Tips for Synchronizing Volumes Across Tracks Using the VLC Media Player

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

“The Ultimate Guide to AMR Format Processing and Conversion “

AMR Audio Converter: Convert AMR Files Easily

Shanoon Cox

Mar 27, 2024• Proven solutions

AMR is an abbreviation for Adaptive Multi-Rate Audio Codec. It is a technology that utilizes audio compression formats primarily for speech. A typical AMR speech codec will have a multi-rate of eight bitrate values that range from 4.75kb/s to 12.2 kb/s. The structure of AMR allows the creation of a group of 160 twenty millisecond long samples by the codec in one frame. The multi-rate codec available for normal AMR files include ACELP, DTX, CAD and CNG.

In addition to compressing speech, the AMR file format can also be used for the storage of spoken audio using the same codec. There are a number of modern telephones that has the capability to store short audio recordings using the AMR format. There are also other programs, both free and proprietary that can be used to convert files from this format to other various formats and vice versa. However, since AMR file format was initially designed for storing speech or audio recordings, quality is likely to be compromised if other media files are converted into AMR.

How to Open AMR files on PC/Smartphone/Tablet

Though AMR file format was not designed for music and videos, there are certain instances when you might come across them and be confused on how to open them. The fact is that it is still possible to open AMR files with your personal computer, tablet, Smartphone or other devices.

In the case of a PC, the easiest way to open such a file is to simply double-click on it then allow the PC to decide which the most appropriate program to open it is.

If the already installed programs in your computer are unable to open the file, then the other alternative would be to search and download an appropriate AMR player. There are several sources from the internet that you can get such media player for absolutely free. If you prefer this route however, you need to be cautious and ensure that you don’t download a program file that will hurt your computer. Ensure that you download the program from a trusted website. This is the only to avoid downloading viruses, spyware, malware and other malicious programs that might compromise the safety and security of your computer.

Convert the AMR audio file to another Audio format

If you want to save yourself from risking your computer by installing other AMR players, you can simply convert the AMR audio file to other friendly formats whose player you already have. This conversion process is not complicated in any way. There are basically two options for achieving this and they include the following-:

1. Convert AMR file online

The first option is to use various websites that offer such conversion services. There are so many of them offering the services for free and all you have to do is to simply choose the ones that suits you the most. The process will in most cases involve three simple steps: upload the AMR file, choose the format you want it converted to then download the converted file. Some sites will require you to give your email address so that they send to you the converted file to your inbox. It is up to you to choose to whether or not to give your email address.

Download AMR Converter software from http://www.mystikmedia.com/amr%5Fconverter.htm

But the best alternative would be to download the AMR converter from http://www.mystikmedia.com/amr%5Fconverter.htm and install it in your computer so that you can use it whenever you want. This trusted software has been specifically designed for the purposes of converting AMR files to other file formats. It can convert any AMR file or its variation to more than thirty different formats including FLV, MP3, MP4, WMA, WAV, AVI etc.

The software is fairly intuitive with lots of features to enable you have a very good experience with it. It converts faster and can allow you to batch convert. Though it is not available for free, it’s well worth its cost with all the features and flexibility it will give you in converting your AMR files.

2. Desktop AMR to MP3 Converters

There are other converters – both online services and desktop based software programs that you can use to get similar results if you don’t want to use the paid one above. They include but not limited to the following-:

Free AMR to MP3 Converter

Free AMR to MP3 Converter – this is a desktop software program that has been designed to convert AMR files to MP3. It has a simple and intuitive interface and it allows for the conversion of single as well as group conversion of files. Other than slowing down some computers, the converter doesn’t seem to have any other drawbacks.

Wondershare Filmora – this is a full featured video and audio converter. Other than allowing you to convert AMR files to any desired format, it also enables you to edit the file. Converting files with it is as easy as dragging and dropping files from one format to the other. The fact that it is available for both windows and Mac makes it accessible to very many users.

Apowersoft Free Online Audio Converter

Apowersoft Free Online Audio Converter – Apowersoft Free Online Converter is a web based service that lets you convert AMR files to MP3 as well as other formats like WMA, WMV, FLAC, OGG, and RA. It offers an intuitive user interface with a fast conversion process since it does not upload the AMR files to the servers before converting them.

Freestar Free AMR MP3 Converter

Freestar Free AMR MP3 Converter – this is another online service that lets you convert the poor quality AMR files to high quality MP3 files. As opposed to most of the online converters, this particular one allows you to convert multiple files at a time. It also comes with a number of features including certain advanced options to give you the ultimate power to control the whole conversion process so that you get the desired quality.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

AMR is an abbreviation for Adaptive Multi-Rate Audio Codec. It is a technology that utilizes audio compression formats primarily for speech. A typical AMR speech codec will have a multi-rate of eight bitrate values that range from 4.75kb/s to 12.2 kb/s. The structure of AMR allows the creation of a group of 160 twenty millisecond long samples by the codec in one frame. The multi-rate codec available for normal AMR files include ACELP, DTX, CAD and CNG.

In addition to compressing speech, the AMR file format can also be used for the storage of spoken audio using the same codec. There are a number of modern telephones that has the capability to store short audio recordings using the AMR format. There are also other programs, both free and proprietary that can be used to convert files from this format to other various formats and vice versa. However, since AMR file format was initially designed for storing speech or audio recordings, quality is likely to be compromised if other media files are converted into AMR.

How to Open AMR files on PC/Smartphone/Tablet

Though AMR file format was not designed for music and videos, there are certain instances when you might come across them and be confused on how to open them. The fact is that it is still possible to open AMR files with your personal computer, tablet, Smartphone or other devices.

In the case of a PC, the easiest way to open such a file is to simply double-click on it then allow the PC to decide which the most appropriate program to open it is.

If the already installed programs in your computer are unable to open the file, then the other alternative would be to search and download an appropriate AMR player. There are several sources from the internet that you can get such media player for absolutely free. If you prefer this route however, you need to be cautious and ensure that you don’t download a program file that will hurt your computer. Ensure that you download the program from a trusted website. This is the only to avoid downloading viruses, spyware, malware and other malicious programs that might compromise the safety and security of your computer.

Convert the AMR audio file to another Audio format

If you want to save yourself from risking your computer by installing other AMR players, you can simply convert the AMR audio file to other friendly formats whose player you already have. This conversion process is not complicated in any way. There are basically two options for achieving this and they include the following-:

1. Convert AMR file online

The first option is to use various websites that offer such conversion services. There are so many of them offering the services for free and all you have to do is to simply choose the ones that suits you the most. The process will in most cases involve three simple steps: upload the AMR file, choose the format you want it converted to then download the converted file. Some sites will require you to give your email address so that they send to you the converted file to your inbox. It is up to you to choose to whether or not to give your email address.

Download AMR Converter software from http://www.mystikmedia.com/amr%5Fconverter.htm

But the best alternative would be to download the AMR converter from http://www.mystikmedia.com/amr%5Fconverter.htm and install it in your computer so that you can use it whenever you want. This trusted software has been specifically designed for the purposes of converting AMR files to other file formats. It can convert any AMR file or its variation to more than thirty different formats including FLV, MP3, MP4, WMA, WAV, AVI etc.

The software is fairly intuitive with lots of features to enable you have a very good experience with it. It converts faster and can allow you to batch convert. Though it is not available for free, it’s well worth its cost with all the features and flexibility it will give you in converting your AMR files.

2. Desktop AMR to MP3 Converters

There are other converters – both online services and desktop based software programs that you can use to get similar results if you don’t want to use the paid one above. They include but not limited to the following-:

Free AMR to MP3 Converter

Free AMR to MP3 Converter – this is a desktop software program that has been designed to convert AMR files to MP3. It has a simple and intuitive interface and it allows for the conversion of single as well as group conversion of files. Other than slowing down some computers, the converter doesn’t seem to have any other drawbacks.

Wondershare Filmora – this is a full featured video and audio converter. Other than allowing you to convert AMR files to any desired format, it also enables you to edit the file. Converting files with it is as easy as dragging and dropping files from one format to the other. The fact that it is available for both windows and Mac makes it accessible to very many users.

Apowersoft Free Online Audio Converter

Apowersoft Free Online Audio Converter – Apowersoft Free Online Converter is a web based service that lets you convert AMR files to MP3 as well as other formats like WMA, WMV, FLAC, OGG, and RA. It offers an intuitive user interface with a fast conversion process since it does not upload the AMR files to the servers before converting them.

Freestar Free AMR MP3 Converter

Freestar Free AMR MP3 Converter – this is another online service that lets you convert the poor quality AMR files to high quality MP3 files. As opposed to most of the online converters, this particular one allows you to convert multiple files at a time. It also comes with a number of features including certain advanced options to give you the ultimate power to control the whole conversion process so that you get the desired quality.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

AMR is an abbreviation for Adaptive Multi-Rate Audio Codec. It is a technology that utilizes audio compression formats primarily for speech. A typical AMR speech codec will have a multi-rate of eight bitrate values that range from 4.75kb/s to 12.2 kb/s. The structure of AMR allows the creation of a group of 160 twenty millisecond long samples by the codec in one frame. The multi-rate codec available for normal AMR files include ACELP, DTX, CAD and CNG.

In addition to compressing speech, the AMR file format can also be used for the storage of spoken audio using the same codec. There are a number of modern telephones that has the capability to store short audio recordings using the AMR format. There are also other programs, both free and proprietary that can be used to convert files from this format to other various formats and vice versa. However, since AMR file format was initially designed for storing speech or audio recordings, quality is likely to be compromised if other media files are converted into AMR.

How to Open AMR files on PC/Smartphone/Tablet

Though AMR file format was not designed for music and videos, there are certain instances when you might come across them and be confused on how to open them. The fact is that it is still possible to open AMR files with your personal computer, tablet, Smartphone or other devices.

In the case of a PC, the easiest way to open such a file is to simply double-click on it then allow the PC to decide which the most appropriate program to open it is.

If the already installed programs in your computer are unable to open the file, then the other alternative would be to search and download an appropriate AMR player. There are several sources from the internet that you can get such media player for absolutely free. If you prefer this route however, you need to be cautious and ensure that you don’t download a program file that will hurt your computer. Ensure that you download the program from a trusted website. This is the only to avoid downloading viruses, spyware, malware and other malicious programs that might compromise the safety and security of your computer.

Convert the AMR audio file to another Audio format

If you want to save yourself from risking your computer by installing other AMR players, you can simply convert the AMR audio file to other friendly formats whose player you already have. This conversion process is not complicated in any way. There are basically two options for achieving this and they include the following-:

1. Convert AMR file online

The first option is to use various websites that offer such conversion services. There are so many of them offering the services for free and all you have to do is to simply choose the ones that suits you the most. The process will in most cases involve three simple steps: upload the AMR file, choose the format you want it converted to then download the converted file. Some sites will require you to give your email address so that they send to you the converted file to your inbox. It is up to you to choose to whether or not to give your email address.

Download AMR Converter software from http://www.mystikmedia.com/amr%5Fconverter.htm

But the best alternative would be to download the AMR converter from http://www.mystikmedia.com/amr%5Fconverter.htm and install it in your computer so that you can use it whenever you want. This trusted software has been specifically designed for the purposes of converting AMR files to other file formats. It can convert any AMR file or its variation to more than thirty different formats including FLV, MP3, MP4, WMA, WAV, AVI etc.

The software is fairly intuitive with lots of features to enable you have a very good experience with it. It converts faster and can allow you to batch convert. Though it is not available for free, it’s well worth its cost with all the features and flexibility it will give you in converting your AMR files.

2. Desktop AMR to MP3 Converters

There are other converters – both online services and desktop based software programs that you can use to get similar results if you don’t want to use the paid one above. They include but not limited to the following-:

Free AMR to MP3 Converter

Free AMR to MP3 Converter – this is a desktop software program that has been designed to convert AMR files to MP3. It has a simple and intuitive interface and it allows for the conversion of single as well as group conversion of files. Other than slowing down some computers, the converter doesn’t seem to have any other drawbacks.

Wondershare Filmora – this is a full featured video and audio converter. Other than allowing you to convert AMR files to any desired format, it also enables you to edit the file. Converting files with it is as easy as dragging and dropping files from one format to the other. The fact that it is available for both windows and Mac makes it accessible to very many users.

Apowersoft Free Online Audio Converter

Apowersoft Free Online Audio Converter – Apowersoft Free Online Converter is a web based service that lets you convert AMR files to MP3 as well as other formats like WMA, WMV, FLAC, OGG, and RA. It offers an intuitive user interface with a fast conversion process since it does not upload the AMR files to the servers before converting them.

Freestar Free AMR MP3 Converter

Freestar Free AMR MP3 Converter – this is another online service that lets you convert the poor quality AMR files to high quality MP3 files. As opposed to most of the online converters, this particular one allows you to convert multiple files at a time. It also comes with a number of features including certain advanced options to give you the ultimate power to control the whole conversion process so that you get the desired quality.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

AMR is an abbreviation for Adaptive Multi-Rate Audio Codec. It is a technology that utilizes audio compression formats primarily for speech. A typical AMR speech codec will have a multi-rate of eight bitrate values that range from 4.75kb/s to 12.2 kb/s. The structure of AMR allows the creation of a group of 160 twenty millisecond long samples by the codec in one frame. The multi-rate codec available for normal AMR files include ACELP, DTX, CAD and CNG.

In addition to compressing speech, the AMR file format can also be used for the storage of spoken audio using the same codec. There are a number of modern telephones that has the capability to store short audio recordings using the AMR format. There are also other programs, both free and proprietary that can be used to convert files from this format to other various formats and vice versa. However, since AMR file format was initially designed for storing speech or audio recordings, quality is likely to be compromised if other media files are converted into AMR.

How to Open AMR files on PC/Smartphone/Tablet

Though AMR file format was not designed for music and videos, there are certain instances when you might come across them and be confused on how to open them. The fact is that it is still possible to open AMR files with your personal computer, tablet, Smartphone or other devices.

In the case of a PC, the easiest way to open such a file is to simply double-click on it then allow the PC to decide which the most appropriate program to open it is.

If the already installed programs in your computer are unable to open the file, then the other alternative would be to search and download an appropriate AMR player. There are several sources from the internet that you can get such media player for absolutely free. If you prefer this route however, you need to be cautious and ensure that you don’t download a program file that will hurt your computer. Ensure that you download the program from a trusted website. This is the only to avoid downloading viruses, spyware, malware and other malicious programs that might compromise the safety and security of your computer.

Convert the AMR audio file to another Audio format

If you want to save yourself from risking your computer by installing other AMR players, you can simply convert the AMR audio file to other friendly formats whose player you already have. This conversion process is not complicated in any way. There are basically two options for achieving this and they include the following-:

1. Convert AMR file online

The first option is to use various websites that offer such conversion services. There are so many of them offering the services for free and all you have to do is to simply choose the ones that suits you the most. The process will in most cases involve three simple steps: upload the AMR file, choose the format you want it converted to then download the converted file. Some sites will require you to give your email address so that they send to you the converted file to your inbox. It is up to you to choose to whether or not to give your email address.

Download AMR Converter software from http://www.mystikmedia.com/amr%5Fconverter.htm

But the best alternative would be to download the AMR converter from http://www.mystikmedia.com/amr%5Fconverter.htm and install it in your computer so that you can use it whenever you want. This trusted software has been specifically designed for the purposes of converting AMR files to other file formats. It can convert any AMR file or its variation to more than thirty different formats including FLV, MP3, MP4, WMA, WAV, AVI etc.

The software is fairly intuitive with lots of features to enable you have a very good experience with it. It converts faster and can allow you to batch convert. Though it is not available for free, it’s well worth its cost with all the features and flexibility it will give you in converting your AMR files.

2. Desktop AMR to MP3 Converters

There are other converters – both online services and desktop based software programs that you can use to get similar results if you don’t want to use the paid one above. They include but not limited to the following-:

Free AMR to MP3 Converter

Free AMR to MP3 Converter – this is a desktop software program that has been designed to convert AMR files to MP3. It has a simple and intuitive interface and it allows for the conversion of single as well as group conversion of files. Other than slowing down some computers, the converter doesn’t seem to have any other drawbacks.

Wondershare Filmora – this is a full featured video and audio converter. Other than allowing you to convert AMR files to any desired format, it also enables you to edit the file. Converting files with it is as easy as dragging and dropping files from one format to the other. The fact that it is available for both windows and Mac makes it accessible to very many users.

Apowersoft Free Online Audio Converter

Apowersoft Free Online Audio Converter – Apowersoft Free Online Converter is a web based service that lets you convert AMR files to MP3 as well as other formats like WMA, WMV, FLAC, OGG, and RA. It offers an intuitive user interface with a fast conversion process since it does not upload the AMR files to the servers before converting them.

Freestar Free AMR MP3 Converter

Freestar Free AMR MP3 Converter – this is another online service that lets you convert the poor quality AMR files to high quality MP3 files. As opposed to most of the online converters, this particular one allows you to convert multiple files at a time. It also comes with a number of features including certain advanced options to give you the ultimate power to control the whole conversion process so that you get the desired quality.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

The Ultimate Guide to Podcasting: Leveraging the Power of Audacity

Free audio recording & editing software audacity for podcasts is available for Windows, Linux, & macOS. Even though it’s not expressly built for podcasts, it is a popular option for recording podcasts. If you don’t mind a steep learning curve, you can easily record, edit, & export a high-quality podcast with this software.

How to Record a Podcast using Audacity

Despite its complexity, audacity for podcasts doesn’t need a detailed understanding of the software’s internals to begin using it. As a beginner, we explain all of the initial settings and basic editing choices you’ll need to know and how to output in a format that can be used for podcasting.

Here’s how to get started recording your podcast using Audacity for Podcasts:

• By selecting the box to the left of your microphone, you may choose your audio host. Select MME for Windows and Core Audio for Mac OS X.

• Select the audio interface or microphone from the menu to the right of the microphone icon. In order to record your Audacity for Podcasts, Audacity utilizes the device that you pick from this menu.

• Select your headphones by checking the box to the right of a speaker symbol. To playback, the audio files, Audacity for Podcasts utilizes the device you specify from this option.

What you need to know about Audacity’s Input Tester

Test your input before you begin recording your podcast. This helps you to make totally clear that everything is set up properly and that your podcast is recorded.

• The monitor meter may be found on the menu bar at the very top, at the very center. “Click to begin monitoring” is what it says.

• Speak normally into the microphone you’ve placed on your computer.

• Ensure that the Microphone Volume meter doesn’t go over -12dB by adjusting the volume controls.

Audacity for Podcasts Recording Tutorial

Audacity recording is simple after you’ve set up all of the settings you need. Make sure to pick just one (Mono) Recording Channel while you’re recording with a single microphone.

Each microphone is assigned a separate audio channel if you have numerous microphones connected to an audio interface or mixer. There must be a separate microphone and channel for each participant on your podcast so that you can edit them separately and make sure they all sound well together.

Each of these mono channels will be blended into stereo when you export your podcast later.

There is nothing complicated about the actual recording procedure.

• To begin recording your podcast, press the red Record button.

• When you’ve finished recording your podcast, press the black Stop button.

• Once you’ve finished recording, use Ctrl+S to save the project. If Audacity crashes or you shut it by mistake, you won’t be able to recover your edited audio file.

Using Audacity to Edit Your Podcast

Audacity for Podcasts not only allows you to record your podcast, but it also allows you to edit it afterward. It is possible to send your raw podcast to the internet as soon as you complete the recording, but editing may add a degree of polish that makes it more pleasurable for the listener.

You may use Audacity to re-arrange your podcast’s flow by cutting and relocating portions, reducing clipping, and even deleting background noise if one of your mics was too near or someone was talking too loudly. Audacity can even alter the levels of individual recordings.

Some of these editing chores are more difficult than others, but if you just have high-quality equipment & have your settings ideal, the podcast may not need a lot of effort. Check over a few different portions of your podcast to get a sense of how much work has to be done on it before publishing.

In Audacity, you may add music, clips, & sound effects to your podcast intro and outro.

In Audacity, add music, clips, & sound effects for the podcast intro and outro

In Audacity, you may add & move sound clips, such as intro music.

• Click File > Import > Audio or press Ctrl+Shift+I to import your podcast audio into Audacity.

• Make your choice of music for the opening, outro, or anything else you’d want to include.

• It is possible to go back and forth between the past and future by clicking on the top toolbar’s time shift function.

• When your opening music stops, click and drag the main podcast audio track so that it begins when the music ends.

• Add an outro or other sound effects & music that play throughout your podcast by following these similar instructions. There should be a separate channel for each sound file so that they may be easily moved across devices.
• Using the time shift tool, you may relocate an outro to the conclusion of your podcast if necessary. If you wish to add sound effects or music to your podcast, use the time shift tool to move them around.
• To test whether your audio tracks are positioned appropriately, just click the green Play button at any moment. The cursor icon in the toolbar may be used to start listening to a podcast at a different place in the track.

In Audacity, here’s how to export your podcast

After you’ve finished editing your podcast, listen to it one more time to ensure you’re satisfied with the outcome, then save it to ensure you don’t lose your work if anything goes wrong during the export process. When you export your podcast, you’re creating an audio file that you can publish to your podcast host and share with others.

Here’s how to export the Audacity podcast:

• Select File > Export > Export as… from the File menu.
• After giving your podcast a name, click Save.
• If you wish to add metadata, you may do so now, or just hit OK to begin the exporting process.
• This procedure may take a long time if the podcast is lengthy or your machine is sluggish. During this procedure, keep your computer turned on & prevent it from sleeping and hibernating.
• You’re ready to publish your podcast to the podcast host once it’s finished exporting.

Conclusions

For recording, editing, & mixing your own podcast, an Audacity is a great option. And, like many podcasters, you could discover it meets your long-term requirements. With regard to voice effects, we talk about how people may use Filmora to modify and improve their voices. Filmora has the ability to re-speak video and audio, as well as previously recorded voiceovers. Video, audio, and voiceover files may all benefit from the Timeline’s Pitch feature. Change the tonality of a video or recording to give it a unique sound. It’s easy to replace the voices in the videos using Filmora. A video or narrative should accompany your viral in order for it to be effective. Changing Pitch allows you to alter the pitch of your voice. You may modify the pace of the video to alter the voice (Optional). Make a backup copy of the altered media.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• Select the audio interface or microphone from the menu to the right of the microphone icon. In order to record your Audacity for Podcasts, Audacity utilizes the device that you pick from this menu.

• Select your headphones by checking the box to the right of a speaker symbol. To playback, the audio files, Audacity for Podcasts utilizes the device you specify from this option.

What you need to know about Audacity’s Input Tester

Test your input before you begin recording your podcast. This helps you to make totally clear that everything is set up properly and that your podcast is recorded.

• The monitor meter may be found on the menu bar at the very top, at the very center. “Click to begin monitoring” is what it says.

• Speak normally into the microphone you’ve placed on your computer.

• Ensure that the Microphone Volume meter doesn’t go over -12dB by adjusting the volume controls.

Audacity for Podcasts Recording Tutorial

Audacity recording is simple after you’ve set up all of the settings you need. Make sure to pick just one (Mono) Recording Channel while you’re recording with a single microphone.

Each microphone is assigned a separate audio channel if you have numerous microphones connected to an audio interface or mixer. There must be a separate microphone and channel for each participant on your podcast so that you can edit them separately and make sure they all sound well together.

Each of these mono channels will be blended into stereo when you export your podcast later.

There is nothing complicated about the actual recording procedure.

• To begin recording your podcast, press the red Record button.

• When you’ve finished recording your podcast, press the black Stop button.

• Once you’ve finished recording, use Ctrl+S to save the project. If Audacity crashes or you shut it by mistake, you won’t be able to recover your edited audio file.

Using Audacity to Edit Your Podcast

Audacity for Podcasts not only allows you to record your podcast, but it also allows you to edit it afterward. It is possible to send your raw podcast to the internet as soon as you complete the recording, but editing may add a degree of polish that makes it more pleasurable for the listener.

You may use Audacity to re-arrange your podcast’s flow by cutting and relocating portions, reducing clipping, and even deleting background noise if one of your mics was too near or someone was talking too loudly. Audacity can even alter the levels of individual recordings.

Some of these editing chores are more difficult than others, but if you just have high-quality equipment & have your settings ideal, the podcast may not need a lot of effort. Check over a few different portions of your podcast to get a sense of how much work has to be done on it before publishing.

In Audacity, you may add music, clips, & sound effects to your podcast intro and outro.

In Audacity, add music, clips, & sound effects for the podcast intro and outro

In Audacity, you may add & move sound clips, such as intro music.

• Click File > Import > Audio or press Ctrl+Shift+I to import your podcast audio into Audacity.

• Make your choice of music for the opening, outro, or anything else you’d want to include.

• It is possible to go back and forth between the past and future by clicking on the top toolbar’s time shift function.

• When your opening music stops, click and drag the main podcast audio track so that it begins when the music ends.

• Add an outro or other sound effects & music that play throughout your podcast by following these similar instructions. There should be a separate channel for each sound file so that they may be easily moved across devices.
• Using the time shift tool, you may relocate an outro to the conclusion of your podcast if necessary. If you wish to add sound effects or music to your podcast, use the time shift tool to move them around.
• To test whether your audio tracks are positioned appropriately, just click the green Play button at any moment. The cursor icon in the toolbar may be used to start listening to a podcast at a different place in the track.

In Audacity, here’s how to export your podcast

After you’ve finished editing your podcast, listen to it one more time to ensure you’re satisfied with the outcome, then save it to ensure you don’t lose your work if anything goes wrong during the export process. When you export your podcast, you’re creating an audio file that you can publish to your podcast host and share with others.

Here’s how to export the Audacity podcast:

• Select File > Export > Export as… from the File menu.
• After giving your podcast a name, click Save.
• If you wish to add metadata, you may do so now, or just hit OK to begin the exporting process.
• This procedure may take a long time if the podcast is lengthy or your machine is sluggish. During this procedure, keep your computer turned on & prevent it from sleeping and hibernating.
• You’re ready to publish your podcast to the podcast host once it’s finished exporting.

Conclusions

For recording, editing, & mixing your own podcast, an Audacity is a great option. And, like many podcasters, you could discover it meets your long-term requirements. With regard to voice effects, we talk about how people may use Filmora to modify and improve their voices. Filmora has the ability to re-speak video and audio, as well as previously recorded voiceovers. Video, audio, and voiceover files may all benefit from the Timeline’s Pitch feature. Change the tonality of a video or recording to give it a unique sound. It’s easy to replace the voices in the videos using Filmora. A video or narrative should accompany your viral in order for it to be effective. Changing Pitch allows you to alter the pitch of your voice. You may modify the pace of the video to alter the voice (Optional). Make a backup copy of the altered media.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• Select the audio interface or microphone from the menu to the right of the microphone icon. In order to record your Audacity for Podcasts, Audacity utilizes the device that you pick from this menu.

• Select your headphones by checking the box to the right of a speaker symbol. To playback, the audio files, Audacity for Podcasts utilizes the device you specify from this option.

What you need to know about Audacity’s Input Tester

Test your input before you begin recording your podcast. This helps you to make totally clear that everything is set up properly and that your podcast is recorded.

• The monitor meter may be found on the menu bar at the very top, at the very center. “Click to begin monitoring” is what it says.

• Speak normally into the microphone you’ve placed on your computer.

• Ensure that the Microphone Volume meter doesn’t go over -12dB by adjusting the volume controls.

Audacity for Podcasts Recording Tutorial

Audacity recording is simple after you’ve set up all of the settings you need. Make sure to pick just one (Mono) Recording Channel while you’re recording with a single microphone.

Each microphone is assigned a separate audio channel if you have numerous microphones connected to an audio interface or mixer. There must be a separate microphone and channel for each participant on your podcast so that you can edit them separately and make sure they all sound well together.

Each of these mono channels will be blended into stereo when you export your podcast later.

There is nothing complicated about the actual recording procedure.

• To begin recording your podcast, press the red Record button.

• When you’ve finished recording your podcast, press the black Stop button.

• Once you’ve finished recording, use Ctrl+S to save the project. If Audacity crashes or you shut it by mistake, you won’t be able to recover your edited audio file.

Using Audacity to Edit Your Podcast

Audacity for Podcasts not only allows you to record your podcast, but it also allows you to edit it afterward. It is possible to send your raw podcast to the internet as soon as you complete the recording, but editing may add a degree of polish that makes it more pleasurable for the listener.

You may use Audacity to re-arrange your podcast’s flow by cutting and relocating portions, reducing clipping, and even deleting background noise if one of your mics was too near or someone was talking too loudly. Audacity can even alter the levels of individual recordings.

Some of these editing chores are more difficult than others, but if you just have high-quality equipment & have your settings ideal, the podcast may not need a lot of effort. Check over a few different portions of your podcast to get a sense of how much work has to be done on it before publishing.

In Audacity, you may add music, clips, & sound effects to your podcast intro and outro.

In Audacity, add music, clips, & sound effects for the podcast intro and outro

In Audacity, you may add & move sound clips, such as intro music.

• Click File > Import > Audio or press Ctrl+Shift+I to import your podcast audio into Audacity.

• Make your choice of music for the opening, outro, or anything else you’d want to include.

• It is possible to go back and forth between the past and future by clicking on the top toolbar’s time shift function.

• When your opening music stops, click and drag the main podcast audio track so that it begins when the music ends.

• Add an outro or other sound effects & music that play throughout your podcast by following these similar instructions. There should be a separate channel for each sound file so that they may be easily moved across devices.
• Using the time shift tool, you may relocate an outro to the conclusion of your podcast if necessary. If you wish to add sound effects or music to your podcast, use the time shift tool to move them around.
• To test whether your audio tracks are positioned appropriately, just click the green Play button at any moment. The cursor icon in the toolbar may be used to start listening to a podcast at a different place in the track.

In Audacity, here’s how to export your podcast

After you’ve finished editing your podcast, listen to it one more time to ensure you’re satisfied with the outcome, then save it to ensure you don’t lose your work if anything goes wrong during the export process. When you export your podcast, you’re creating an audio file that you can publish to your podcast host and share with others.

Here’s how to export the Audacity podcast:

• Select File > Export > Export as… from the File menu.
• After giving your podcast a name, click Save.
• If you wish to add metadata, you may do so now, or just hit OK to begin the exporting process.
• This procedure may take a long time if the podcast is lengthy or your machine is sluggish. During this procedure, keep your computer turned on & prevent it from sleeping and hibernating.
• You’re ready to publish your podcast to the podcast host once it’s finished exporting.

Conclusions

For recording, editing, & mixing your own podcast, an Audacity is a great option. And, like many podcasters, you could discover it meets your long-term requirements. With regard to voice effects, we talk about how people may use Filmora to modify and improve their voices. Filmora has the ability to re-speak video and audio, as well as previously recorded voiceovers. Video, audio, and voiceover files may all benefit from the Timeline’s Pitch feature. Change the tonality of a video or recording to give it a unique sound. It’s easy to replace the voices in the videos using Filmora. A video or narrative should accompany your viral in order for it to be effective. Changing Pitch allows you to alter the pitch of your voice. You may modify the pace of the video to alter the voice (Optional). Make a backup copy of the altered media.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• Select the audio interface or microphone from the menu to the right of the microphone icon. In order to record your Audacity for Podcasts, Audacity utilizes the device that you pick from this menu.

• Select your headphones by checking the box to the right of a speaker symbol. To playback, the audio files, Audacity for Podcasts utilizes the device you specify from this option.

What you need to know about Audacity’s Input Tester

Test your input before you begin recording your podcast. This helps you to make totally clear that everything is set up properly and that your podcast is recorded.

• The monitor meter may be found on the menu bar at the very top, at the very center. “Click to begin monitoring” is what it says.

• Speak normally into the microphone you’ve placed on your computer.

• Ensure that the Microphone Volume meter doesn’t go over -12dB by adjusting the volume controls.

Audacity for Podcasts Recording Tutorial

Audacity recording is simple after you’ve set up all of the settings you need. Make sure to pick just one (Mono) Recording Channel while you’re recording with a single microphone.

Each microphone is assigned a separate audio channel if you have numerous microphones connected to an audio interface or mixer. There must be a separate microphone and channel for each participant on your podcast so that you can edit them separately and make sure they all sound well together.

Each of these mono channels will be blended into stereo when you export your podcast later.

There is nothing complicated about the actual recording procedure.

• To begin recording your podcast, press the red Record button.

• When you’ve finished recording your podcast, press the black Stop button.

• Once you’ve finished recording, use Ctrl+S to save the project. If Audacity crashes or you shut it by mistake, you won’t be able to recover your edited audio file.

Using Audacity to Edit Your Podcast

Audacity for Podcasts not only allows you to record your podcast, but it also allows you to edit it afterward. It is possible to send your raw podcast to the internet as soon as you complete the recording, but editing may add a degree of polish that makes it more pleasurable for the listener.

You may use Audacity to re-arrange your podcast’s flow by cutting and relocating portions, reducing clipping, and even deleting background noise if one of your mics was too near or someone was talking too loudly. Audacity can even alter the levels of individual recordings.

Some of these editing chores are more difficult than others, but if you just have high-quality equipment & have your settings ideal, the podcast may not need a lot of effort. Check over a few different portions of your podcast to get a sense of how much work has to be done on it before publishing.

In Audacity, you may add music, clips, & sound effects to your podcast intro and outro.

In Audacity, add music, clips, & sound effects for the podcast intro and outro

In Audacity, you may add & move sound clips, such as intro music.

• Click File > Import > Audio or press Ctrl+Shift+I to import your podcast audio into Audacity.

• Make your choice of music for the opening, outro, or anything else you’d want to include.

• It is possible to go back and forth between the past and future by clicking on the top toolbar’s time shift function.

• When your opening music stops, click and drag the main podcast audio track so that it begins when the music ends.

• Add an outro or other sound effects & music that play throughout your podcast by following these similar instructions. There should be a separate channel for each sound file so that they may be easily moved across devices.
• Using the time shift tool, you may relocate an outro to the conclusion of your podcast if necessary. If you wish to add sound effects or music to your podcast, use the time shift tool to move them around.
• To test whether your audio tracks are positioned appropriately, just click the green Play button at any moment. The cursor icon in the toolbar may be used to start listening to a podcast at a different place in the track.

In Audacity, here’s how to export your podcast

After you’ve finished editing your podcast, listen to it one more time to ensure you’re satisfied with the outcome, then save it to ensure you don’t lose your work if anything goes wrong during the export process. When you export your podcast, you’re creating an audio file that you can publish to your podcast host and share with others.

Here’s how to export the Audacity podcast:

• Select File > Export > Export as… from the File menu.
• After giving your podcast a name, click Save.
• If you wish to add metadata, you may do so now, or just hit OK to begin the exporting process.
• This procedure may take a long time if the podcast is lengthy or your machine is sluggish. During this procedure, keep your computer turned on & prevent it from sleeping and hibernating.
• You’re ready to publish your podcast to the podcast host once it’s finished exporting.

Conclusions

For recording, editing, & mixing your own podcast, an Audacity is a great option. And, like many podcasters, you could discover it meets your long-term requirements. With regard to voice effects, we talk about how people may use Filmora to modify and improve their voices. Filmora has the ability to re-speak video and audio, as well as previously recorded voiceovers. Video, audio, and voiceover files may all benefit from the Timeline’s Pitch feature. Change the tonality of a video or recording to give it a unique sound. It’s easy to replace the voices in the videos using Filmora. A video or narrative should accompany your viral in order for it to be effective. Changing Pitch allows you to alter the pitch of your voice. You may modify the pace of the video to alter the voice (Optional). Make a backup copy of the altered media.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Also read: