Guiding Steps for Harmonizing Sound Amplitude in VLC Playback

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

“The Sound Detective’s Handbook: Extracting Silence From Video Files in iOS/OS X Systems”

How to Cut Audio from Video on iPhone/Mac

Liza Brown

Jan 23, 2024• Proven solutions

Having to cut audio from video is not an impossible task but without the right knowledge, it looks difficult. The first thing anyone diving into video editing needs to know is that it requires good software that works with the device you will be using to cut the audio. After understanding the need for software and securing the right one, it is also expedient to know the acceptable audio format that would go well with your editing duties.

In this article, you will not just be exposed to the software to use on iPhone and Mac. But, you will also have a detailed guide of how you can use that software like a pro in editing videos. If this is what you want, continue reading.

Section1. How to mute the audio on the video

Section2. Requirements to extract the music of the video and save

Section 1. How to mute the audio on the video

Part1. Steps to cut the audio from videos on Mac

Part2. Steps to cut the audio from videos on iPhone

Steps to cut the audio from videos on Mac

If you are using a Mac for editing, knowing that Filmora is the best way to go about it is good but knowing how to navigate is key. Not to worry, the steps you need to get started are all listed in these three steps.

Step 1: Import Video to Filmora

Import the video to your Filmora. You can also directly drag the video into the Filmora interface.

Step 2: Mute the audio

After dragging the video to the timeline, right-click the stand-alone video, choose “mute”.

Step 3: Save your edit

Click the “export” button on the interface and select the desired video format

Steps to cut the audio from videos on iPhone

If you want to do the mute on an iPhone, you will need to also follow some steps to get it done on your iMovie.

Step 1: Open the iMovie

Opening the iMovie app goes beyond just clicking it to open, you also have to follow up this process by clicking the continue button that pops up. If the app has opened and you can see an inviting interface, move to the next step.

Step 2: Select a video you want

There are different pages on the interface but your concern is on the project page. On that page, click on the plus sign button as it directs you to start or input a new video. After clicking on the plus sign, it will bring up movies that you would further select.

Don’t hesitate to select the movie you want to edit. Complete the process by clicking the “create movie” button beneath the gallery of movies.

Step 3: Mute the audio

Muting the audio becomes straightforward when you have moved it to the interface. In this step, click on the video clip button as seen in the picture then mute it by selecting the mute option (the picture below shows the mute sign at the lower-left corner) from the audio button. When this is done, your video has been silenced.

Don’t forget to save it when you are done editing by clicking on the “done button” that is visible at the left corner positioned at the top of the screen.

Section 2. Requirements to extract the music of the video and save

There are some times when you just want to extract the audio leaving out the video. Maybe the song accompanying the video is excellent but the video quality is bad, or maybe the video is not as great as the song. Whatever the reason may be, you can extract the music of your video and save it using. The two best apps to do this are Filmora and MP3 Converter -Audio Extractor. Below are the steps to extract audio using Filmora

Step1. import the video into the Filmora

Another way to import a video is to drag and drop the video into the program. Using any of these two steps allows your video to be listed in the media library

Step 2 Next, right-click the video and choose “Audio Detach.” After some time, the video and audio will load as two separate files.

You can choose to delete the video or keep it. If you want to delete it, simply right-click and choose delete. This will remove the video entirely.

Step 3. Edit the extracted audio by doubling clicking on it. When you do, the audio editing tools would be displayed. You can adjust the music volume, change voice, and do other edits.

Step 4. If the audio has some sounds you would like to take out, place your cursor at the exact place you want the deletion to start. Next, press the split button. This step can be used to delete any aspect of the music sound you don’t like.

Step 5. Having extracted, edited, and deleted unnecessary sounds from the music, click the export button. You will be provided with different options to save the audio. Click on the one you prefer.

You can also customize your audio encoder after extracting and saving the music. Simply click Settings to get started.

Conclusion

As previously stated, editing a video requires choosing the right software that would support a successful editing journey. Although there are many options mac users can select from when looking for video editing software, the one that is highly recommended is theFilmora software. Aside from being an easy to use App, it supports a wide range of audio. Audio formats like MP3, MPA, WMA, M4V, WAV are all working well with this software which makes it a great choice.

For iPhone users, a good video editing software that can be used to successfully cut out audio even as a novice is the iMovie. With iMovie software. Video editing is a lot easier and faster with this software. Plus, the software also supports many audio formats which is a good advantage to your editing quest.

Learn More: How to Add Music/ Audio to a GIF on Mac>>>

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Jan 23, 2024• Proven solutions

Having to cut audio from video is not an impossible task but without the right knowledge, it looks difficult. The first thing anyone diving into video editing needs to know is that it requires good software that works with the device you will be using to cut the audio. After understanding the need for software and securing the right one, it is also expedient to know the acceptable audio format that would go well with your editing duties.

In this article, you will not just be exposed to the software to use on iPhone and Mac. But, you will also have a detailed guide of how you can use that software like a pro in editing videos. If this is what you want, continue reading.

Section1. How to mute the audio on the video

Section2. Requirements to extract the music of the video and save

Section 1. How to mute the audio on the video

Part1. Steps to cut the audio from videos on Mac

Part2. Steps to cut the audio from videos on iPhone

Steps to cut the audio from videos on Mac

If you are using a Mac for editing, knowing that Filmora is the best way to go about it is good but knowing how to navigate is key. Not to worry, the steps you need to get started are all listed in these three steps.

Step 1: Import Video to Filmora

Import the video to your Filmora. You can also directly drag the video into the Filmora interface.

Step 2: Mute the audio

After dragging the video to the timeline, right-click the stand-alone video, choose “mute”.

Step 3: Save your edit

Click the “export” button on the interface and select the desired video format

Steps to cut the audio from videos on iPhone

If you want to do the mute on an iPhone, you will need to also follow some steps to get it done on your iMovie.

Step 1: Open the iMovie

Opening the iMovie app goes beyond just clicking it to open, you also have to follow up this process by clicking the continue button that pops up. If the app has opened and you can see an inviting interface, move to the next step.

Step 2: Select a video you want

There are different pages on the interface but your concern is on the project page. On that page, click on the plus sign button as it directs you to start or input a new video. After clicking on the plus sign, it will bring up movies that you would further select.

Don’t hesitate to select the movie you want to edit. Complete the process by clicking the “create movie” button beneath the gallery of movies.

Step 3: Mute the audio

Muting the audio becomes straightforward when you have moved it to the interface. In this step, click on the video clip button as seen in the picture then mute it by selecting the mute option (the picture below shows the mute sign at the lower-left corner) from the audio button. When this is done, your video has been silenced.

Don’t forget to save it when you are done editing by clicking on the “done button” that is visible at the left corner positioned at the top of the screen.

Section 2. Requirements to extract the music of the video and save

There are some times when you just want to extract the audio leaving out the video. Maybe the song accompanying the video is excellent but the video quality is bad, or maybe the video is not as great as the song. Whatever the reason may be, you can extract the music of your video and save it using. The two best apps to do this are Filmora and MP3 Converter -Audio Extractor. Below are the steps to extract audio using Filmora

Step1. import the video into the Filmora

Another way to import a video is to drag and drop the video into the program. Using any of these two steps allows your video to be listed in the media library

Step 2 Next, right-click the video and choose “Audio Detach.” After some time, the video and audio will load as two separate files.

You can choose to delete the video or keep it. If you want to delete it, simply right-click and choose delete. This will remove the video entirely.

Step 3. Edit the extracted audio by doubling clicking on it. When you do, the audio editing tools would be displayed. You can adjust the music volume, change voice, and do other edits.

Step 4. If the audio has some sounds you would like to take out, place your cursor at the exact place you want the deletion to start. Next, press the split button. This step can be used to delete any aspect of the music sound you don’t like.

Step 5. Having extracted, edited, and deleted unnecessary sounds from the music, click the export button. You will be provided with different options to save the audio. Click on the one you prefer.

You can also customize your audio encoder after extracting and saving the music. Simply click Settings to get started.

Conclusion

As previously stated, editing a video requires choosing the right software that would support a successful editing journey. Although there are many options mac users can select from when looking for video editing software, the one that is highly recommended is theFilmora software. Aside from being an easy to use App, it supports a wide range of audio. Audio formats like MP3, MPA, WMA, M4V, WAV are all working well with this software which makes it a great choice.

For iPhone users, a good video editing software that can be used to successfully cut out audio even as a novice is the iMovie. With iMovie software. Video editing is a lot easier and faster with this software. Plus, the software also supports many audio formats which is a good advantage to your editing quest.

Learn More: How to Add Music/ Audio to a GIF on Mac>>>

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Jan 23, 2024• Proven solutions

Having to cut audio from video is not an impossible task but without the right knowledge, it looks difficult. The first thing anyone diving into video editing needs to know is that it requires good software that works with the device you will be using to cut the audio. After understanding the need for software and securing the right one, it is also expedient to know the acceptable audio format that would go well with your editing duties.

In this article, you will not just be exposed to the software to use on iPhone and Mac. But, you will also have a detailed guide of how you can use that software like a pro in editing videos. If this is what you want, continue reading.

Section1. How to mute the audio on the video

Section2. Requirements to extract the music of the video and save

Section 1. How to mute the audio on the video

Part1. Steps to cut the audio from videos on Mac

Part2. Steps to cut the audio from videos on iPhone

Steps to cut the audio from videos on Mac

If you are using a Mac for editing, knowing that Filmora is the best way to go about it is good but knowing how to navigate is key. Not to worry, the steps you need to get started are all listed in these three steps.

Step 1: Import Video to Filmora

Import the video to your Filmora. You can also directly drag the video into the Filmora interface.

Step 2: Mute the audio

After dragging the video to the timeline, right-click the stand-alone video, choose “mute”.

Step 3: Save your edit

Click the “export” button on the interface and select the desired video format

Steps to cut the audio from videos on iPhone

If you want to do the mute on an iPhone, you will need to also follow some steps to get it done on your iMovie.

Step 1: Open the iMovie

Opening the iMovie app goes beyond just clicking it to open, you also have to follow up this process by clicking the continue button that pops up. If the app has opened and you can see an inviting interface, move to the next step.

Step 2: Select a video you want

There are different pages on the interface but your concern is on the project page. On that page, click on the plus sign button as it directs you to start or input a new video. After clicking on the plus sign, it will bring up movies that you would further select.

Don’t hesitate to select the movie you want to edit. Complete the process by clicking the “create movie” button beneath the gallery of movies.

Step 3: Mute the audio

Muting the audio becomes straightforward when you have moved it to the interface. In this step, click on the video clip button as seen in the picture then mute it by selecting the mute option (the picture below shows the mute sign at the lower-left corner) from the audio button. When this is done, your video has been silenced.

Don’t forget to save it when you are done editing by clicking on the “done button” that is visible at the left corner positioned at the top of the screen.

Section 2. Requirements to extract the music of the video and save

There are some times when you just want to extract the audio leaving out the video. Maybe the song accompanying the video is excellent but the video quality is bad, or maybe the video is not as great as the song. Whatever the reason may be, you can extract the music of your video and save it using. The two best apps to do this are Filmora and MP3 Converter -Audio Extractor. Below are the steps to extract audio using Filmora

Step1. import the video into the Filmora

Another way to import a video is to drag and drop the video into the program. Using any of these two steps allows your video to be listed in the media library

Step 2 Next, right-click the video and choose “Audio Detach.” After some time, the video and audio will load as two separate files.

You can choose to delete the video or keep it. If you want to delete it, simply right-click and choose delete. This will remove the video entirely.

Step 3. Edit the extracted audio by doubling clicking on it. When you do, the audio editing tools would be displayed. You can adjust the music volume, change voice, and do other edits.

Step 4. If the audio has some sounds you would like to take out, place your cursor at the exact place you want the deletion to start. Next, press the split button. This step can be used to delete any aspect of the music sound you don’t like.

Step 5. Having extracted, edited, and deleted unnecessary sounds from the music, click the export button. You will be provided with different options to save the audio. Click on the one you prefer.

You can also customize your audio encoder after extracting and saving the music. Simply click Settings to get started.

Conclusion

As previously stated, editing a video requires choosing the right software that would support a successful editing journey. Although there are many options mac users can select from when looking for video editing software, the one that is highly recommended is theFilmora software. Aside from being an easy to use App, it supports a wide range of audio. Audio formats like MP3, MPA, WMA, M4V, WAV are all working well with this software which makes it a great choice.

For iPhone users, a good video editing software that can be used to successfully cut out audio even as a novice is the iMovie. With iMovie software. Video editing is a lot easier and faster with this software. Plus, the software also supports many audio formats which is a good advantage to your editing quest.

Learn More: How to Add Music/ Audio to a GIF on Mac>>>

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Jan 23, 2024• Proven solutions

Having to cut audio from video is not an impossible task but without the right knowledge, it looks difficult. The first thing anyone diving into video editing needs to know is that it requires good software that works with the device you will be using to cut the audio. After understanding the need for software and securing the right one, it is also expedient to know the acceptable audio format that would go well with your editing duties.

In this article, you will not just be exposed to the software to use on iPhone and Mac. But, you will also have a detailed guide of how you can use that software like a pro in editing videos. If this is what you want, continue reading.

Section1. How to mute the audio on the video

Section2. Requirements to extract the music of the video and save

Section 1. How to mute the audio on the video

Part1. Steps to cut the audio from videos on Mac

Part2. Steps to cut the audio from videos on iPhone

Steps to cut the audio from videos on Mac

If you are using a Mac for editing, knowing that Filmora is the best way to go about it is good but knowing how to navigate is key. Not to worry, the steps you need to get started are all listed in these three steps.

Step 1: Import Video to Filmora

Import the video to your Filmora. You can also directly drag the video into the Filmora interface.

Step 2: Mute the audio

After dragging the video to the timeline, right-click the stand-alone video, choose “mute”.

Step 3: Save your edit

Click the “export” button on the interface and select the desired video format

Steps to cut the audio from videos on iPhone

If you want to do the mute on an iPhone, you will need to also follow some steps to get it done on your iMovie.

Step 1: Open the iMovie

Opening the iMovie app goes beyond just clicking it to open, you also have to follow up this process by clicking the continue button that pops up. If the app has opened and you can see an inviting interface, move to the next step.

Step 2: Select a video you want

There are different pages on the interface but your concern is on the project page. On that page, click on the plus sign button as it directs you to start or input a new video. After clicking on the plus sign, it will bring up movies that you would further select.

Don’t hesitate to select the movie you want to edit. Complete the process by clicking the “create movie” button beneath the gallery of movies.

Step 3: Mute the audio

Muting the audio becomes straightforward when you have moved it to the interface. In this step, click on the video clip button as seen in the picture then mute it by selecting the mute option (the picture below shows the mute sign at the lower-left corner) from the audio button. When this is done, your video has been silenced.

Don’t forget to save it when you are done editing by clicking on the “done button” that is visible at the left corner positioned at the top of the screen.

Section 2. Requirements to extract the music of the video and save

There are some times when you just want to extract the audio leaving out the video. Maybe the song accompanying the video is excellent but the video quality is bad, or maybe the video is not as great as the song. Whatever the reason may be, you can extract the music of your video and save it using. The two best apps to do this are Filmora and MP3 Converter -Audio Extractor. Below are the steps to extract audio using Filmora

Step1. import the video into the Filmora

Another way to import a video is to drag and drop the video into the program. Using any of these two steps allows your video to be listed in the media library

Step 2 Next, right-click the video and choose “Audio Detach.” After some time, the video and audio will load as two separate files.

You can choose to delete the video or keep it. If you want to delete it, simply right-click and choose delete. This will remove the video entirely.

Step 3. Edit the extracted audio by doubling clicking on it. When you do, the audio editing tools would be displayed. You can adjust the music volume, change voice, and do other edits.

Step 4. If the audio has some sounds you would like to take out, place your cursor at the exact place you want the deletion to start. Next, press the split button. This step can be used to delete any aspect of the music sound you don’t like.

Step 5. Having extracted, edited, and deleted unnecessary sounds from the music, click the export button. You will be provided with different options to save the audio. Click on the one you prefer.

You can also customize your audio encoder after extracting and saving the music. Simply click Settings to get started.

Conclusion

As previously stated, editing a video requires choosing the right software that would support a successful editing journey. Although there are many options mac users can select from when looking for video editing software, the one that is highly recommended is theFilmora software. Aside from being an easy to use App, it supports a wide range of audio. Audio formats like MP3, MPA, WMA, M4V, WAV are all working well with this software which makes it a great choice.

For iPhone users, a good video editing software that can be used to successfully cut out audio even as a novice is the iMovie. With iMovie software. Video editing is a lot easier and faster with this software. Plus, the software also supports many audio formats which is a good advantage to your editing quest.

Learn More: How to Add Music/ Audio to a GIF on Mac>>>

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Mastering Top Mac MP3 Labeling Software: A Comprehensive Guide

Some people love to collect and organize songs, and they are addicted to creating music libraries. Are you one of them? If you are, you must know how things are organized, but if you have never organized a music library, let’s tell you how it’s done. ID3 tags are used to store information. You can use the tags and store the artist’s name, song name, genre, and whatever you want.

You might organize music according to artist or dates; however, you like it. The problem arises when you don’t have correct information stored in the tags. For this reason, Mac MP3 tag editors are used. If you are a Mac user, who wants to edit tags, let’s provide you with a list of the best Mac music tag editors. Let’s get started!

In this article

01 What Need to Be Considered Before Choosing a Mac MP3 Tag Editor?

02 5 Recommended Mac MP3 Tag Editor

Part 1. What Need to Be Considered Before Choosing a Mac MP3 Tag Editor

Have you ever looked at the internet and the number of options you get whenever you search for MP3 tag editor Mac free? The page is all packed and loaded with tons of different options. No doubt it’s tough to select a good tag editor, but what if we tell you some tricks for selecting a great Mac music tag editor? Without any further delay, let’s begin.

· Easy to User Interface

A primary factor that is considered while selecting any tool, the editor, is its interface. If any software offers a complex interface, users don’t prefer it. An easy interface means all the editing, manipulating, adding, deleting options appear on the front. Users don’t have to struggle to find basic options.

· Online Database Search

If any macOS MP3 tag editor offers an online database search means it’s a good editor. This is because not all editors support online search. The option is very helpful as the online search shares all the information related to any searched tag.

· Editing Options

How many editing options do you prefer? Editing metadata means that you should be able to edit and manipulate as many fields as possible. For instance, the Mac music tag editor should allow changing the singer’s name, year tag, and all the other fields.

· Batch Processing

Editing is a stressful and hectic job. Is there a way to help yourself? Let’s share about Batch Processing. If the Mac MP3 tag editor allows batch processing, then it’s a great choice. This is because editing individually can take hours, but batch processing reduces the editing time as well as the editing efforts.

· Supported Formats

How many formats can your Mac music tag editor support? Although all the tools are MP3 tag editors, not all audio files have MP3 format. For this reason, always select the tag editor that can support and edit different files formats.

Part 2. 5 Recommended Mac MP3 Tag Editor

After talking about the options to consider before selecting any macOS MP3 tag editor, it’s the perfect time to share some tag editors with all the Mac users. So, let’s talk about the 5 best tag editors without any further delay.

1. Wondershare UniConverter

Wondershare UniConverter is a great choice as a Mac MP3 tag editor. This software can be used for multiple purposes. UniConverter is amazing as it can download and record files from various sites. An extra thing, Wondershare UniConverter can also convert files to different formats.

Key Features

• The most important thing, UniConverter supports searching from online databases. You just have to type the information in the search bar.
• For fixing or editing the Metadata, head to the ‘Fix Media Metadata’ tab from the main screen so that you can manipulate the information.
• UniConverter offers a long list of options that you can amend, for instance, song name, artist, year, track number, and whatnot.

2. Metadatics

Metadatics is an audio metadata editor. It is developed by ‘Mark V.’ Metadatics is specially made for Mac OS X. Being powerful is not the description for Metadatics. It is an advanced-level editing tool for metadata editing. Metadatics allow multiple formats to be edited, including MP4, M3A, AIFF, WAV, FLAC, OGG, and WMA.

Key Features

• Metadatics can handle your problems with a large number of editing. It can quickly and easily edit a batch of up to 10,000 files.
• It allows you to rename your files. Along with that, it can generate directory structures depending on the file’s metadata.
• Metadatics has support for images and artwork. Artwork can be extracted from the files and saved as a separate image.

3. MetaBliss

Moving on, let’s talk about MetaBliss, ID3 tag editor. This editor is specifically for macOS X users that allows fast and quick editing of MP3 tags where you can change the comments, artist, song name, or whatever you like. This Mac MP3 tag editor is known for its performance, and hence, it can fix and edit hundreds of files at once without any trouble.

Key Features

• This tag editor provides easy search and easy replacement of words in tags. It is powerful enough to handle and edit multiple tags simultaneously.
• If you have any old tags as ID3v1, MetaBliss will remove them because they are now obsolete and useless.
• Do extra spaces annoy you? Try MetaBliss; it also features to remove extra spaces within the tags. Moreover, copying tags is very easy; you just have to drag them down.

4. Amvidia

Amvidia is a very famous macOS MP3 tag editor. Do you know the best part about Amvidia? You can edit over 60 types of tags with this editor for your videos. Amvidia MP3 tag editor works like magic as it can rename multiple files together. In addition to this, the editor also supports managing artworks.

Key Features

• The best thing about using Amvidia is its compatibility. The MP3 tag editor is fully compatible and works perfectly with all Mac operating system versions.
• Amvidia allows you to find and replace the texts and numbers. Moreover, this editor can also load tags from paths like Music or iTunes.
• This tag editor is magical as it can clean all the wrong encodings of the tags. Additionally, it removes all the extra spaces and characters.

5. MusicBrainz Picard

Picard is an editing tool developed by MusicBrainz. It is a cross-platform music tagger that is written in Python. Picard is mainly used by Mac users but can be used on any platform. It is an open-source editing tool that is licensed under GPL 2.0 or later.

It is hosted on GitHub. Picard is used for its efficiency, and it can look after entire music CDs with a single click quickly.

Key Features

• Picard has a variety of plug-in support. If you need anything, you can look into the available plug-in, or even you can write your own.
• It uses AcoustID audio fingerprints. This makes them identifiable by actual audio even there is no metadata available for the particular file.
• Picard supports all the popular formats that are used. These formats include MP3, M4A, FLAC, WMA, OGG, WAV, and many more.

Bottom Line

The article solely focused on sharing and discussing Mac MP3 tag editors. We hope that this article proves helpful for you. Let’s also talk a little about Wondershare Filmora Video Editor , the platform that has made editing easy.

You just name a feature, and Filmora will already have it. The editor offers Basic options like merge, split, cut, trim, etc. If we talk about Advanced options, you get AI Portrait, Normalization, Stabilize Video, Auto Reframe, and much more than this.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 5 Recommended Mac MP3 Tag Editor

Part 1. What Need to Be Considered Before Choosing a Mac MP3 Tag Editor

Have you ever looked at the internet and the number of options you get whenever you search for MP3 tag editor Mac free? The page is all packed and loaded with tons of different options. No doubt it’s tough to select a good tag editor, but what if we tell you some tricks for selecting a great Mac music tag editor? Without any further delay, let’s begin.

· Easy to User Interface

A primary factor that is considered while selecting any tool, the editor, is its interface. If any software offers a complex interface, users don’t prefer it. An easy interface means all the editing, manipulating, adding, deleting options appear on the front. Users don’t have to struggle to find basic options.

· Online Database Search

If any macOS MP3 tag editor offers an online database search means it’s a good editor. This is because not all editors support online search. The option is very helpful as the online search shares all the information related to any searched tag.

· Editing Options

How many editing options do you prefer? Editing metadata means that you should be able to edit and manipulate as many fields as possible. For instance, the Mac music tag editor should allow changing the singer’s name, year tag, and all the other fields.

· Batch Processing

Editing is a stressful and hectic job. Is there a way to help yourself? Let’s share about Batch Processing. If the Mac MP3 tag editor allows batch processing, then it’s a great choice. This is because editing individually can take hours, but batch processing reduces the editing time as well as the editing efforts.

· Supported Formats

How many formats can your Mac music tag editor support? Although all the tools are MP3 tag editors, not all audio files have MP3 format. For this reason, always select the tag editor that can support and edit different files formats.

Part 2. 5 Recommended Mac MP3 Tag Editor

After talking about the options to consider before selecting any macOS MP3 tag editor, it’s the perfect time to share some tag editors with all the Mac users. So, let’s talk about the 5 best tag editors without any further delay.

1. Wondershare UniConverter

Wondershare UniConverter is a great choice as a Mac MP3 tag editor. This software can be used for multiple purposes. UniConverter is amazing as it can download and record files from various sites. An extra thing, Wondershare UniConverter can also convert files to different formats.

Key Features

• The most important thing, UniConverter supports searching from online databases. You just have to type the information in the search bar.
• For fixing or editing the Metadata, head to the ‘Fix Media Metadata’ tab from the main screen so that you can manipulate the information.
• UniConverter offers a long list of options that you can amend, for instance, song name, artist, year, track number, and whatnot.

2. Metadatics

Metadatics is an audio metadata editor. It is developed by ‘Mark V.’ Metadatics is specially made for Mac OS X. Being powerful is not the description for Metadatics. It is an advanced-level editing tool for metadata editing. Metadatics allow multiple formats to be edited, including MP4, M3A, AIFF, WAV, FLAC, OGG, and WMA.

Key Features

• Metadatics can handle your problems with a large number of editing. It can quickly and easily edit a batch of up to 10,000 files.
• It allows you to rename your files. Along with that, it can generate directory structures depending on the file’s metadata.
• Metadatics has support for images and artwork. Artwork can be extracted from the files and saved as a separate image.

3. MetaBliss

Moving on, let’s talk about MetaBliss, ID3 tag editor. This editor is specifically for macOS X users that allows fast and quick editing of MP3 tags where you can change the comments, artist, song name, or whatever you like. This Mac MP3 tag editor is known for its performance, and hence, it can fix and edit hundreds of files at once without any trouble.

Key Features

• This tag editor provides easy search and easy replacement of words in tags. It is powerful enough to handle and edit multiple tags simultaneously.
• If you have any old tags as ID3v1, MetaBliss will remove them because they are now obsolete and useless.
• Do extra spaces annoy you? Try MetaBliss; it also features to remove extra spaces within the tags. Moreover, copying tags is very easy; you just have to drag them down.

4. Amvidia

Amvidia is a very famous macOS MP3 tag editor. Do you know the best part about Amvidia? You can edit over 60 types of tags with this editor for your videos. Amvidia MP3 tag editor works like magic as it can rename multiple files together. In addition to this, the editor also supports managing artworks.

Key Features

• The best thing about using Amvidia is its compatibility. The MP3 tag editor is fully compatible and works perfectly with all Mac operating system versions.
• Amvidia allows you to find and replace the texts and numbers. Moreover, this editor can also load tags from paths like Music or iTunes.
• This tag editor is magical as it can clean all the wrong encodings of the tags. Additionally, it removes all the extra spaces and characters.

5. MusicBrainz Picard

Picard is an editing tool developed by MusicBrainz. It is a cross-platform music tagger that is written in Python. Picard is mainly used by Mac users but can be used on any platform. It is an open-source editing tool that is licensed under GPL 2.0 or later.

It is hosted on GitHub. Picard is used for its efficiency, and it can look after entire music CDs with a single click quickly.

Key Features

• Picard has a variety of plug-in support. If you need anything, you can look into the available plug-in, or even you can write your own.
• It uses AcoustID audio fingerprints. This makes them identifiable by actual audio even there is no metadata available for the particular file.
• Picard supports all the popular formats that are used. These formats include MP3, M4A, FLAC, WMA, OGG, WAV, and many more.

Bottom Line

The article solely focused on sharing and discussing Mac MP3 tag editors. We hope that this article proves helpful for you. Let’s also talk a little about Wondershare Filmora Video Editor , the platform that has made editing easy.

You just name a feature, and Filmora will already have it. The editor offers Basic options like merge, split, cut, trim, etc. If we talk about Advanced options, you get AI Portrait, Normalization, Stabilize Video, Auto Reframe, and much more than this.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 5 Recommended Mac MP3 Tag Editor

Part 1. What Need to Be Considered Before Choosing a Mac MP3 Tag Editor

Have you ever looked at the internet and the number of options you get whenever you search for MP3 tag editor Mac free? The page is all packed and loaded with tons of different options. No doubt it’s tough to select a good tag editor, but what if we tell you some tricks for selecting a great Mac music tag editor? Without any further delay, let’s begin.

· Easy to User Interface

A primary factor that is considered while selecting any tool, the editor, is its interface. If any software offers a complex interface, users don’t prefer it. An easy interface means all the editing, manipulating, adding, deleting options appear on the front. Users don’t have to struggle to find basic options.

· Online Database Search

If any macOS MP3 tag editor offers an online database search means it’s a good editor. This is because not all editors support online search. The option is very helpful as the online search shares all the information related to any searched tag.

· Editing Options

How many editing options do you prefer? Editing metadata means that you should be able to edit and manipulate as many fields as possible. For instance, the Mac music tag editor should allow changing the singer’s name, year tag, and all the other fields.

· Batch Processing

Editing is a stressful and hectic job. Is there a way to help yourself? Let’s share about Batch Processing. If the Mac MP3 tag editor allows batch processing, then it’s a great choice. This is because editing individually can take hours, but batch processing reduces the editing time as well as the editing efforts.

· Supported Formats

How many formats can your Mac music tag editor support? Although all the tools are MP3 tag editors, not all audio files have MP3 format. For this reason, always select the tag editor that can support and edit different files formats.

Part 2. 5 Recommended Mac MP3 Tag Editor

After talking about the options to consider before selecting any macOS MP3 tag editor, it’s the perfect time to share some tag editors with all the Mac users. So, let’s talk about the 5 best tag editors without any further delay.

1. Wondershare UniConverter

Wondershare UniConverter is a great choice as a Mac MP3 tag editor. This software can be used for multiple purposes. UniConverter is amazing as it can download and record files from various sites. An extra thing, Wondershare UniConverter can also convert files to different formats.

Key Features

• The most important thing, UniConverter supports searching from online databases. You just have to type the information in the search bar.
• For fixing or editing the Metadata, head to the ‘Fix Media Metadata’ tab from the main screen so that you can manipulate the information.
• UniConverter offers a long list of options that you can amend, for instance, song name, artist, year, track number, and whatnot.

2. Metadatics

Metadatics is an audio metadata editor. It is developed by ‘Mark V.’ Metadatics is specially made for Mac OS X. Being powerful is not the description for Metadatics. It is an advanced-level editing tool for metadata editing. Metadatics allow multiple formats to be edited, including MP4, M3A, AIFF, WAV, FLAC, OGG, and WMA.

Key Features

• Metadatics can handle your problems with a large number of editing. It can quickly and easily edit a batch of up to 10,000 files.
• It allows you to rename your files. Along with that, it can generate directory structures depending on the file’s metadata.
• Metadatics has support for images and artwork. Artwork can be extracted from the files and saved as a separate image.

3. MetaBliss

Moving on, let’s talk about MetaBliss, ID3 tag editor. This editor is specifically for macOS X users that allows fast and quick editing of MP3 tags where you can change the comments, artist, song name, or whatever you like. This Mac MP3 tag editor is known for its performance, and hence, it can fix and edit hundreds of files at once without any trouble.

Key Features

• This tag editor provides easy search and easy replacement of words in tags. It is powerful enough to handle and edit multiple tags simultaneously.
• If you have any old tags as ID3v1, MetaBliss will remove them because they are now obsolete and useless.
• Do extra spaces annoy you? Try MetaBliss; it also features to remove extra spaces within the tags. Moreover, copying tags is very easy; you just have to drag them down.

4. Amvidia

Amvidia is a very famous macOS MP3 tag editor. Do you know the best part about Amvidia? You can edit over 60 types of tags with this editor for your videos. Amvidia MP3 tag editor works like magic as it can rename multiple files together. In addition to this, the editor also supports managing artworks.

Key Features

• The best thing about using Amvidia is its compatibility. The MP3 tag editor is fully compatible and works perfectly with all Mac operating system versions.
• Amvidia allows you to find and replace the texts and numbers. Moreover, this editor can also load tags from paths like Music or iTunes.
• This tag editor is magical as it can clean all the wrong encodings of the tags. Additionally, it removes all the extra spaces and characters.

5. MusicBrainz Picard

Picard is an editing tool developed by MusicBrainz. It is a cross-platform music tagger that is written in Python. Picard is mainly used by Mac users but can be used on any platform. It is an open-source editing tool that is licensed under GPL 2.0 or later.

It is hosted on GitHub. Picard is used for its efficiency, and it can look after entire music CDs with a single click quickly.

Key Features

• Picard has a variety of plug-in support. If you need anything, you can look into the available plug-in, or even you can write your own.
• It uses AcoustID audio fingerprints. This makes them identifiable by actual audio even there is no metadata available for the particular file.
• Picard supports all the popular formats that are used. These formats include MP3, M4A, FLAC, WMA, OGG, WAV, and many more.

Bottom Line

The article solely focused on sharing and discussing Mac MP3 tag editors. We hope that this article proves helpful for you. Let’s also talk a little about Wondershare Filmora Video Editor , the platform that has made editing easy.

You just name a feature, and Filmora will already have it. The editor offers Basic options like merge, split, cut, trim, etc. If we talk about Advanced options, you get AI Portrait, Normalization, Stabilize Video, Auto Reframe, and much more than this.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 5 Recommended Mac MP3 Tag Editor

Part 1. What Need to Be Considered Before Choosing a Mac MP3 Tag Editor

Have you ever looked at the internet and the number of options you get whenever you search for MP3 tag editor Mac free? The page is all packed and loaded with tons of different options. No doubt it’s tough to select a good tag editor, but what if we tell you some tricks for selecting a great Mac music tag editor? Without any further delay, let’s begin.

· Easy to User Interface

A primary factor that is considered while selecting any tool, the editor, is its interface. If any software offers a complex interface, users don’t prefer it. An easy interface means all the editing, manipulating, adding, deleting options appear on the front. Users don’t have to struggle to find basic options.

· Online Database Search

If any macOS MP3 tag editor offers an online database search means it’s a good editor. This is because not all editors support online search. The option is very helpful as the online search shares all the information related to any searched tag.

· Editing Options

How many editing options do you prefer? Editing metadata means that you should be able to edit and manipulate as many fields as possible. For instance, the Mac music tag editor should allow changing the singer’s name, year tag, and all the other fields.

· Batch Processing

Editing is a stressful and hectic job. Is there a way to help yourself? Let’s share about Batch Processing. If the Mac MP3 tag editor allows batch processing, then it’s a great choice. This is because editing individually can take hours, but batch processing reduces the editing time as well as the editing efforts.

· Supported Formats

How many formats can your Mac music tag editor support? Although all the tools are MP3 tag editors, not all audio files have MP3 format. For this reason, always select the tag editor that can support and edit different files formats.

Part 2. 5 Recommended Mac MP3 Tag Editor

After talking about the options to consider before selecting any macOS MP3 tag editor, it’s the perfect time to share some tag editors with all the Mac users. So, let’s talk about the 5 best tag editors without any further delay.

1. Wondershare UniConverter

Wondershare UniConverter is a great choice as a Mac MP3 tag editor. This software can be used for multiple purposes. UniConverter is amazing as it can download and record files from various sites. An extra thing, Wondershare UniConverter can also convert files to different formats.

Key Features

• The most important thing, UniConverter supports searching from online databases. You just have to type the information in the search bar.
• For fixing or editing the Metadata, head to the ‘Fix Media Metadata’ tab from the main screen so that you can manipulate the information.
• UniConverter offers a long list of options that you can amend, for instance, song name, artist, year, track number, and whatnot.

2. Metadatics

Metadatics is an audio metadata editor. It is developed by ‘Mark V.’ Metadatics is specially made for Mac OS X. Being powerful is not the description for Metadatics. It is an advanced-level editing tool for metadata editing. Metadatics allow multiple formats to be edited, including MP4, M3A, AIFF, WAV, FLAC, OGG, and WMA.

Key Features

• Metadatics can handle your problems with a large number of editing. It can quickly and easily edit a batch of up to 10,000 files.
• It allows you to rename your files. Along with that, it can generate directory structures depending on the file’s metadata.
• Metadatics has support for images and artwork. Artwork can be extracted from the files and saved as a separate image.

3. MetaBliss

Moving on, let’s talk about MetaBliss, ID3 tag editor. This editor is specifically for macOS X users that allows fast and quick editing of MP3 tags where you can change the comments, artist, song name, or whatever you like. This Mac MP3 tag editor is known for its performance, and hence, it can fix and edit hundreds of files at once without any trouble.

Key Features

• This tag editor provides easy search and easy replacement of words in tags. It is powerful enough to handle and edit multiple tags simultaneously.
• If you have any old tags as ID3v1, MetaBliss will remove them because they are now obsolete and useless.
• Do extra spaces annoy you? Try MetaBliss; it also features to remove extra spaces within the tags. Moreover, copying tags is very easy; you just have to drag them down.

4. Amvidia

Amvidia is a very famous macOS MP3 tag editor. Do you know the best part about Amvidia? You can edit over 60 types of tags with this editor for your videos. Amvidia MP3 tag editor works like magic as it can rename multiple files together. In addition to this, the editor also supports managing artworks.

Key Features

• The best thing about using Amvidia is its compatibility. The MP3 tag editor is fully compatible and works perfectly with all Mac operating system versions.
• Amvidia allows you to find and replace the texts and numbers. Moreover, this editor can also load tags from paths like Music or iTunes.
• This tag editor is magical as it can clean all the wrong encodings of the tags. Additionally, it removes all the extra spaces and characters.

5. MusicBrainz Picard

Picard is an editing tool developed by MusicBrainz. It is a cross-platform music tagger that is written in Python. Picard is mainly used by Mac users but can be used on any platform. It is an open-source editing tool that is licensed under GPL 2.0 or later.

It is hosted on GitHub. Picard is used for its efficiency, and it can look after entire music CDs with a single click quickly.

Key Features

• Picard has a variety of plug-in support. If you need anything, you can look into the available plug-in, or even you can write your own.
• It uses AcoustID audio fingerprints. This makes them identifiable by actual audio even there is no metadata available for the particular file.
• Picard supports all the popular formats that are used. These formats include MP3, M4A, FLAC, WMA, OGG, WAV, and many more.

Bottom Line

The article solely focused on sharing and discussing Mac MP3 tag editors. We hope that this article proves helpful for you. Let’s also talk a little about Wondershare Filmora Video Editor , the platform that has made editing easy.

You just name a feature, and Filmora will already have it. The editor offers Basic options like merge, split, cut, trim, etc. If we talk about Advanced options, you get AI Portrait, Normalization, Stabilize Video, Auto Reframe, and much more than this.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Also read: