dB before normalization.

7. Handbrake

Handbrake is an open-source video transcoder that can convert any video format to any desired codecs. It also has some video and audio editing features. The sound normalization feature in Handbrake allows the user to adjust the dynamic range of some of the audio formats.

To increase the audio gain on Handbrake, select Source on the app and make sure the video file and destination are correct. Then click on the Audio option and adjust the Gain.

8. Reaper

Reaper is an all-in-one audio production application that offers extensive audio editing features, including MIDI recording, editing, mixing, processing, etc. To bring the volume level to a higher level using an audio normalizer in Reaper, open the application and import the audio files.

Reaper offers keyboard shortcuts for applying different features and normalizing audio on PC. The shortcut is Control + Shift + N.

This app also allows manual normalization using a knob which can be done according to the user preference.

9. AIMP

AIMP is a freeware audio player used by many android and windows users to enjoy music. This player offers an audio normalization feature that can be applied to all the files by default.

To do so, go to DSP manager in AIMP and click on the Volume normalization tab. Mark the Normalize volume option and make changes to the settings.

You can adjust the target volume level, the upper threshold of the preamp, and the lower threshold of preamp in the settings. The app also allows making changes to the gain values.

10. Movavi

Movavi is a video editor with a very intuitive interface and a big collection of effects. Normalizing the audio using Movavi is very simple, and to do so, open the application and import the file first to the timeline.

Double click on the file on the timeline and click on Clip Properties. From the General tab, tick mark the Normalize box, and the whole audio track will be normalized.

What is the best audio normalizer for you?

An audio normalizer can be used for a variety of purposes. Some people use it to play songs without having to adjust the volume for each song manually, others use it for enhancing the volume of songs that has a very low volume, and some others use it for video editing purposes.

A list of applications with sound normalizers has been listed above, and you can choose any one of them depending on your purpose. Some of these apps, like Wondershare Filmora, Final Cut Pro X offers extensive audio editing features and audio normalization, which can be very helpful in video editing. If you wish to increase the volume of the files while playing, you can go with VLC, MP3Gain, etc. Hope our suggestion helps to provide you with a better audio experience.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Wondershare Filmora is a widely used video editing application famous for its extensive video and audio editing features. The Auto Normalization in Filmora is an AI integrated feature that analyses the volume of all the clips you have selected. It then automatically adjusts the volumes to 23.0LUFS, the standard loudness level of European audio programs.

To enable Auto Normalization on Filmora:

Go to the timeline and double click on the audio clip you wish to normalize, and from the window that appears, go to Audio, select Audio Normalization, and tap OK.

The audio will be analyzed and normalized automatically within some time.

2. Audacity

Audacity is a free and open-sourced audio software used on all operating systems. Its simple interface and compatibility across different platforms are the main reasons for its popularity.

The sound normalization feature of audacity can be used to set the peak amplitude of any track. It also allows to equalize the balance of the right and left channels of any stereo tracks.

Open audacity, click on Effect from the top toolbar, and then select Normalize. Three different options will be given for you to apply.

You can remove the DC offset, independently normalize stereo channels or normalize the maximum amplitude to your desired decibel.

3. Adobe Premiere Pro

As you all might know Adobe premium pro is a wonderful video editing application used by beginners and professionals alike. To normalize audio on adobe premium pro, go to the timeline, right-click on the audio file, and tap on Audio Gain…

A small window will appear, from which you can select the Normalize Max Peak to: option. The dB can be manually adjusted to your desired limit.

Click OK after making the necessary adjustments, and the changes will take place instantly.

4. MP3Gain

MP3Gain is an audio normalizing tool that analyses and adjusts the volumes of mp3 files so that they all have the same volume. They also ensure the original quality after the sound normalization process.

After the installation of MP3 gain on your device open it. Select Options, then Filename Display, and then Show File Only. Then tap on Add File(s) and add the files you need to normalize to MP3Gain.

This application can be used to play several songs at the same volume and the need to adjust the volume at the beginning of each song can be avoided.

5. VLC Video Player

Even though you might be familiar with VLC as a video player, it has many features that help to make changes in the audio and video of a file.

The player has a built-in sound normalization feature that can be enabled when needed. Open the player and tap on Tools from the top toolbar and then on the Preferences option. Choose to show All settings from the bottom right and select Filters under the Audio from the left panel. Tick mark the Volume normalizer option and hit the Save button.

The volume level can also be adjusted from the Volume normalizer panel under the Filters option.

6. Final Cut Pro

Final cut pro x is a non-linear and nondestructive video application commonly used on Apple devices. This application offers improved rendering, playback, and transcoding.

To normalize audio on final cut pro x, open the application and tap on the Modify option, then on Audio, and finally on Apply Normalization Gain.

To normalize more than one audio clip make sure that the audio level of each clip is set to 0 dB. This can be done by tapping on Edit and then on Remove Attributes. So for better results, make sure that the audio level of each clip is set to 0dB before normalization.

7. Handbrake

Handbrake is an open-source video transcoder that can convert any video format to any desired codecs. It also has some video and audio editing features. The sound normalization feature in Handbrake allows the user to adjust the dynamic range of some of the audio formats.

To increase the audio gain on Handbrake, select Source on the app and make sure the video file and destination are correct. Then click on the Audio option and adjust the Gain.

8. Reaper

Reaper is an all-in-one audio production application that offers extensive audio editing features, including MIDI recording, editing, mixing, processing, etc. To bring the volume level to a higher level using an audio normalizer in Reaper, open the application and import the audio files.

Reaper offers keyboard shortcuts for applying different features and normalizing audio on PC. The shortcut is Control + Shift + N.

This app also allows manual normalization using a knob which can be done according to the user preference.

9. AIMP

AIMP is a freeware audio player used by many android and windows users to enjoy music. This player offers an audio normalization feature that can be applied to all the files by default.

To do so, go to DSP manager in AIMP and click on the Volume normalization tab. Mark the Normalize volume option and make changes to the settings.

You can adjust the target volume level, the upper threshold of the preamp, and the lower threshold of preamp in the settings. The app also allows making changes to the gain values.

10. Movavi

Movavi is a video editor with a very intuitive interface and a big collection of effects. Normalizing the audio using Movavi is very simple, and to do so, open the application and import the file first to the timeline.

Double click on the file on the timeline and click on Clip Properties. From the General tab, tick mark the Normalize box, and the whole audio track will be normalized.

What is the best audio normalizer for you?

An audio normalizer can be used for a variety of purposes. Some people use it to play songs without having to adjust the volume for each song manually, others use it for enhancing the volume of songs that has a very low volume, and some others use it for video editing purposes.

A list of applications with sound normalizers has been listed above, and you can choose any one of them depending on your purpose. Some of these apps, like Wondershare Filmora, Final Cut Pro X offers extensive audio editing features and audio normalization, which can be very helpful in video editing. If you wish to increase the volume of the files while playing, you can go with VLC, MP3Gain, etc. Hope our suggestion helps to provide you with a better audio experience.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Achieving Balanced Video Audios: Four Essential Techniques

How to Adjust Audio Volume in Videos [4 Ways]

Shanoon Cox

Mar 27, 2024• Proven solutions

Some of the greatest film directors of all time have used sound to make the scenes in their movies more dramatic, romantic or to build suspense. The importance of sound for the overall quality of a video is often overlooked by young filmmakers, as they tend to dedicate all of their attention to the visual part of their projects.

The fact of the matter is that even a minor error in the video’s soundtrack can distract the viewer and ruin a video completely. That’s why, in this article, we are going to show you four different methods of adjusting the audio volume in Filmora.

To increse the volume of your video, click here.

Four Ways of Adjusting Audio Volume in Filmora

The audio clips often have different volume levels, so in order to create a balanced soundtrack, you have to adjust the volume of each audio track you intend to use in your projects. Filmora offers several different ways to adjust the volume of audio files quickly and effortlessly. Here’s how you can increase or decrease the volume of the audio clips in Filmora.

Download Filmora and watch the video below to get a full knowledge abtou adjusting volume!

1. Changing the Audio Volume of Entire Track

This is probably the easiest and fastest way to adjust the volume of a video or an audio file in Filmora. After you import the file into a project you just have to add it to a certain position on the timeline. You can do this by simply dragging and dropping the file at the location on the timeline where you want the file to be placed. Click on the Add Track menu that is located in the upper left corner of the timeline and select the Big option from the Adjust Track Height submenu.

Enlarging the video and audio tracks will enable you to see the audio volume line that is displayed over all clips that contain sound you add to the timeline. Click on the line and drag it upwards if you would like to increase the volume or drag it downwards if you want to decrease the volume of an audio or a video file.

2. Applying the Fade In and Fade Out Effects to Change the Audio Volume Partially

Once you add an audio clip to an audio track on Filmora’s timeline, you can adjust its volume from the Audio Editing panel. Double-clicking on an audio file will bring up the Audio Editing panel that contains Fade In and Fade Out sliders. Both sliders are going to be set to zero by default, so you just have to drag each of them to the right in order to create the Fade In or Fade Out effect.

Filmora also lets you create the Fade In and Fade Out effect directly from the timeline, as you just have to hover the mouse over an audio file and drag the Fade In or Fade Out markers to set the duration of the effect for that particular file.

3. Using the Volume Slider to Change the Audio Volume

On the left side of the Audio Editing panel that can be accessed by double clicking on an audio file, you will be able to see the volume slider. Its value is going to be set to 0 dB by default and you just have to drag it upward or downward in order to adjust the audio volume. As you drag the slider the new audio volume value is going to be displayed in a box below the slider. The left/right balance value can be adjusted by dragging the knob that is located above the volume slider in either direction. Alternatively, you can insert a new numerical value in the box below the knob. If the displayed value is 0 dB, then the left and right channels are balanced, while the value of -100 dB means that all the sound goes through the left channel and if the displayed value is 100 dB all the sound will go through the right channel.

4. Adding Keyframes to Adjust the Audio Volume

Once you add an audio file to the timeline you can adjust its volume by adding keyframes to it. Place the playhead to the exact spot in the audio file where you want to add the first keyframe and then double click on the file to bring up the Audio Editing panel. Click on the Add Volume Keyframes icon and use the volume slider to adjust the volume at the position of the first keyframe.

Simply move the playhead and change the value on the volume slider to add new keyframes to the audio file. This method of adjusting audio volume enables you to set different volume values for different parts of an audio file.

Still not solved? Try this audio guide of Filmora to settle all the audio problems.

Conclusion

Having complete control over the volume of all audio files you use in your projects is important for so many different reasons. Filmora offers four easy ways to adjust the audio volume so you can focus on more important tasks. Which method of adjusting the audio volume in Filmora do you like to use the most? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Some of the greatest film directors of all time have used sound to make the scenes in their movies more dramatic, romantic or to build suspense. The importance of sound for the overall quality of a video is often overlooked by young filmmakers, as they tend to dedicate all of their attention to the visual part of their projects.

The fact of the matter is that even a minor error in the video’s soundtrack can distract the viewer and ruin a video completely. That’s why, in this article, we are going to show you four different methods of adjusting the audio volume in Filmora.

To increse the volume of your video, click here.

Four Ways of Adjusting Audio Volume in Filmora

The audio clips often have different volume levels, so in order to create a balanced soundtrack, you have to adjust the volume of each audio track you intend to use in your projects. Filmora offers several different ways to adjust the volume of audio files quickly and effortlessly. Here’s how you can increase or decrease the volume of the audio clips in Filmora.

Download Filmora and watch the video below to get a full knowledge abtou adjusting volume!

1. Changing the Audio Volume of Entire Track

This is probably the easiest and fastest way to adjust the volume of a video or an audio file in Filmora. After you import the file into a project you just have to add it to a certain position on the timeline. You can do this by simply dragging and dropping the file at the location on the timeline where you want the file to be placed. Click on the Add Track menu that is located in the upper left corner of the timeline and select the Big option from the Adjust Track Height submenu.

Enlarging the video and audio tracks will enable you to see the audio volume line that is displayed over all clips that contain sound you add to the timeline. Click on the line and drag it upwards if you would like to increase the volume or drag it downwards if you want to decrease the volume of an audio or a video file.

2. Applying the Fade In and Fade Out Effects to Change the Audio Volume Partially

Once you add an audio clip to an audio track on Filmora’s timeline, you can adjust its volume from the Audio Editing panel. Double-clicking on an audio file will bring up the Audio Editing panel that contains Fade In and Fade Out sliders. Both sliders are going to be set to zero by default, so you just have to drag each of them to the right in order to create the Fade In or Fade Out effect.

Filmora also lets you create the Fade In and Fade Out effect directly from the timeline, as you just have to hover the mouse over an audio file and drag the Fade In or Fade Out markers to set the duration of the effect for that particular file.

3. Using the Volume Slider to Change the Audio Volume

On the left side of the Audio Editing panel that can be accessed by double clicking on an audio file, you will be able to see the volume slider. Its value is going to be set to 0 dB by default and you just have to drag it upward or downward in order to adjust the audio volume. As you drag the slider the new audio volume value is going to be displayed in a box below the slider. The left/right balance value can be adjusted by dragging the knob that is located above the volume slider in either direction. Alternatively, you can insert a new numerical value in the box below the knob. If the displayed value is 0 dB, then the left and right channels are balanced, while the value of -100 dB means that all the sound goes through the left channel and if the displayed value is 100 dB all the sound will go through the right channel.

4. Adding Keyframes to Adjust the Audio Volume

Once you add an audio file to the timeline you can adjust its volume by adding keyframes to it. Place the playhead to the exact spot in the audio file where you want to add the first keyframe and then double click on the file to bring up the Audio Editing panel. Click on the Add Volume Keyframes icon and use the volume slider to adjust the volume at the position of the first keyframe.

Simply move the playhead and change the value on the volume slider to add new keyframes to the audio file. This method of adjusting audio volume enables you to set different volume values for different parts of an audio file.

Still not solved? Try this audio guide of Filmora to settle all the audio problems.

Conclusion

Having complete control over the volume of all audio files you use in your projects is important for so many different reasons. Filmora offers four easy ways to adjust the audio volume so you can focus on more important tasks. Which method of adjusting the audio volume in Filmora do you like to use the most? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Some of the greatest film directors of all time have used sound to make the scenes in their movies more dramatic, romantic or to build suspense. The importance of sound for the overall quality of a video is often overlooked by young filmmakers, as they tend to dedicate all of their attention to the visual part of their projects.

The fact of the matter is that even a minor error in the video’s soundtrack can distract the viewer and ruin a video completely. That’s why, in this article, we are going to show you four different methods of adjusting the audio volume in Filmora.

To increse the volume of your video, click here.

Four Ways of Adjusting Audio Volume in Filmora

The audio clips often have different volume levels, so in order to create a balanced soundtrack, you have to adjust the volume of each audio track you intend to use in your projects. Filmora offers several different ways to adjust the volume of audio files quickly and effortlessly. Here’s how you can increase or decrease the volume of the audio clips in Filmora.

Download Filmora and watch the video below to get a full knowledge abtou adjusting volume!

1. Changing the Audio Volume of Entire Track

This is probably the easiest and fastest way to adjust the volume of a video or an audio file in Filmora. After you import the file into a project you just have to add it to a certain position on the timeline. You can do this by simply dragging and dropping the file at the location on the timeline where you want the file to be placed. Click on the Add Track menu that is located in the upper left corner of the timeline and select the Big option from the Adjust Track Height submenu.

Enlarging the video and audio tracks will enable you to see the audio volume line that is displayed over all clips that contain sound you add to the timeline. Click on the line and drag it upwards if you would like to increase the volume or drag it downwards if you want to decrease the volume of an audio or a video file.

2. Applying the Fade In and Fade Out Effects to Change the Audio Volume Partially

Once you add an audio clip to an audio track on Filmora’s timeline, you can adjust its volume from the Audio Editing panel. Double-clicking on an audio file will bring up the Audio Editing panel that contains Fade In and Fade Out sliders. Both sliders are going to be set to zero by default, so you just have to drag each of them to the right in order to create the Fade In or Fade Out effect.

Filmora also lets you create the Fade In and Fade Out effect directly from the timeline, as you just have to hover the mouse over an audio file and drag the Fade In or Fade Out markers to set the duration of the effect for that particular file.

3. Using the Volume Slider to Change the Audio Volume

On the left side of the Audio Editing panel that can be accessed by double clicking on an audio file, you will be able to see the volume slider. Its value is going to be set to 0 dB by default and you just have to drag it upward or downward in order to adjust the audio volume. As you drag the slider the new audio volume value is going to be displayed in a box below the slider. The left/right balance value can be adjusted by dragging the knob that is located above the volume slider in either direction. Alternatively, you can insert a new numerical value in the box below the knob. If the displayed value is 0 dB, then the left and right channels are balanced, while the value of -100 dB means that all the sound goes through the left channel and if the displayed value is 100 dB all the sound will go through the right channel.

4. Adding Keyframes to Adjust the Audio Volume

Once you add an audio file to the timeline you can adjust its volume by adding keyframes to it. Place the playhead to the exact spot in the audio file where you want to add the first keyframe and then double click on the file to bring up the Audio Editing panel. Click on the Add Volume Keyframes icon and use the volume slider to adjust the volume at the position of the first keyframe.

Simply move the playhead and change the value on the volume slider to add new keyframes to the audio file. This method of adjusting audio volume enables you to set different volume values for different parts of an audio file.

Still not solved? Try this audio guide of Filmora to settle all the audio problems.

Conclusion

Having complete control over the volume of all audio files you use in your projects is important for so many different reasons. Filmora offers four easy ways to adjust the audio volume so you can focus on more important tasks. Which method of adjusting the audio volume in Filmora do you like to use the most? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Some of the greatest film directors of all time have used sound to make the scenes in their movies more dramatic, romantic or to build suspense. The importance of sound for the overall quality of a video is often overlooked by young filmmakers, as they tend to dedicate all of their attention to the visual part of their projects.

The fact of the matter is that even a minor error in the video’s soundtrack can distract the viewer and ruin a video completely. That’s why, in this article, we are going to show you four different methods of adjusting the audio volume in Filmora.

To increse the volume of your video, click here.

Four Ways of Adjusting Audio Volume in Filmora

The audio clips often have different volume levels, so in order to create a balanced soundtrack, you have to adjust the volume of each audio track you intend to use in your projects. Filmora offers several different ways to adjust the volume of audio files quickly and effortlessly. Here’s how you can increase or decrease the volume of the audio clips in Filmora.

Download Filmora and watch the video below to get a full knowledge abtou adjusting volume!

1. Changing the Audio Volume of Entire Track

This is probably the easiest and fastest way to adjust the volume of a video or an audio file in Filmora. After you import the file into a project you just have to add it to a certain position on the timeline. You can do this by simply dragging and dropping the file at the location on the timeline where you want the file to be placed. Click on the Add Track menu that is located in the upper left corner of the timeline and select the Big option from the Adjust Track Height submenu.

Enlarging the video and audio tracks will enable you to see the audio volume line that is displayed over all clips that contain sound you add to the timeline. Click on the line and drag it upwards if you would like to increase the volume or drag it downwards if you want to decrease the volume of an audio or a video file.

2. Applying the Fade In and Fade Out Effects to Change the Audio Volume Partially

Once you add an audio clip to an audio track on Filmora’s timeline, you can adjust its volume from the Audio Editing panel. Double-clicking on an audio file will bring up the Audio Editing panel that contains Fade In and Fade Out sliders. Both sliders are going to be set to zero by default, so you just have to drag each of them to the right in order to create the Fade In or Fade Out effect.

Filmora also lets you create the Fade In and Fade Out effect directly from the timeline, as you just have to hover the mouse over an audio file and drag the Fade In or Fade Out markers to set the duration of the effect for that particular file.

3. Using the Volume Slider to Change the Audio Volume

On the left side of the Audio Editing panel that can be accessed by double clicking on an audio file, you will be able to see the volume slider. Its value is going to be set to 0 dB by default and you just have to drag it upward or downward in order to adjust the audio volume. As you drag the slider the new audio volume value is going to be displayed in a box below the slider. The left/right balance value can be adjusted by dragging the knob that is located above the volume slider in either direction. Alternatively, you can insert a new numerical value in the box below the knob. If the displayed value is 0 dB, then the left and right channels are balanced, while the value of -100 dB means that all the sound goes through the left channel and if the displayed value is 100 dB all the sound will go through the right channel.

4. Adding Keyframes to Adjust the Audio Volume

Once you add an audio file to the timeline you can adjust its volume by adding keyframes to it. Place the playhead to the exact spot in the audio file where you want to add the first keyframe and then double click on the file to bring up the Audio Editing panel. Click on the Add Volume Keyframes icon and use the volume slider to adjust the volume at the position of the first keyframe.

Simply move the playhead and change the value on the volume slider to add new keyframes to the audio file. This method of adjusting audio volume enables you to set different volume values for different parts of an audio file.

Still not solved? Try this audio guide of Filmora to settle all the audio problems.

Conclusion

Having complete control over the volume of all audio files you use in your projects is important for so many different reasons. Filmora offers four easy ways to adjust the audio volume so you can focus on more important tasks. Which method of adjusting the audio volume in Filmora do you like to use the most? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

“Mastering Audio Normalization with DaVinci Resolve: An In-Depth Tutorial”

How To Normalize Audio In DaVinci Resolve

It happens a lot of times that we are not satisfied with several details our videos and audios contain, and we need to edit them. One of the most common problems we face is that our volumes are not normalized, and we need to take some extra time in order to achieve the best result for our audiences. Even with little or no knowledge about this very specific topic, we need to inform ourselves and find the solutions, make our videos more watch-able and our audios more listen-able, so to say.

There are several ways the audio normalization is achieved. One type is called peak normalization, helping adjust the recording based on the highest signal level present in the recording; the second is loudness normalization, adjusting the recording based on perceived loudness. RMS (Root-Mean-Square) changes the value of all the samples, where their average electrical volume overall is a specified level.

Mostly, there are two reasons why we should give audio normalization a try. You need to decide yourself, what is your reason and expected outcome when you use audio normalization. First is when your aim is to get the maximum volume, but the second boils down to matching different volumes with each other.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

More concretely, in general, audio normalization is when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, “the norm” for the project. It means that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

You can have the desired result using different kinds of software. Nowadays, a lot of programs offer you the tool which facilitates this process. So, one of them would be DaVinci Resolve, which we are going to discuss in this article.

What is DaVinci Resolve? The description goes: “DaVinci Resolve is the world’s only solution that combines editing, color correction, visual effects, motion graphics and audio post production all in one software tool!” so, let’s discover what this software can do to help us balance the audio!

So, how to balance your audio in DaVinci Resolve? We are going to discuss everything step by step – how to set your target loudness level, how to monitor the loudness, and how you can use the automation feature.

Well, of course, have the program installed and opened. Then, add your video with the audio you want to edit or the audio separately, if that’s what you are aiming to do.

The first step you need to make is to set your target loudness level – for this, find the little settings button on the right bottom of the program and click on it. Now, go down to the Fairlight menu and change the Target Loudness Level. If you are doing the audio normalization for the Youtube content, then it is recommended to set it to -14 LUFS.

Next, you are going to head to the Fairlight page and make sure that your meters are open. the loudness meter is on the right top of the layout of the program, and it goes from +9 to -15 LUFS.

Here, zero represents exactly what our target loudness level is, in this case, as you remember, we set it to -14 LUFS. So, ensure that our loudness is as close as zero as possible on the meter, but you can also make it lower, such as -3. Whenever you play, you will be able to see that there are some numbers popping up to the right of the meter.

The first one, you’ll find, is Short – constantly changing, indicating how far above or below the target loudness level you are at a given time. Short Max tells you how far above or below your target loudness level the loudest point of your video is. Range is a measure of your quietest pick to your loudest peak, and the last one is Integrated – it gives you the overall loudness of your video in relation to your target loudness level. Integrated is the number we aim to keep around -3 or 0.

We can use our main slider (next to the sequence on the right) to make our video louder or quieter until we hit that target loudness level.

Also, there is an automation tool that can help you dial in your loudness. In order to access this feature, find a red icon, looking like a wave with kind of a key frames.

Next, open up your Index (on the far top panel, a little bit from the left), and make sure you are in the tracks menu in your editing index.

What you want to do is to make your main track visible on the timeline, so hit on the eyeball next to your main and go to your timeline, where you will expand your main track until you see your Loudness History options.

Here, you will need to check in the box next to Integrated and turn on the Loudness History. This will show the integrated loudness level, adjust your main track’s volume accordingly, so you are below the zero line. And, that’s actually it!

How to normalize audio in Wondershare Filmora X?

Even though doing this with the help of DaVinci Resolve is really helpful, and, let’s say, sophisticated, you might find it a little complicated, in case you were not so familiar with video/audio editing. So, we would like you to have some information about what alternative you can turn to, and in this case, it’s worth bringing up a software - Wondershare Filmora X . With it, you will find that the same task can be carried out wonderfully. It is also a video editor, but it is one of the easiest to use in the word, supported by Mac and Windows. Filmora offers a great, neat, user-friendly interface, and helps you understand the very basics of editing. Actually, it has not been long since Wondershare Filmora X introduced the feature to normalize the audio. So, you might want download the latest version of Filmora X and start following along the steps we are going to provide for you to understand how audio normalization works on Filmora X .

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!

So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!

Free Download For macOS 10.14 or later

After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!

So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!

Also read: