Mastering Seamless Scene Shifts in Video Editing

How to Add Video and Audio Transition Between Scenes/Clips

Liza Brown

Mar 27, 2024• Proven solutions

Transition effects appear when one slide/clip replaces another one. It helps make the presentation, slideshow or movie good looking and impressive. Transition effects are widely used in and video editing software, such as Windows Movie Maker, iMovie, DVD Slideshow Builder, etc. You can also use transition sound effects to make amazing videos.

This article will show you how to add transitions (including video and audio transitions) between scenes and clips in Wondershare Filmora . Tips and tricks for transitions are also included.

How to Add Transitions Between clips

Part 1: Add video transitions between clips
Part 2: Add audio transitions between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

Wondershare Filmora is an easy-to-use while powerful video editing tool that is available both on Windows and Mac. Download it from the button below to get started.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

2. Import video/photos to the project

Before adding video/photo files to the Timeline, you need to import them first into the project. There are mainly 2 ways to import video/photo files: “Import” button on primary windows, or dragging and dropping files from Windows File Explorer to the User’s Album. Wondershare Filmora supports all popular video/audio/photo formats, including but not limited to AVI, MP4, MOV, MPEG, MPG, FLV, M4V, WMV, TS, MOD, TOD, VOB, MP3, WMA, M4A, JPG, PNG, BMP, and GIF. Then drag and drop the media files from the Media album to the video track on timline for editing

3. Add transitions between video and photo files

All clips will be played one by one without a gap. But no transition effects will be applied by default. To add transitions, switch to Transition tab and drag any transition to the joint of two clips from almost 200 transitions (when the white box appears, release your mouse). Now, you could also add transition at the end or start of a clip.

You can also change the transition mode among Overlap, Prefix, and Postfix by double-clicking on the transition on timeline

Tips and Tricks for Transition Effects

1. If you want to set the transition duration, it’s better to enlarge the Timeline view through the Zoom in tool or slider above the Timeline. Next, double click the transition thumbnail to open the setting panel and input the time. Click “Apply to All” if you want all transition effects to have the same duration.

2. To delete a transition, highlight it and click the Delete button in the toolbar above Timeline, or press Delete key on the keyboard.

3. If you especially love a transition, you can add it to Favorite by right clicking transition in the list and selecting “Add to Favorites” from the menu.

4Export video with transitions

When you are happy with your video and transition effects, click “Create” to save the video with transitions. You can save video in all popular formats on the computer by clicking “Format” and choosing a format from the list. If you want to play your video on iPod, iPhone, iPad, click “Device” and select a thumbnail of the device. It’s also available to upload your videos to YouTube to share with your friends. To play video on TV, you can burn it to DVD with your DVD burner.

In the end, if you have problems with adding transitions, please click here to get in touch with supporters.

Part 3: Add audio transitions

Filmora also allows you to add transitions between audio files. Using the fade-in and fade-out feature to make your audio process smoontly. With the complete new waveform and audio keyframing. Check this video to see the details about video transition in Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

This article will show you how to add transitions (including video and audio transitions) between scenes and clips in Wondershare Filmora . Tips and tricks for transitions are also included.

How to Add Transitions Between clips

Part 1: Add video transitions between clips
Part 2: Add audio transitions between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

Wondershare Filmora is an easy-to-use while powerful video editing tool that is available both on Windows and Mac. Download it from the button below to get started.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

2. Import video/photos to the project

3. Add transitions between video and photo files

You can also change the transition mode among Overlap, Prefix, and Postfix by double-clicking on the transition on timeline

Tips and Tricks for Transition Effects

2. To delete a transition, highlight it and click the Delete button in the toolbar above Timeline, or press Delete key on the keyboard.

3. If you especially love a transition, you can add it to Favorite by right clicking transition in the list and selecting “Add to Favorites” from the menu.

4Export video with transitions

In the end, if you have problems with adding transitions, please click here to get in touch with supporters.

Part 3: Add audio transitions

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

This article will show you how to add transitions (including video and audio transitions) between scenes and clips in Wondershare Filmora . Tips and tricks for transitions are also included.

How to Add Transitions Between clips

Part 1: Add video transitions between clips
Part 2: Add audio transitions between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

Wondershare Filmora is an easy-to-use while powerful video editing tool that is available both on Windows and Mac. Download it from the button below to get started.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

2. Import video/photos to the project

3. Add transitions between video and photo files

You can also change the transition mode among Overlap, Prefix, and Postfix by double-clicking on the transition on timeline

Tips and Tricks for Transition Effects

2. To delete a transition, highlight it and click the Delete button in the toolbar above Timeline, or press Delete key on the keyboard.

3. If you especially love a transition, you can add it to Favorite by right clicking transition in the list and selecting “Add to Favorites” from the menu.

4Export video with transitions

In the end, if you have problems with adding transitions, please click here to get in touch with supporters.

Part 3: Add audio transitions

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

This article will show you how to add transitions (including video and audio transitions) between scenes and clips in Wondershare Filmora . Tips and tricks for transitions are also included.

How to Add Transitions Between clips

Part 1: Add video transitions between clips
Part 2: Add audio transitions between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

Wondershare Filmora is an easy-to-use while powerful video editing tool that is available both on Windows and Mac. Download it from the button below to get started.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

2. Import video/photos to the project

3. Add transitions between video and photo files

You can also change the transition mode among Overlap, Prefix, and Postfix by double-clicking on the transition on timeline

Tips and Tricks for Transition Effects

2. To delete a transition, highlight it and click the Delete button in the toolbar above Timeline, or press Delete key on the keyboard.

3. If you especially love a transition, you can add it to Favorite by right clicking transition in the list and selecting “Add to Favorites” from the menu.

4Export video with transitions

In the end, if you have problems with adding transitions, please click here to get in touch with supporters.

Part 3: Add audio transitions

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Mastering Clear Sound: Techniques for Eliminating Audio Distortion in Videos

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

The first step is opening the file. To do this, drag and drop the audio file into Audacity.
Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

Doing this will open the Noise reduction window.
Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
Check the audio by clicking Preview. If you are satisfied with the results, click OK.
Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

Double click on the track to access the Waveform.
Go to Window, and then select the Amplitude Statistics option.
A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

Check the section written Possibly Clipped Samples.

Head over to Effects>Diagnostics> DeClipper.

In the Preset section, select the Restore Heavily Clipped option.

Next, hit the Settings button, and adjust the Tolerance.

Hit the Scan button again, and you’ll see all the problems in your audio.
Click Repair all to fix your distorted audio.

Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

Upload your footage to VSDC and right-click on it.
Select the Audio effects option, then choose Filters. Click on Gate.

You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
Make-up gain: This increases the signal level after it has been processed.
Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
Reduction: This parameter defines the level of signal reduction will be.
Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

The Difference Between Noise and Distortion

1. Where It Appears in a Signal

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

The first step is opening the file. To do this, drag and drop the audio file into Audacity.
Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

Doing this will open the Noise reduction window.
Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
Check the audio by clicking Preview. If you are satisfied with the results, click OK.
Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

These steps below will allow you to remove distortion from audio with Adobe Audition.

Double click on the track to access the Waveform.
Go to Window, and then select the Amplitude Statistics option.
A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

Check the section written Possibly Clipped Samples.

Head over to Effects>Diagnostics> DeClipper.

In the Preset section, select the Restore Heavily Clipped option.

Next, hit the Settings button, and adjust the Tolerance.

Hit the Scan button again, and you’ll see all the problems in your audio.
Click Repair all to fix your distorted audio.

Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

Upload your footage to VSDC and right-click on it.
Select the Audio effects option, then choose Filters. Click on Gate.

You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
Make-up gain: This increases the signal level after it has been processed.
Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
Reduction: This parameter defines the level of signal reduction will be.
Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

Step 2. Adjust the Levels

Step 3. Export Your File

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

Try It Free Try It Free

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

The Difference Between Noise and Distortion

1. Where It Appears in a Signal

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

The first step is opening the file. To do this, drag and drop the audio file into Audacity.
Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

Doing this will open the Noise reduction window.
Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
Check the audio by clicking Preview. If you are satisfied with the results, click OK.
Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

These steps below will allow you to remove distortion from audio with Adobe Audition.

Double click on the track to access the Waveform.
Go to Window, and then select the Amplitude Statistics option.
A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

Check the section written Possibly Clipped Samples.

Head over to Effects>Diagnostics> DeClipper.

In the Preset section, select the Restore Heavily Clipped option.

Next, hit the Settings button, and adjust the Tolerance.

Hit the Scan button again, and you’ll see all the problems in your audio.
Click Repair all to fix your distorted audio.

Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

Upload your footage to VSDC and right-click on it.
Select the Audio effects option, then choose Filters. Click on Gate.

You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
Make-up gain: This increases the signal level after it has been processed.
Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
Reduction: This parameter defines the level of signal reduction will be.
Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

Step 2. Adjust the Levels

Step 3. Export Your File

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

Try It Free Try It Free

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

The Difference Between Noise and Distortion

1. Where It Appears in a Signal

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

The first step is opening the file. To do this, drag and drop the audio file into Audacity.
Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

Doing this will open the Noise reduction window.
Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
Check the audio by clicking Preview. If you are satisfied with the results, click OK.
Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

These steps below will allow you to remove distortion from audio with Adobe Audition.

Double click on the track to access the Waveform.
Go to Window, and then select the Amplitude Statistics option.
A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

Check the section written Possibly Clipped Samples.

Head over to Effects>Diagnostics> DeClipper.

In the Preset section, select the Restore Heavily Clipped option.

Next, hit the Settings button, and adjust the Tolerance.

Hit the Scan button again, and you’ll see all the problems in your audio.
Click Repair all to fix your distorted audio.

Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

Upload your footage to VSDC and right-click on it.
Select the Audio effects option, then choose Filters. Click on Gate.

You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
Make-up gain: This increases the signal level after it has been processed.
Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
Reduction: This parameter defines the level of signal reduction will be.
Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

Step 2. Adjust the Levels

Step 3. Export Your File

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

Amp Up Your Practice with FREE Guitar Visuals & Melodies Archive

Guitar music is very soothing. It is considered peaceful music. Whenever you are feeling low, you can lighten your mood by listening or playing guitar. Learning how to play the guitar is not that tough. Especially today because many YouTubers teach you how to play guitar. If you love guitar music, but you don’t want to play it yourself, then what else could be done?

Any person who likes guitar music can use it as background music. You can add guitar background music to any of your content or video. The fact this music is subtle and light, everyone enjoys it. If you plan to add guitar background images or acoustic guitar background music to your content, then let us help you. Stay here with us and learn more about it.

Part 1. Trendy Sites to Free Download Guitar Background Pictures

Only a guitar fan will know how fascinating it is to have guitar images. Guitar lovers usually have guitar backgrounds on their phones, laptops, etc. The only thing that bothers is where to get free guitar background images?

Are you interested in knowing about sites to download guitar images? If yes, then let’s get started. We are going to share trendy sites to download free guitar background images.

1. Unsplash

The first site that we are going to talk about is Unsplash. You can easily download free images from this platform. You have to hit the arrow button to download your desired image. When you search for ‘Guitar Images,’ it offers you a variety of results. You might even get confused when it comes to downloading because of the wide range of impressive results.

When you see any image on Unsplash, it offers some options with it. For instance, you can zoom in on any image that you like. If you move the cursor over the guitar image, then you will see an option to ‘Like’ it. You will also see an option as ‘Add to Collection.’ With this, you can add your favorite images to your collection. Not just that, Unsplash also shares complete information about the photographer.

2. Pexels

The next fun site to download free guitar images is Pexels. The platform is famous for the variety of images it offers. With Pexels, you can narrow down the wide search results. For that, you can specify certain elements like the orientation, the image size, etc.

Imagine you look at a picture and think that it’s a masterpiece. You might be interested in knowing about the person behind the lens. Well, with Pexels, you can get to know about the photographers. You can also create your little world of collections.

For that, you have to hit the ‘Collect’ button in the top right corner of the image. With this, the selected image will be added to your collections. You can also like aesthetic and cool images but hitting the ‘Heart’ button.

3. WallpaperAccess

The next site that deserves recognition is Wallpaper Access. You can download free guitar background images from WallpaperAccess. The site has a great collection of HD background images. Other than cool Guitar images, you can find a variety of images. You can select and search for your desired category from the Categories dropdown menu.

Is downloading everything that WallpaperAccess offers? Certainly not. With WallpaperAccess, you can not only download free images but also share them. Share your favorite guitar backgrounds to Facebook, Twitter, and Pinterest directly from the site. Another great thing about WallpaperAccess is that it displays the image resolution.

4. Wallpaper Flare

Wallpaper Flare is the ultimate hub for high-quality images. You can get 1080P, HD, 2K, 4K, and even 5K guitar background images. Importantly, you don’t have to pay a penny to get these stunning quality images. Yes, you got us right. Wallpaper Flare offers a free download of unique backgrounds.

You can view the image details by clicking on them. Wallpaper Flare shares the dimensions and also the file size of the respective background image. Upon clicking on any image, you can get the related tags. With Wallpaper Flare you can quickly expand the radius of your search. Not just this, but before downloading your favorite wallpaper, the site also shares its resolution.

Part 2. Popular Sites to Free Download Guitar Background Music

Guitar music is very mellow and relaxing. People enjoy acoustic guitar background music. The fact that the guitar is not as loud as other instruments that’s why it suits well as background music. This type of music is usually used in many videos.

The problem arises when you don’t get good guitar background music. What could be done in such a situation? Well, here is what you need. We are about to share popular sites. You can download free music from these sites. This will help you in resolving your problem.

1. Pixabay

The first site to download free guitar background music is Pixabay. You can find a variety of background music here. You have to enter your desired music type in the search bar and get awesome results. Initially, the site displays the name of the music, its duration, and a ‘Download’ button. You hit the button to get the music downloaded for free.

You know there is a slight twist in what you can see on the site. Pixabay has shared detailed information on every piece of music, but it’s hidden. To view the details, click on the arrow button in front of every background music. This will display the related tags, comments, and likes on the music. You can also look at the total number of plays and total downloads.

2. Mixkit

The other site to download free music like guitar background is Mixkit. With Mixkit, you can do unlimited downloads. Get your favorite audio tracks for free and use them in your videos. With every audio track, Mixkit shares its duration, the different related tags, and also a button to download your favorite music.

3. Chosic

Chosic offers you a variety of results that can be downloaded for free. Most music available on Chosic has Creative Commons License or Public Domain. If you are a guitar lover, then you can get the best royalty-free MP3 guitar background music from this platform.

There is a wide range of guitar music. You can either get romantic guitar music, electric guitar music, or others. Along with every music track, its duration has been displayed. Related tags are also added underneath. You can hit the green ‘Download’ button to get your favorite music downloaded.

4. Freesound

Freesound is the last site that we are going to discuss. The name of the site indicates what it is for. You can download free guitar music tracks from this platform. The site displays complete detail about any guitar background music.

In front of every music track, you will see some details shared. These details include the date and year of release. It tells you the exact number of downloads any background music already has. Along with that, you can also view the comments, file size, etc. In addition to that, you can also view the results of similar sounds.

Final Words

Let us conclude the article with the assumption that this article was helpful to you. Guitar background was the main target of this article. We used two approaches to talk about it. The first thing that we discussed was sites to download free guitar background images—followed by popular sites that allow the free downloading of guitar background music.

Part 1. Trendy Sites to Free Download Guitar Background Pictures

Are you interested in knowing about sites to download guitar images? If yes, then let’s get started. We are going to share trendy sites to download free guitar background images.

1. Unsplash

2. Pexels

3. WallpaperAccess

4. Wallpaper Flare

Part 2. Popular Sites to Free Download Guitar Background Music

1. Pixabay

2. Mixkit

3. Chosic

4. Freesound

Final Words

Part 1. Trendy Sites to Free Download Guitar Background Pictures

Are you interested in knowing about sites to download guitar images? If yes, then let’s get started. We are going to share trendy sites to download free guitar background images.

1. Unsplash

2. Pexels

3. WallpaperAccess

4. Wallpaper Flare

Part 2. Popular Sites to Free Download Guitar Background Music

1. Pixabay

2. Mixkit

3. Chosic

4. Freesound

Final Words

Part 1. Trendy Sites to Free Download Guitar Background Pictures

Are you interested in knowing about sites to download guitar images? If yes, then let’s get started. We are going to share trendy sites to download free guitar background images.

Voice Adjusting

New In 2024, Mastering Seamless Scene Shifts in Video Editing

Mastering Seamless Scene Shifts in Video Editing

How to Add Video and Audio Transition Between Scenes/Clips

Liza Brown

How to Add Transitions Between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

2. Import video/photos to the project

3. Add transitions between video and photo files

Tips and Tricks for Transition Effects

4Export video with transitions

Part 3: Add audio transitions

Liza Brown

How to Add Transitions Between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

2. Import video/photos to the project

3. Add transitions between video and photo files

Tips and Tricks for Transition Effects

4Export video with transitions

Part 3: Add audio transitions

Liza Brown

How to Add Transitions Between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

2. Import video/photos to the project

3. Add transitions between video and photo files

Tips and Tricks for Transition Effects

4Export video with transitions

Part 3: Add audio transitions

Liza Brown

How to Add Transitions Between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

2. Import video/photos to the project

3. Add transitions between video and photo files

Tips and Tricks for Transition Effects

4Export video with transitions

Part 3: Add audio transitions

Mastering Clear Sound: Techniques for Eliminating Audio Distortion in Videos

Create High-Quality Video - Wondershare Filmora

In this article

What Is Distortion in Audio?

The Difference Between Noise and Distortion

1. Where It Appears in a Signal

2. How It Affects Signals

How It’s Measured

How to Remove Distortion From Audio for Your Video

Method 1: Use an Online Audio Distortion Tool

Method 2: Software Solutions - Adobe Audition

Method 3: Video Editing Tools like VSDC

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Step 1. Open Filmora and Import your file

Step 2. Adjust the Levels

Step 3. Export Your File

Conclusion

In this article

What Is Distortion in Audio?

The Difference Between Noise and Distortion

1. Where It Appears in a Signal

2. How It Affects Signals

How It’s Measured

How to Remove Distortion From Audio for Your Video

Method 1: Use an Online Audio Distortion Tool

Method 2: Software Solutions - Adobe Audition

Method 3: Video Editing Tools like VSDC

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Step 1. Open Filmora and Import your file

Step 2. Adjust the Levels

Step 3. Export Your File

Conclusion

In this article

What Is Distortion in Audio?

The Difference Between Noise and Distortion

1. Where It Appears in a Signal

2. How It Affects Signals

How It’s Measured

How to Remove Distortion From Audio for Your Video

Method 1: Use an Online Audio Distortion Tool