“Critical Picks: The 5 Most Accessible Harmonics Adjuster Tools”

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Innovative Methodologies for Embedding Musicality Within Instagram TV Experiences

People are putting lots of effort into creating videos and sharing them on IGTV to get fame. Due to it, they also want to figure out how to add music to IGTV to create impressive videos. For all these things, the interested ones have to consider some video editors. In this blog, you will get complete information about these factors.

In this article

01 [3 Ways To Add Music To IGTV On Android & iOS](#Part 1)

02 [2 Ways To Add Music To IGTV On Windows & Mac](#Part 2)

03 [How To Add Music To IGTV Without Copyright?](#Part 3)

04 [How To Post Your Video To IGTV?](#Part 4)

Part 1 3 Ways To Add Music To IGTV On Android & iOS

Most individuals are using mobile devices for Instagram and IGTV purposes. Similarly, they are looking for the best video editors by which they can edit videos and prepare impressive content for IGTV uploads. If you are one of these, the following are some major apps for Android and iOS.

Filmora

Videoshop

Videoshop is considered by numerous individuals. Mainly, this video editor is beneficial in adding audio to the video’s background. It can be used for both Android and iOS mobile devices. It is available with some basic editing features.

Prequel

In case you want to add music to IGTV, Prequel can be a good option as well. It also available for both types of devices Android and iOS. By using this particular application, you can add effects, text, do editing, and alter videos.

Part 2 2 Ways To Add Music To IGTV On Windows & Mac

Filmora

Filmora is one of the best video editors for Windows & Mac. It is almost similar to the mobile version (Filmora). In case you want to use it, you should follow below mentioned procedure.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Step1

Firstly, you should import video and audio files to the Filmora. For importing files, it should be available on the device.

Step2

Now, you need to add audio to the video. Filmora also has a big music library with lots of free files. You can pick sound effects from here to create an impressive video. By using audio keyframing features, you can also make changes to the files.

Step3

After all these things, you can proceed by saving the changes and exporting the available file.

Final Cut Pro

Final Cut Pro is a video editor that is mainly considered by professionals only. The biggest thing about this particular editor is, the tool is available for Mac devices only. It has a good and easy-to-understand interface with lots of features. But, you cannot ignore the fact that it is too expensive so everyone cannot consider its services.

Part 3 How To Add Music To IGTV Without Copyright?

In the case of the online system, copyright problems are taking place several times. It is the main reason why some publishers cannot post their content or get their videos removed by force. Due to all these things, many individuals are interested in figuring out the best ways that can be useful in avoiding copyright issues by uploading a music file with video.

Here, you can find out some basic things. Firstly, you should be careful with the copyright rules. If you want to add music to IGTV video, you should check out the music file and its all types of copyrights first. This inspection will help you figure out lots of things, such as – the current legal condition of the file. There are numerous free music files also available on the internet.

You can use these files in your videos as you want. While using these ones, you will never face any kind of copyright problem. For getting such kinds of audio files, you can get help from third-party sources on the internet. These websites are offering royalty-free music files. Another major way is contacting the copyright holder and getting his or her permission to use the file.

Part 4 How To Post Your Video To IGTV?

Everyone does not have expertise in using the IGTV. It is the main reason why they are looking for a proper guide in some major steps, such as -the best way to post a video on IGTV. Before that, you should get clarity that the process will be a little bit different for mobile and desktop. You should follow the procedure according to the device you are using. In the upcoming details, you can get a step-by-step guide for both types of devices.

For Mobile – Step-By-Step Guide

Step1

Firstly, you should proceed by accessing the mobile application of Instagram. After opening the application, you should pay attention to the top-right section of feeds. Here, you can see the IGTV symbol. In case you want direct access, you can also download the IGTV application separately.

Step2

After accessing the IGTV, you will get a different interface. Here, you can see the “+” button. When you click the button, it will open your video gallery. You can pick the video, you want to upload on the IGTV feeds.

Step3

When you successfully choose a video, you should be focused on choosing an image that will be used as the cover. When choosing an image or video scene for cover, you need to be smart and careful. Try to keep it interesting and eye-catching, so people would like to watch it.

Step4

The addition of cover images will complete media-related options. Now, you should proceed with the ‘NEXT’ button. It will take you to the title and description page. You should put an interesting title and description to showcase the right data about the video.

Step5

Now, you have to finalize everything. Before posting the video, you will get an option with a notification. If you click the ‘yes’ button, it will help you preview the video and figure out everything is perfect or not. In case you consider the ‘no’ button, it will eliminate the preview and proceed to publish the video. Within a few minutes, your video will be posted on IGTV and visible to the audience.

For Desktop – Step-By-Step Guide

Step1

Firstly, you need to proceed by opening Instagram on a desktop, no matter Windows or Mac. Here, you should log in to Instagram Web by using credentials. You should log in account by using the official sources only. Don’t fall for fake websites or scammers.

Step2

Now, you should access your account profile. Here, you can see multiple buttons in the interface. You should proceed by choosing the ‘IGTV’ button. You can see this button between the ‘post’ and ‘saved’ buttons.

Step3

In the IGTV interface, you can see the ‘upload’ button as well. Clicking this particular button will allow you to access the video upload interface and procedure.

Step4

The video that you want to upload on IGTV should be available on your device. By using the interface, you can access device storage and upload the desired video.

Step5

You can also upload the video by using drag and drop features. After adding the video, you should proceed with the addition of the title and description. In case you also want to target the Facebook audience, you can make it visible there as well. For such a task, you can see a specific button that will allow you to do that as well.

These are basic procedures to upload videos on IGTV. After completing the procedure, you need to wait for a few minutes only. Here, the video uploading procedure will take time as per your internet speed and connection quality.

Final Words

After all these things, you can easily figure out how to add music to IGTV video and the best methods to use IGTV. Along with it, you can understand what methods can help you get audio files by avoiding copyright problems. The most important thing is content. In case you don’t upload creative content, it will not please your audience. You should be using the best tools to create video content for sharing on IGTV. The best content will entertain your audience and provide better recognition as well. In case you are using mobile platforms, it will be good to consider Filmora and for desktops, Filmora works great. You should be smart and careful while making a final decision.

02 [2 Ways To Add Music To IGTV On Windows & Mac](#Part 2)

03 [How To Add Music To IGTV Without Copyright?](#Part 3)

04 [How To Post Your Video To IGTV?](#Part 4)

Part 1 3 Ways To Add Music To IGTV On Android & iOS

Most individuals are using mobile devices for Instagram and IGTV purposes. Similarly, they are looking for the best video editors by which they can edit videos and prepare impressive content for IGTV uploads. If you are one of these, the following are some major apps for Android and iOS.

Filmora

Videoshop

Videoshop is considered by numerous individuals. Mainly, this video editor is beneficial in adding audio to the video’s background. It can be used for both Android and iOS mobile devices. It is available with some basic editing features.

Prequel

In case you want to add music to IGTV, Prequel can be a good option as well. It also available for both types of devices Android and iOS. By using this particular application, you can add effects, text, do editing, and alter videos.

Part 2 2 Ways To Add Music To IGTV On Windows & Mac

Filmora

Filmora is one of the best video editors for Windows & Mac. It is almost similar to the mobile version (Filmora). In case you want to use it, you should follow below mentioned procedure.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Step1

Firstly, you should import video and audio files to the Filmora. For importing files, it should be available on the device.

Step2

Now, you need to add audio to the video. Filmora also has a big music library with lots of free files. You can pick sound effects from here to create an impressive video. By using audio keyframing features, you can also make changes to the files.

Step3

After all these things, you can proceed by saving the changes and exporting the available file.

Final Cut Pro

Final Cut Pro is a video editor that is mainly considered by professionals only. The biggest thing about this particular editor is, the tool is available for Mac devices only. It has a good and easy-to-understand interface with lots of features. But, you cannot ignore the fact that it is too expensive so everyone cannot consider its services.

Part 3 How To Add Music To IGTV Without Copyright?

In the case of the online system, copyright problems are taking place several times. It is the main reason why some publishers cannot post their content or get their videos removed by force. Due to all these things, many individuals are interested in figuring out the best ways that can be useful in avoiding copyright issues by uploading a music file with video.

Here, you can find out some basic things. Firstly, you should be careful with the copyright rules. If you want to add music to IGTV video, you should check out the music file and its all types of copyrights first. This inspection will help you figure out lots of things, such as – the current legal condition of the file. There are numerous free music files also available on the internet.

You can use these files in your videos as you want. While using these ones, you will never face any kind of copyright problem. For getting such kinds of audio files, you can get help from third-party sources on the internet. These websites are offering royalty-free music files. Another major way is contacting the copyright holder and getting his or her permission to use the file.

Part 4 How To Post Your Video To IGTV?

Everyone does not have expertise in using the IGTV. It is the main reason why they are looking for a proper guide in some major steps, such as -the best way to post a video on IGTV. Before that, you should get clarity that the process will be a little bit different for mobile and desktop. You should follow the procedure according to the device you are using. In the upcoming details, you can get a step-by-step guide for both types of devices.

For Mobile – Step-By-Step Guide

Step1

Firstly, you should proceed by accessing the mobile application of Instagram. After opening the application, you should pay attention to the top-right section of feeds. Here, you can see the IGTV symbol. In case you want direct access, you can also download the IGTV application separately.

Step2

After accessing the IGTV, you will get a different interface. Here, you can see the “+” button. When you click the button, it will open your video gallery. You can pick the video, you want to upload on the IGTV feeds.

Step3

When you successfully choose a video, you should be focused on choosing an image that will be used as the cover. When choosing an image or video scene for cover, you need to be smart and careful. Try to keep it interesting and eye-catching, so people would like to watch it.

Step4

The addition of cover images will complete media-related options. Now, you should proceed with the ‘NEXT’ button. It will take you to the title and description page. You should put an interesting title and description to showcase the right data about the video.

Step5

Now, you have to finalize everything. Before posting the video, you will get an option with a notification. If you click the ‘yes’ button, it will help you preview the video and figure out everything is perfect or not. In case you consider the ‘no’ button, it will eliminate the preview and proceed to publish the video. Within a few minutes, your video will be posted on IGTV and visible to the audience.

For Desktop – Step-By-Step Guide

Step1

Firstly, you need to proceed by opening Instagram on a desktop, no matter Windows or Mac. Here, you should log in to Instagram Web by using credentials. You should log in account by using the official sources only. Don’t fall for fake websites or scammers.

Step2

Now, you should access your account profile. Here, you can see multiple buttons in the interface. You should proceed by choosing the ‘IGTV’ button. You can see this button between the ‘post’ and ‘saved’ buttons.

Step3

In the IGTV interface, you can see the ‘upload’ button as well. Clicking this particular button will allow you to access the video upload interface and procedure.

Step4

The video that you want to upload on IGTV should be available on your device. By using the interface, you can access device storage and upload the desired video.

Step5

You can also upload the video by using drag and drop features. After adding the video, you should proceed with the addition of the title and description. In case you also want to target the Facebook audience, you can make it visible there as well. For such a task, you can see a specific button that will allow you to do that as well.

These are basic procedures to upload videos on IGTV. After completing the procedure, you need to wait for a few minutes only. Here, the video uploading procedure will take time as per your internet speed and connection quality.

Final Words

After all these things, you can easily figure out how to add music to IGTV video and the best methods to use IGTV. Along with it, you can understand what methods can help you get audio files by avoiding copyright problems. The most important thing is content. In case you don’t upload creative content, it will not please your audience. You should be using the best tools to create video content for sharing on IGTV. The best content will entertain your audience and provide better recognition as well. In case you are using mobile platforms, it will be good to consider Filmora and for desktops, Filmora works great. You should be smart and careful while making a final decision.

02 [2 Ways To Add Music To IGTV On Windows & Mac](#Part 2)

03 [How To Add Music To IGTV Without Copyright?](#Part 3)

04 [How To Post Your Video To IGTV?](#Part 4)

Part 1 3 Ways To Add Music To IGTV On Android & iOS

Most individuals are using mobile devices for Instagram and IGTV purposes. Similarly, they are looking for the best video editors by which they can edit videos and prepare impressive content for IGTV uploads. If you are one of these, the following are some major apps for Android and iOS.

Filmora

Videoshop

Videoshop is considered by numerous individuals. Mainly, this video editor is beneficial in adding audio to the video’s background. It can be used for both Android and iOS mobile devices. It is available with some basic editing features.

Prequel

In case you want to add music to IGTV, Prequel can be a good option as well. It also available for both types of devices Android and iOS. By using this particular application, you can add effects, text, do editing, and alter videos.

Part 2 2 Ways To Add Music To IGTV On Windows & Mac

Filmora

Filmora is one of the best video editors for Windows & Mac. It is almost similar to the mobile version (Filmora). In case you want to use it, you should follow below mentioned procedure.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Step1

Firstly, you should import video and audio files to the Filmora. For importing files, it should be available on the device.

Step2

Now, you need to add audio to the video. Filmora also has a big music library with lots of free files. You can pick sound effects from here to create an impressive video. By using audio keyframing features, you can also make changes to the files.

Step3

After all these things, you can proceed by saving the changes and exporting the available file.

Final Cut Pro

Final Cut Pro is a video editor that is mainly considered by professionals only. The biggest thing about this particular editor is, the tool is available for Mac devices only. It has a good and easy-to-understand interface with lots of features. But, you cannot ignore the fact that it is too expensive so everyone cannot consider its services.

Part 3 How To Add Music To IGTV Without Copyright?

In the case of the online system, copyright problems are taking place several times. It is the main reason why some publishers cannot post their content or get their videos removed by force. Due to all these things, many individuals are interested in figuring out the best ways that can be useful in avoiding copyright issues by uploading a music file with video.

Here, you can find out some basic things. Firstly, you should be careful with the copyright rules. If you want to add music to IGTV video, you should check out the music file and its all types of copyrights first. This inspection will help you figure out lots of things, such as – the current legal condition of the file. There are numerous free music files also available on the internet.

You can use these files in your videos as you want. While using these ones, you will never face any kind of copyright problem. For getting such kinds of audio files, you can get help from third-party sources on the internet. These websites are offering royalty-free music files. Another major way is contacting the copyright holder and getting his or her permission to use the file.

Part 4 How To Post Your Video To IGTV?

Everyone does not have expertise in using the IGTV. It is the main reason why they are looking for a proper guide in some major steps, such as -the best way to post a video on IGTV. Before that, you should get clarity that the process will be a little bit different for mobile and desktop. You should follow the procedure according to the device you are using. In the upcoming details, you can get a step-by-step guide for both types of devices.

For Mobile – Step-By-Step Guide

Step1

Firstly, you should proceed by accessing the mobile application of Instagram. After opening the application, you should pay attention to the top-right section of feeds. Here, you can see the IGTV symbol. In case you want direct access, you can also download the IGTV application separately.

Step2

After accessing the IGTV, you will get a different interface. Here, you can see the “+” button. When you click the button, it will open your video gallery. You can pick the video, you want to upload on the IGTV feeds.

Step3

When you successfully choose a video, you should be focused on choosing an image that will be used as the cover. When choosing an image or video scene for cover, you need to be smart and careful. Try to keep it interesting and eye-catching, so people would like to watch it.

Step4

The addition of cover images will complete media-related options. Now, you should proceed with the ‘NEXT’ button. It will take you to the title and description page. You should put an interesting title and description to showcase the right data about the video.

Step5

Now, you have to finalize everything. Before posting the video, you will get an option with a notification. If you click the ‘yes’ button, it will help you preview the video and figure out everything is perfect or not. In case you consider the ‘no’ button, it will eliminate the preview and proceed to publish the video. Within a few minutes, your video will be posted on IGTV and visible to the audience.

For Desktop – Step-By-Step Guide

Step1

Firstly, you need to proceed by opening Instagram on a desktop, no matter Windows or Mac. Here, you should log in to Instagram Web by using credentials. You should log in account by using the official sources only. Don’t fall for fake websites or scammers.

Step2

Now, you should access your account profile. Here, you can see multiple buttons in the interface. You should proceed by choosing the ‘IGTV’ button. You can see this button between the ‘post’ and ‘saved’ buttons.

Step3

In the IGTV interface, you can see the ‘upload’ button as well. Clicking this particular button will allow you to access the video upload interface and procedure.

Step4

The video that you want to upload on IGTV should be available on your device. By using the interface, you can access device storage and upload the desired video.

Step5

You can also upload the video by using drag and drop features. After adding the video, you should proceed with the addition of the title and description. In case you also want to target the Facebook audience, you can make it visible there as well. For such a task, you can see a specific button that will allow you to do that as well.

These are basic procedures to upload videos on IGTV. After completing the procedure, you need to wait for a few minutes only. Here, the video uploading procedure will take time as per your internet speed and connection quality.

Final Words

After all these things, you can easily figure out how to add music to IGTV video and the best methods to use IGTV. Along with it, you can understand what methods can help you get audio files by avoiding copyright problems. The most important thing is content. In case you don’t upload creative content, it will not please your audience. You should be using the best tools to create video content for sharing on IGTV. The best content will entertain your audience and provide better recognition as well. In case you are using mobile platforms, it will be good to consider Filmora and for desktops, Filmora works great. You should be smart and careful while making a final decision.

02 [2 Ways To Add Music To IGTV On Windows & Mac](#Part 2)

03 [How To Add Music To IGTV Without Copyright?](#Part 3)

04 [How To Post Your Video To IGTV?](#Part 4)

Part 1 3 Ways To Add Music To IGTV On Android & iOS

Most individuals are using mobile devices for Instagram and IGTV purposes. Similarly, they are looking for the best video editors by which they can edit videos and prepare impressive content for IGTV uploads. If you are one of these, the following are some major apps for Android and iOS.

Filmora

Videoshop

Videoshop is considered by numerous individuals. Mainly, this video editor is beneficial in adding audio to the video’s background. It can be used for both Android and iOS mobile devices. It is available with some basic editing features.

Prequel

In case you want to add music to IGTV, Prequel can be a good option as well. It also available for both types of devices Android and iOS. By using this particular application, you can add effects, text, do editing, and alter videos.

Part 2 2 Ways To Add Music To IGTV On Windows & Mac

Filmora

Filmora is one of the best video editors for Windows & Mac. It is almost similar to the mobile version (Filmora). In case you want to use it, you should follow below mentioned procedure.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Step1

Firstly, you should import video and audio files to the Filmora. For importing files, it should be available on the device.

Step2

Now, you need to add audio to the video. Filmora also has a big music library with lots of free files. You can pick sound effects from here to create an impressive video. By using audio keyframing features, you can also make changes to the files.

Step3

After all these things, you can proceed by saving the changes and exporting the available file.

Final Cut Pro

Final Cut Pro is a video editor that is mainly considered by professionals only. The biggest thing about this particular editor is, the tool is available for Mac devices only. It has a good and easy-to-understand interface with lots of features. But, you cannot ignore the fact that it is too expensive so everyone cannot consider its services.

Part 3 How To Add Music To IGTV Without Copyright?

In the case of the online system, copyright problems are taking place several times. It is the main reason why some publishers cannot post their content or get their videos removed by force. Due to all these things, many individuals are interested in figuring out the best ways that can be useful in avoiding copyright issues by uploading a music file with video.

Here, you can find out some basic things. Firstly, you should be careful with the copyright rules. If you want to add music to IGTV video, you should check out the music file and its all types of copyrights first. This inspection will help you figure out lots of things, such as – the current legal condition of the file. There are numerous free music files also available on the internet.

You can use these files in your videos as you want. While using these ones, you will never face any kind of copyright problem. For getting such kinds of audio files, you can get help from third-party sources on the internet. These websites are offering royalty-free music files. Another major way is contacting the copyright holder and getting his or her permission to use the file.

Part 4 How To Post Your Video To IGTV?

Everyone does not have expertise in using the IGTV. It is the main reason why they are looking for a proper guide in some major steps, such as -the best way to post a video on IGTV. Before that, you should get clarity that the process will be a little bit different for mobile and desktop. You should follow the procedure according to the device you are using. In the upcoming details, you can get a step-by-step guide for both types of devices.

For Mobile – Step-By-Step Guide

Step1

Firstly, you should proceed by accessing the mobile application of Instagram. After opening the application, you should pay attention to the top-right section of feeds. Here, you can see the IGTV symbol. In case you want direct access, you can also download the IGTV application separately.

Step2

After accessing the IGTV, you will get a different interface. Here, you can see the “+” button. When you click the button, it will open your video gallery. You can pick the video, you want to upload on the IGTV feeds.

Step3

When you successfully choose a video, you should be focused on choosing an image that will be used as the cover. When choosing an image or video scene for cover, you need to be smart and careful. Try to keep it interesting and eye-catching, so people would like to watch it.

Step4

The addition of cover images will complete media-related options. Now, you should proceed with the ‘NEXT’ button. It will take you to the title and description page. You should put an interesting title and description to showcase the right data about the video.

Step5

Now, you have to finalize everything. Before posting the video, you will get an option with a notification. If you click the ‘yes’ button, it will help you preview the video and figure out everything is perfect or not. In case you consider the ‘no’ button, it will eliminate the preview and proceed to publish the video. Within a few minutes, your video will be posted on IGTV and visible to the audience.

For Desktop – Step-By-Step Guide

Step1

Firstly, you need to proceed by opening Instagram on a desktop, no matter Windows or Mac. Here, you should log in to Instagram Web by using credentials. You should log in account by using the official sources only. Don’t fall for fake websites or scammers.

Step2

Now, you should access your account profile. Here, you can see multiple buttons in the interface. You should proceed by choosing the ‘IGTV’ button. You can see this button between the ‘post’ and ‘saved’ buttons.

Step3

In the IGTV interface, you can see the ‘upload’ button as well. Clicking this particular button will allow you to access the video upload interface and procedure.

Step4

The video that you want to upload on IGTV should be available on your device. By using the interface, you can access device storage and upload the desired video.

Step5

You can also upload the video by using drag and drop features. After adding the video, you should proceed with the addition of the title and description. In case you also want to target the Facebook audience, you can make it visible there as well. For such a task, you can see a specific button that will allow you to do that as well.

These are basic procedures to upload videos on IGTV. After completing the procedure, you need to wait for a few minutes only. Here, the video uploading procedure will take time as per your internet speed and connection quality.

Final Words

After all these things, you can easily figure out how to add music to IGTV video and the best methods to use IGTV. Along with it, you can understand what methods can help you get audio files by avoiding copyright problems. The most important thing is content. In case you don’t upload creative content, it will not please your audience. You should be using the best tools to create video content for sharing on IGTV. The best content will entertain your audience and provide better recognition as well. In case you are using mobile platforms, it will be good to consider Filmora and for desktops, Filmora works great. You should be smart and careful while making a final decision.

The Art of Accompaniment: Crafting a Harmonious Blend Between Video and Music

The audio or music of video can dramatically affect our perception of a video – no matter whether it’s a home movie, a commercial, or a video presentation. But what if all you have is silent footage or with just a crackled and distorted audio file that needs to be replaced, and at this time, you want to add a sound to the video?

To solve this problem, I humbly recommend Wondershare Filmora . With it, you can easily add audio to video, record the voiceover directly and add it to video, or replace the original audio track (stream) with a new audio file.

In case you want to add music to video with some online tools, please leave a comment below so I can test some online solutions and share with you the best online tools to add audio to video free. I recommend Filmora because its requirement on the network isn’t so high compared to the online tools.

Below is a creative way of adding sound effects to video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Also read: