5 Best Free MP3 Volume Normalizer

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Speedy Silencing: Eradicating Static and White Noise From Audio Tracks

It will be challenging to remove static noise from audio since the language is often muddled by ambient noise, such as the dreaded whirring of an air conditioning unit or fans. This can make it challenging to get good audio. It is common practice to eliminate background noise before recording and mixing sound effects or working on other areas of the video’s design.

You are lucky since the Internet allows you to choose a few strategies for removing noise from audio. You may lessen the amount of noise in your video or audio recording by including some background music or by utilizing software that edits audio or video. This article will significantly assist you in searching for a method to remove static sound from audio, so keep that in mind as you read it. Let’s get started!

Part 1: How to Remove Static Noise from Audio Files with Only & Free tools?

Consider shaky or unclear video to be a problem. Audio noise may damage your video just as fast as poor visual quality. It may be tricky to remove static sound from audio, however. Additionally, it might be difficult to capture clear audio, particularly in busy areas. There are occasions when you get hissy or otherwise noisy audio, whether because of background noise or less-than-ideal equipment.

1. Audiodenoise

The tool lets you change many things, like the time smoothing of the noise reduction filter, the noise model based on tracking noise modulation, the size of the analysis blocks, etc. So, how do you remove the static audio in the background?

Here are the steps to take.

How to use Audio Denoise to get rid of static noise

Step1 Click on the “Choose File” option to start. You can also choose the video from the list of “Demo files.”

Step2 Press the Process button after you’ve uploaded the file to eliminate the noise in the audio.

Step3 After the audio is done being processed, click the Download button to save your video to your PC.

2. Wondershare AILab

You may remove static from audio by using Wondershare AILab. There is no need to specify any settings since the AI will identify and eliminate noise on its own automatically. To improve audio quality, use a noise reduction technique based on AI. No more noise will be from the breeze, the crowd, or another unwelcome sound. AILab gives you access to various free online tools that make creating images, sounds, and videos simpler and more enjoyable.

How to use Wondershare AILab to remove static sound from audio

Step1 First, choose or drag your audio file to start uploading it.

Step2 The AI will analyze the file automatically and eliminate the static sound.

Step3 Finally, at this moment, download the revised audio file.

3. Veed.io

With VEED, you can simultaneously record your computer screen and camera, making it simple to produce instructional films for professional or personal use.

VEED is one of the most straightforward online video editors that can remove static from audio with just one click of the mouse, making it an excellent choice for people who are just starting. You don’t need to re-record your audio or purchase expensive microphones that block sound. It can help you eliminate background noise from MP3, WMA, and other audio files, but with a watermark.

How do I remove static sound from the audio file using Veed online?

Step1 To upload your audio file, click the “Choose Audio” button to upload your audio file.

Step2 Click on the audio track to open the Settings menu, then choose “Clean Audio” from the list of options. The background noise will vanish on its own in a few seconds.

Step3 That’s it; you’re done. When you click “Export,” you will make your new file in a few seconds.

Part 2: How to improve your audio in the best way?

Wondershare is the company that has produced the Filmora family of video production and editing apps. Filmora offers software that may be used by various skill levels, from novice to intermediate. A timeline, a preview window, and an effects library are some of the standard elements of Filmora. These features are accessed and controlled by a drag-and-drop user interface.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

The Filmora software collection may run on machines running either Windows or macOS operating systems. It is possible to get free product samples to test them out before buying them. On the official Filmora website, you can see pricing choices for each program.

The Filmora Video Editor is easy to use and delivers various features superior to those provided by other video editors. Because of this, it is considered one of the best audio editors to answer how to remove static from audio and video.

Here is how to remove static noise from audio with Filmora.

Step1 Upload Files

Open Wondershare Filmora and load your video into the timeline window. You can get a video preview, cut it up, and remove the bits you don’t want to preserve.

Step2 Edit Audio

Select “Edit Audio” by using the context menu after right-clicking the movie in the timeline. You will see four options: silence detection, modify audio, disconnect audio, and mute. Choose the “Audio” option from the drop-down menu if you want to separate the audio from the video.

Step3 Remove Background Static

Double-click on the audio track to eliminate the background noise directly, and pick “normal denoise” from the Edit Panel. You may also double-click the video clip in the timeline to reach the Editing panel without first separating the audio from the video. Once there, you can edit the audio and eliminate the noise by clicking on the Audio tab in the Editing panel.

Step4 Fine Tune and Export

Lastly, with Equalizer, fine-tune the sound to make it more natural. For a better effect, adjust the audio frame by frame until it fits perfectly with the video. After the result, you can click “Export” to save the less noisy video on your PC or directly post it to YouTube or Vimeo.

Part 3: How to Record Noise-Free Audio?

So, that was how to remove static sound from audio. But what if you record noise-free audio instead?

If you record with a microphone and continue to hear static noise, the problem most likely lies in the cable. Most microphone cables consist of one or two conductors (wires) braided together inside a metal. This is the function that protection fulfills. It prevents the hum or static created by signals coming from outside from interfering with the signal flowing via the internal conductors.

If one of the shield connections at either end of the wire is only sometimes present or isn’t there, this might produce static electricity. If you can access the connection, check that all cables and shields are connected safely and securely.

Near a stable electromagnetic source is another possible explanation for static, which may be industrial motors or high-power radio transmitters.

Another characteristic of microphones is their impedance. It would be best to use microphone with the same impedance as the recording device.

One last step is to test the static using a different microphone to determine whether the problem persists. If this is the case, the recording device can be the source of the issue.

Conclusion

Do you believe that a grainy or unsteady video is a problem? Video quality is vital, but audio noise can quickly damage your film. However, removing static sound from audio may be a pain in the neck. In addition, capturing clear audio may be challenging, particularly in areas with a lot of background noise.

Now you have an audio file with less or no noise and want to learn how to remove static noise from audio. With the above suggestions, I hope you’ll find eliminating background noise from the video easy. If you want to be more creative in removing static noise from audio, try the Filmora video editor to give your mind a boost.

Free Download For macOS 10.14 or later

The Filmora software collection may run on machines running either Windows or macOS operating systems. It is possible to get free product samples to test them out before buying them. On the official Filmora website, you can see pricing choices for each program.

The Filmora Video Editor is easy to use and delivers various features superior to those provided by other video editors. Because of this, it is considered one of the best audio editors to answer how to remove static from audio and video.

Here is how to remove static noise from audio with Filmora.

Step1 Upload Files

Open Wondershare Filmora and load your video into the timeline window. You can get a video preview, cut it up, and remove the bits you don’t want to preserve.

Step2 Edit Audio

Select “Edit Audio” by using the context menu after right-clicking the movie in the timeline. You will see four options: silence detection, modify audio, disconnect audio, and mute. Choose the “Audio” option from the drop-down menu if you want to separate the audio from the video.

Step3 Remove Background Static

Double-click on the audio track to eliminate the background noise directly, and pick “normal denoise” from the Edit Panel. You may also double-click the video clip in the timeline to reach the Editing panel without first separating the audio from the video. Once there, you can edit the audio and eliminate the noise by clicking on the Audio tab in the Editing panel.

Step4 Fine Tune and Export

Lastly, with Equalizer, fine-tune the sound to make it more natural. For a better effect, adjust the audio frame by frame until it fits perfectly with the video. After the result, you can click “Export” to save the less noisy video on your PC or directly post it to YouTube or Vimeo.

Part 3: How to Record Noise-Free Audio?

So, that was how to remove static sound from audio. But what if you record noise-free audio instead?

If you record with a microphone and continue to hear static noise, the problem most likely lies in the cable. Most microphone cables consist of one or two conductors (wires) braided together inside a metal. This is the function that protection fulfills. It prevents the hum or static created by signals coming from outside from interfering with the signal flowing via the internal conductors.

If one of the shield connections at either end of the wire is only sometimes present or isn’t there, this might produce static electricity. If you can access the connection, check that all cables and shields are connected safely and securely.

Near a stable electromagnetic source is another possible explanation for static, which may be industrial motors or high-power radio transmitters.

Another characteristic of microphones is their impedance. It would be best to use microphone with the same impedance as the recording device.

One last step is to test the static using a different microphone to determine whether the problem persists. If this is the case, the recording device can be the source of the issue.

Conclusion

Do you believe that a grainy or unsteady video is a problem? Video quality is vital, but audio noise can quickly damage your film. However, removing static sound from audio may be a pain in the neck. In addition, capturing clear audio may be challenging, particularly in areas with a lot of background noise.

Now you have an audio file with less or no noise and want to learn how to remove static noise from audio. With the above suggestions, I hope you’ll find eliminating background noise from the video easy. If you want to be more creative in removing static noise from audio, try the Filmora video editor to give your mind a boost.

Navigating the Best Options for Mac MP3 Metadata Editors

Some people love to collect and organize songs, and they are addicted to creating music libraries. Are you one of them? If you are, you must know how things are organized, but if you have never organized a music library, let’s tell you how it’s done. ID3 tags are used to store information. You can use the tags and store the artist’s name, song name, genre, and whatever you want.

You might organize music according to artist or dates; however, you like it. The problem arises when you don’t have correct information stored in the tags. For this reason, Mac MP3 tag editors are used. If you are a Mac user, who wants to edit tags, let’s provide you with a list of the best Mac music tag editors. Let’s get started!

In this article

01 What Need to Be Considered Before Choosing a Mac MP3 Tag Editor?

02 5 Recommended Mac MP3 Tag Editor

Part 1. What Need to Be Considered Before Choosing a Mac MP3 Tag Editor

Have you ever looked at the internet and the number of options you get whenever you search for MP3 tag editor Mac free? The page is all packed and loaded with tons of different options. No doubt it’s tough to select a good tag editor, but what if we tell you some tricks for selecting a great Mac music tag editor? Without any further delay, let’s begin.

· Easy to User Interface

A primary factor that is considered while selecting any tool, the editor, is its interface. If any software offers a complex interface, users don’t prefer it. An easy interface means all the editing, manipulating, adding, deleting options appear on the front. Users don’t have to struggle to find basic options.

· Online Database Search

If any macOS MP3 tag editor offers an online database search means it’s a good editor. This is because not all editors support online search. The option is very helpful as the online search shares all the information related to any searched tag.

· Editing Options

How many editing options do you prefer? Editing metadata means that you should be able to edit and manipulate as many fields as possible. For instance, the Mac music tag editor should allow changing the singer’s name, year tag, and all the other fields.

· Batch Processing

Editing is a stressful and hectic job. Is there a way to help yourself? Let’s share about Batch Processing. If the Mac MP3 tag editor allows batch processing, then it’s a great choice. This is because editing individually can take hours, but batch processing reduces the editing time as well as the editing efforts.

· Supported Formats

How many formats can your Mac music tag editor support? Although all the tools are MP3 tag editors, not all audio files have MP3 format. For this reason, always select the tag editor that can support and edit different files formats.

Part 2. 5 Recommended Mac MP3 Tag Editor

After talking about the options to consider before selecting any macOS MP3 tag editor, it’s the perfect time to share some tag editors with all the Mac users. So, let’s talk about the 5 best tag editors without any further delay.

1. Wondershare UniConverter

Wondershare UniConverter is a great choice as a Mac MP3 tag editor. This software can be used for multiple purposes. UniConverter is amazing as it can download and record files from various sites. An extra thing, Wondershare UniConverter can also convert files to different formats.

Key Features

• The most important thing, UniConverter supports searching from online databases. You just have to type the information in the search bar.
• For fixing or editing the Metadata, head to the ‘Fix Media Metadata’ tab from the main screen so that you can manipulate the information.
• UniConverter offers a long list of options that you can amend, for instance, song name, artist, year, track number, and whatnot.

2. Metadatics

Metadatics is an audio metadata editor. It is developed by ‘Mark V.’ Metadatics is specially made for Mac OS X. Being powerful is not the description for Metadatics. It is an advanced-level editing tool for metadata editing. Metadatics allow multiple formats to be edited, including MP4, M3A, AIFF, WAV, FLAC, OGG, and WMA.

Key Features

• Metadatics can handle your problems with a large number of editing. It can quickly and easily edit a batch of up to 10,000 files.
• It allows you to rename your files. Along with that, it can generate directory structures depending on the file’s metadata.
• Metadatics has support for images and artwork. Artwork can be extracted from the files and saved as a separate image.

3. MetaBliss

Moving on, let’s talk about MetaBliss, ID3 tag editor. This editor is specifically for macOS X users that allows fast and quick editing of MP3 tags where you can change the comments, artist, song name, or whatever you like. This Mac MP3 tag editor is known for its performance, and hence, it can fix and edit hundreds of files at once without any trouble.

Key Features

• This tag editor provides easy search and easy replacement of words in tags. It is powerful enough to handle and edit multiple tags simultaneously.
• If you have any old tags as ID3v1, MetaBliss will remove them because they are now obsolete and useless.
• Do extra spaces annoy you? Try MetaBliss; it also features to remove extra spaces within the tags. Moreover, copying tags is very easy; you just have to drag them down.

4. Amvidia

Amvidia is a very famous macOS MP3 tag editor. Do you know the best part about Amvidia? You can edit over 60 types of tags with this editor for your videos. Amvidia MP3 tag editor works like magic as it can rename multiple files together. In addition to this, the editor also supports managing artworks.

Key Features

• The best thing about using Amvidia is its compatibility. The MP3 tag editor is fully compatible and works perfectly with all Mac operating system versions.
• Amvidia allows you to find and replace the texts and numbers. Moreover, this editor can also load tags from paths like Music or iTunes.
• This tag editor is magical as it can clean all the wrong encodings of the tags. Additionally, it removes all the extra spaces and characters.

5. MusicBrainz Picard

Picard is an editing tool developed by MusicBrainz. It is a cross-platform music tagger that is written in Python. Picard is mainly used by Mac users but can be used on any platform. It is an open-source editing tool that is licensed under GPL 2.0 or later.

It is hosted on GitHub. Picard is used for its efficiency, and it can look after entire music CDs with a single click quickly.

Key Features

• Picard has a variety of plug-in support. If you need anything, you can look into the available plug-in, or even you can write your own.
• It uses AcoustID audio fingerprints. This makes them identifiable by actual audio even there is no metadata available for the particular file.
• Picard supports all the popular formats that are used. These formats include MP3, M4A, FLAC, WMA, OGG, WAV, and many more.

Bottom Line

The article solely focused on sharing and discussing Mac MP3 tag editors. We hope that this article proves helpful for you. Let’s also talk a little about Wondershare Filmora Video Editor , the platform that has made editing easy.

You just name a feature, and Filmora will already have it. The editor offers Basic options like merge, split, cut, trim, etc. If we talk about Advanced options, you get AI Portrait, Normalization, Stabilize Video, Auto Reframe, and much more than this.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 5 Recommended Mac MP3 Tag Editor

Part 1. What Need to Be Considered Before Choosing a Mac MP3 Tag Editor

Have you ever looked at the internet and the number of options you get whenever you search for MP3 tag editor Mac free? The page is all packed and loaded with tons of different options. No doubt it’s tough to select a good tag editor, but what if we tell you some tricks for selecting a great Mac music tag editor? Without any further delay, let’s begin.

· Easy to User Interface

A primary factor that is considered while selecting any tool, the editor, is its interface. If any software offers a complex interface, users don’t prefer it. An easy interface means all the editing, manipulating, adding, deleting options appear on the front. Users don’t have to struggle to find basic options.

· Online Database Search

If any macOS MP3 tag editor offers an online database search means it’s a good editor. This is because not all editors support online search. The option is very helpful as the online search shares all the information related to any searched tag.

· Editing Options

How many editing options do you prefer? Editing metadata means that you should be able to edit and manipulate as many fields as possible. For instance, the Mac music tag editor should allow changing the singer’s name, year tag, and all the other fields.

· Batch Processing

Editing is a stressful and hectic job. Is there a way to help yourself? Let’s share about Batch Processing. If the Mac MP3 tag editor allows batch processing, then it’s a great choice. This is because editing individually can take hours, but batch processing reduces the editing time as well as the editing efforts.

· Supported Formats

How many formats can your Mac music tag editor support? Although all the tools are MP3 tag editors, not all audio files have MP3 format. For this reason, always select the tag editor that can support and edit different files formats.

Part 2. 5 Recommended Mac MP3 Tag Editor

After talking about the options to consider before selecting any macOS MP3 tag editor, it’s the perfect time to share some tag editors with all the Mac users. So, let’s talk about the 5 best tag editors without any further delay.

1. Wondershare UniConverter

Wondershare UniConverter is a great choice as a Mac MP3 tag editor. This software can be used for multiple purposes. UniConverter is amazing as it can download and record files from various sites. An extra thing, Wondershare UniConverter can also convert files to different formats.

Key Features

• The most important thing, UniConverter supports searching from online databases. You just have to type the information in the search bar.
• For fixing or editing the Metadata, head to the ‘Fix Media Metadata’ tab from the main screen so that you can manipulate the information.
• UniConverter offers a long list of options that you can amend, for instance, song name, artist, year, track number, and whatnot.

2. Metadatics

Metadatics is an audio metadata editor. It is developed by ‘Mark V.’ Metadatics is specially made for Mac OS X. Being powerful is not the description for Metadatics. It is an advanced-level editing tool for metadata editing. Metadatics allow multiple formats to be edited, including MP4, M3A, AIFF, WAV, FLAC, OGG, and WMA.

Key Features

• Metadatics can handle your problems with a large number of editing. It can quickly and easily edit a batch of up to 10,000 files.
• It allows you to rename your files. Along with that, it can generate directory structures depending on the file’s metadata.
• Metadatics has support for images and artwork. Artwork can be extracted from the files and saved as a separate image.

3. MetaBliss

Moving on, let’s talk about MetaBliss, ID3 tag editor. This editor is specifically for macOS X users that allows fast and quick editing of MP3 tags where you can change the comments, artist, song name, or whatever you like. This Mac MP3 tag editor is known for its performance, and hence, it can fix and edit hundreds of files at once without any trouble.

Key Features

• This tag editor provides easy search and easy replacement of words in tags. It is powerful enough to handle and edit multiple tags simultaneously.
• If you have any old tags as ID3v1, MetaBliss will remove them because they are now obsolete and useless.
• Do extra spaces annoy you? Try MetaBliss; it also features to remove extra spaces within the tags. Moreover, copying tags is very easy; you just have to drag them down.

4. Amvidia

Amvidia is a very famous macOS MP3 tag editor. Do you know the best part about Amvidia? You can edit over 60 types of tags with this editor for your videos. Amvidia MP3 tag editor works like magic as it can rename multiple files together. In addition to this, the editor also supports managing artworks.

Key Features

• The best thing about using Amvidia is its compatibility. The MP3 tag editor is fully compatible and works perfectly with all Mac operating system versions.
• Amvidia allows you to find and replace the texts and numbers. Moreover, this editor can also load tags from paths like Music or iTunes.
• This tag editor is magical as it can clean all the wrong encodings of the tags. Additionally, it removes all the extra spaces and characters.

5. MusicBrainz Picard

Picard is an editing tool developed by MusicBrainz. It is a cross-platform music tagger that is written in Python. Picard is mainly used by Mac users but can be used on any platform. It is an open-source editing tool that is licensed under GPL 2.0 or later.

It is hosted on GitHub. Picard is used for its efficiency, and it can look after entire music CDs with a single click quickly.

Key Features

• Picard has a variety of plug-in support. If you need anything, you can look into the available plug-in, or even you can write your own.
• It uses AcoustID audio fingerprints. This makes them identifiable by actual audio even there is no metadata available for the particular file.
• Picard supports all the popular formats that are used. These formats include MP3, M4A, FLAC, WMA, OGG, WAV, and many more.

Bottom Line

The article solely focused on sharing and discussing Mac MP3 tag editors. We hope that this article proves helpful for you. Let’s also talk a little about Wondershare Filmora Video Editor , the platform that has made editing easy.

You just name a feature, and Filmora will already have it. The editor offers Basic options like merge, split, cut, trim, etc. If we talk about Advanced options, you get AI Portrait, Normalization, Stabilize Video, Auto Reframe, and much more than this.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 5 Recommended Mac MP3 Tag Editor

Part 1. What Need to Be Considered Before Choosing a Mac MP3 Tag Editor

Have you ever looked at the internet and the number of options you get whenever you search for MP3 tag editor Mac free? The page is all packed and loaded with tons of different options. No doubt it’s tough to select a good tag editor, but what if we tell you some tricks for selecting a great Mac music tag editor? Without any further delay, let’s begin.

· Easy to User Interface

A primary factor that is considered while selecting any tool, the editor, is its interface. If any software offers a complex interface, users don’t prefer it. An easy interface means all the editing, manipulating, adding, deleting options appear on the front. Users don’t have to struggle to find basic options.

· Online Database Search

If any macOS MP3 tag editor offers an online database search means it’s a good editor. This is because not all editors support online search. The option is very helpful as the online search shares all the information related to any searched tag.

· Editing Options

How many editing options do you prefer? Editing metadata means that you should be able to edit and manipulate as many fields as possible. For instance, the Mac music tag editor should allow changing the singer’s name, year tag, and all the other fields.

· Batch Processing

Editing is a stressful and hectic job. Is there a way to help yourself? Let’s share about Batch Processing. If the Mac MP3 tag editor allows batch processing, then it’s a great choice. This is because editing individually can take hours, but batch processing reduces the editing time as well as the editing efforts.

· Supported Formats

How many formats can your Mac music tag editor support? Although all the tools are MP3 tag editors, not all audio files have MP3 format. For this reason, always select the tag editor that can support and edit different files formats.

Part 2. 5 Recommended Mac MP3 Tag Editor

After talking about the options to consider before selecting any macOS MP3 tag editor, it’s the perfect time to share some tag editors with all the Mac users. So, let’s talk about the 5 best tag editors without any further delay.

1. Wondershare UniConverter

Wondershare UniConverter is a great choice as a Mac MP3 tag editor. This software can be used for multiple purposes. UniConverter is amazing as it can download and record files from various sites. An extra thing, Wondershare UniConverter can also convert files to different formats.

Key Features

• The most important thing, UniConverter supports searching from online databases. You just have to type the information in the search bar.
• For fixing or editing the Metadata, head to the ‘Fix Media Metadata’ tab from the main screen so that you can manipulate the information.
• UniConverter offers a long list of options that you can amend, for instance, song name, artist, year, track number, and whatnot.

2. Metadatics

Metadatics is an audio metadata editor. It is developed by ‘Mark V.’ Metadatics is specially made for Mac OS X. Being powerful is not the description for Metadatics. It is an advanced-level editing tool for metadata editing. Metadatics allow multiple formats to be edited, including MP4, M3A, AIFF, WAV, FLAC, OGG, and WMA.

Key Features

• Metadatics can handle your problems with a large number of editing. It can quickly and easily edit a batch of up to 10,000 files.
• It allows you to rename your files. Along with that, it can generate directory structures depending on the file’s metadata.
• Metadatics has support for images and artwork. Artwork can be extracted from the files and saved as a separate image.

3. MetaBliss

Moving on, let’s talk about MetaBliss, ID3 tag editor. This editor is specifically for macOS X users that allows fast and quick editing of MP3 tags where you can change the comments, artist, song name, or whatever you like. This Mac MP3 tag editor is known for its performance, and hence, it can fix and edit hundreds of files at once without any trouble.

Key Features

• This tag editor provides easy search and easy replacement of words in tags. It is powerful enough to handle and edit multiple tags simultaneously.
• If you have any old tags as ID3v1, MetaBliss will remove them because they are now obsolete and useless.
• Do extra spaces annoy you? Try MetaBliss; it also features to remove extra spaces within the tags. Moreover, copying tags is very easy; you just have to drag them down.

4. Amvidia

Amvidia is a very famous macOS MP3 tag editor. Do you know the best part about Amvidia? You can edit over 60 types of tags with this editor for your videos. Amvidia MP3 tag editor works like magic as it can rename multiple files together. In addition to this, the editor also supports managing artworks.

Key Features

• The best thing about using Amvidia is its compatibility. The MP3 tag editor is fully compatible and works perfectly with all Mac operating system versions.
• Amvidia allows you to find and replace the texts and numbers. Moreover, this editor can also load tags from paths like Music or iTunes.
• This tag editor is magical as it can clean all the wrong encodings of the tags. Additionally, it removes all the extra spaces and characters.

5. MusicBrainz Picard

Picard is an editing tool developed by MusicBrainz. It is a cross-platform music tagger that is written in Python. Picard is mainly used by Mac users but can be used on any platform. It is an open-source editing tool that is licensed under GPL 2.0 or later.

It is hosted on GitHub. Picard is used for its efficiency, and it can look after entire music CDs with a single click quickly.

Key Features

• Picard has a variety of plug-in support. If you need anything, you can look into the available plug-in, or even you can write your own.
• It uses AcoustID audio fingerprints. This makes them identifiable by actual audio even there is no metadata available for the particular file.
• Picard supports all the popular formats that are used. These formats include MP3, M4A, FLAC, WMA, OGG, WAV, and many more.

Bottom Line

The article solely focused on sharing and discussing Mac MP3 tag editors. We hope that this article proves helpful for you. Let’s also talk a little about Wondershare Filmora Video Editor , the platform that has made editing easy.

You just name a feature, and Filmora will already have it. The editor offers Basic options like merge, split, cut, trim, etc. If we talk about Advanced options, you get AI Portrait, Normalization, Stabilize Video, Auto Reframe, and much more than this.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 5 Recommended Mac MP3 Tag Editor

Part 1. What Need to Be Considered Before Choosing a Mac MP3 Tag Editor

Have you ever looked at the internet and the number of options you get whenever you search for MP3 tag editor Mac free? The page is all packed and loaded with tons of different options. No doubt it’s tough to select a good tag editor, but what if we tell you some tricks for selecting a great Mac music tag editor? Without any further delay, let’s begin.

· Easy to User Interface

A primary factor that is considered while selecting any tool, the editor, is its interface. If any software offers a complex interface, users don’t prefer it. An easy interface means all the editing, manipulating, adding, deleting options appear on the front. Users don’t have to struggle to find basic options.

· Online Database Search

If any macOS MP3 tag editor offers an online database search means it’s a good editor. This is because not all editors support online search. The option is very helpful as the online search shares all the information related to any searched tag.

· Editing Options

How many editing options do you prefer? Editing metadata means that you should be able to edit and manipulate as many fields as possible. For instance, the Mac music tag editor should allow changing the singer’s name, year tag, and all the other fields.

· Batch Processing

Editing is a stressful and hectic job. Is there a way to help yourself? Let’s share about Batch Processing. If the Mac MP3 tag editor allows batch processing, then it’s a great choice. This is because editing individually can take hours, but batch processing reduces the editing time as well as the editing efforts.

· Supported Formats

How many formats can your Mac music tag editor support? Although all the tools are MP3 tag editors, not all audio files have MP3 format. For this reason, always select the tag editor that can support and edit different files formats.

Part 2. 5 Recommended Mac MP3 Tag Editor

After talking about the options to consider before selecting any macOS MP3 tag editor, it’s the perfect time to share some tag editors with all the Mac users. So, let’s talk about the 5 best tag editors without any further delay.

1. Wondershare UniConverter

Wondershare UniConverter is a great choice as a Mac MP3 tag editor. This software can be used for multiple purposes. UniConverter is amazing as it can download and record files from various sites. An extra thing, Wondershare UniConverter can also convert files to different formats.

Key Features

• The most important thing, UniConverter supports searching from online databases. You just have to type the information in the search bar.
• For fixing or editing the Metadata, head to the ‘Fix Media Metadata’ tab from the main screen so that you can manipulate the information.
• UniConverter offers a long list of options that you can amend, for instance, song name, artist, year, track number, and whatnot.

2. Metadatics

Metadatics is an audio metadata editor. It is developed by ‘Mark V.’ Metadatics is specially made for Mac OS X. Being powerful is not the description for Metadatics. It is an advanced-level editing tool for metadata editing. Metadatics allow multiple formats to be edited, including MP4, M3A, AIFF, WAV, FLAC, OGG, and WMA.

Key Features

• Metadatics can handle your problems with a large number of editing. It can quickly and easily edit a batch of up to 10,000 files.
• It allows you to rename your files. Along with that, it can generate directory structures depending on the file’s metadata.
• Metadatics has support for images and artwork. Artwork can be extracted from the files and saved as a separate image.

3. MetaBliss

Moving on, let’s talk about MetaBliss, ID3 tag editor. This editor is specifically for macOS X users that allows fast and quick editing of MP3 tags where you can change the comments, artist, song name, or whatever you like. This Mac MP3 tag editor is known for its performance, and hence, it can fix and edit hundreds of files at once without any trouble.

Key Features

• This tag editor provides easy search and easy replacement of words in tags. It is powerful enough to handle and edit multiple tags simultaneously.
• If you have any old tags as ID3v1, MetaBliss will remove them because they are now obsolete and useless.
• Do extra spaces annoy you? Try MetaBliss; it also features to remove extra spaces within the tags. Moreover, copying tags is very easy; you just have to drag them down.

4. Amvidia

Amvidia is a very famous macOS MP3 tag editor. Do you know the best part about Amvidia? You can edit over 60 types of tags with this editor for your videos. Amvidia MP3 tag editor works like magic as it can rename multiple files together. In addition to this, the editor also supports managing artworks.

Key Features

• The best thing about using Amvidia is its compatibility. The MP3 tag editor is fully compatible and works perfectly with all Mac operating system versions.
• Amvidia allows you to find and replace the texts and numbers. Moreover, this editor can also load tags from paths like Music or iTunes.
• This tag editor is magical as it can clean all the wrong encodings of the tags. Additionally, it removes all the extra spaces and characters.

5. MusicBrainz Picard

Picard is an editing tool developed by MusicBrainz. It is a cross-platform music tagger that is written in Python. Picard is mainly used by Mac users but can be used on any platform. It is an open-source editing tool that is licensed under GPL 2.0 or later.

It is hosted on GitHub. Picard is used for its efficiency, and it can look after entire music CDs with a single click quickly.

Key Features

• Picard has a variety of plug-in support. If you need anything, you can look into the available plug-in, or even you can write your own.
• It uses AcoustID audio fingerprints. This makes them identifiable by actual audio even there is no metadata available for the particular file.
• Picard supports all the popular formats that are used. These formats include MP3, M4A, FLAC, WMA, OGG, WAV, and many more.

Bottom Line

The article solely focused on sharing and discussing Mac MP3 tag editors. We hope that this article proves helpful for you. Let’s also talk a little about Wondershare Filmora Video Editor , the platform that has made editing easy.

You just name a feature, and Filmora will already have it. The editor offers Basic options like merge, split, cut, trim, etc. If we talk about Advanced options, you get AI Portrait, Normalization, Stabilize Video, Auto Reframe, and much more than this.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Also read: