Step-by-Step: Splitting Audio and Visuals in iMovie Using a Mac

How to Separate Audio from Video in iMovie on Mac?

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Top 5 Ultimate Free Audio Level Regulator

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Incorporate Audio Files Into Final Cut Studio

Everyone does not have expertise in using the Final Cut Pro. Some are beginners and completely new to the tool. These are always looking for proper support and want to know how to add music to final cut pro. In case you are one of these individuals, you should be focused on proper procedure and follow it step-by-step. In the upcoming paragraphs, you will get complete information about it.

In this article

01 [Add Music To Final Cut Pro](#Part 1)

02 [Alternative For Final Cut Pro To Add Music To Video](#Part 2)

Part 1 Add Music To Final Cut Pro

Are you interested to figure out the best possible method to add music files to Final Cut Pro for video creation and other purposes? If you are looking for such an option, you should be focused on the following process.

Step1 Access Final Cut Pro

Firstly, you should focus on accessing the Final Cut Pro. You should check out the application on your desktop and open it.

Step2 Go To File

After accessing the Final Cut Pro, you can see multiple options and menus on the interface. Here, you should navigate to the ‘FILE’ option. You can find out this particular option on the top of the navigation bar.

Step3 Access File

Now, you should access the FILE button. It will lead to a fully-featured menu with multiple options. You should find out the IMPORT button and proceed.

Step4 Import Button

When you click on the IMPORT button, it will provide some choices. You should go with the option of MEDIA.

Step5 Locate File

After clicking the media button, it will present a complete file and storage interface in front of you. You should find out the audio file on your device by using such an interface. Here, you need to access the targeted folder only. You should select the audio file and hit the IMPORT button. It will bring your desired audio file to the Final Cut Pro easily for further usage.

Step6 Add Audio to Video

Once you get the audio file to the library of Final Cut Pro, after that, you should proceed by arranging it as per the video sequence and requirements. You should take the video timeline carefully and make all edits smartly. Here, you will find out drag and drop features are highly beneficial. It will help you synchronize the audio and video with ease.

It is the complete process by which you can easily add music to final cut pro. With it, you also have the option of accessing its built-in music library. By using this particular library, you can get multiple audio files with sound effects, songs, etc. You can access these files to add to the video as well. In case you don’t find something relevant to the content, you can consider the option of importing your own as per the procedure.

Part 2 Alternative For Final Cut Pro To Add Music To Video

No one can ignore the features and functionalities of Final Cut Pro. But, sometimes people don’t find it suitable or appropriate as per their video editing requirements. It is the main reason why they start looking for some alternatives that can help them in getting better results with top-notch edits.

Filmora

All individuals are not working as professional video editors or designers. Due to it, they lack technical knowledge and are also unaware of the tool’s interfaces and their usability. As a result, they start facing lots of problems with complicated tools. In case you want to access a video editor with a user-friendly interface that can be helpful in creating content easily, you can consider Filmora. It is the easiest video editor to use that can be useful in creating and editing videos with ease.

Both Windows and Mac users can access Filmora by downloading software on the system. On the other hand, Final Cut Pro is available only for the Mac.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Benefits

User-friendly interface

A big music library

Available for mobile platforms as well (Filmora)

Regular updates for features and functionalities

Drawbacks

Less audio editing features

By paying attention to these aspects, you can easily understand how important and useful Filmora is. It is also having some audio editing features. It will allow you to make changes in audio files as per the requirements and keep it perfect according to the video.

Premiere Pro

Premiere Pro is not new in the market. It is an old and famous editing tool. But, the main fact about this particular source is its usability. Everyone cannot consider the option of this particular video editor. There are multiple reasons behind it. Some people may find the tool difficult to use.

For some individuals, its charges are too high. Actually, Premiere Pro is paid source. Its plans are also too expensive. If you consider its option, you have two choices bill monthly or annually. In case you choose monthly billing, you will need to pay around $31.49 per month. Annual billing will help you save some money and it costs an average of $20.99 per month.

Benefits

Regular updates

Templates, plugins, and preset options available

Drawbacks

Too Expensive

Complicated

Premiere Pro is a complicated tool to use. It is mainly made for the professionals who master these types of skills and work on big projects. If a beginner tries to access it, they may find it irrelevant and hard to understand. It takes lots of time to process and complete some basic things as well.

CyberLink PowerDirector

It is also a paid option to consider. If you choose to use CyberLink PowerDirector for the first time, you can avail of its free trial services as well. It provides a free trial of 30 days that can help you access the tool’s capability and figure out it is worth buying or not. The following are some benefits and drawbacks of choosing this particular option.

Benefits

Regular updates

Multiple features

Drawbacks

Lack of color tools

CyberLink PowerDirector is a suitable option for video editing professionals with mid-level skills. Highly skilled individuals can consider its option but they may find it easy to use and don’t get some advanced feature as per their skill set.

Conclusion

By paying attention to all these details, you can easily figure out the best final cut pro add music method. It depends on your choice that you want to use some existing audio file or want to import your own. Along with it, you can also check out some alternatives that can help you figure out what kind of tools can be considered over Final Cut Pro for better results. Filmora holds the top-notch position with lots of features, functionalities, and complete accessibilities. You need to be smart while making a final decision regarding video editor selection for creating top-notch video content to entertain the audience perfectly.

02 [Alternative For Final Cut Pro To Add Music To Video](#Part 2)

Part 1 Add Music To Final Cut Pro

Are you interested to figure out the best possible method to add music files to Final Cut Pro for video creation and other purposes? If you are looking for such an option, you should be focused on the following process.

Step1 Access Final Cut Pro

Firstly, you should focus on accessing the Final Cut Pro. You should check out the application on your desktop and open it.

Step2 Go To File

After accessing the Final Cut Pro, you can see multiple options and menus on the interface. Here, you should navigate to the ‘FILE’ option. You can find out this particular option on the top of the navigation bar.

Step3 Access File

Now, you should access the FILE button. It will lead to a fully-featured menu with multiple options. You should find out the IMPORT button and proceed.

Step4 Import Button

When you click on the IMPORT button, it will provide some choices. You should go with the option of MEDIA.

Step5 Locate File

After clicking the media button, it will present a complete file and storage interface in front of you. You should find out the audio file on your device by using such an interface. Here, you need to access the targeted folder only. You should select the audio file and hit the IMPORT button. It will bring your desired audio file to the Final Cut Pro easily for further usage.

Step6 Add Audio to Video

Once you get the audio file to the library of Final Cut Pro, after that, you should proceed by arranging it as per the video sequence and requirements. You should take the video timeline carefully and make all edits smartly. Here, you will find out drag and drop features are highly beneficial. It will help you synchronize the audio and video with ease.

It is the complete process by which you can easily add music to final cut pro. With it, you also have the option of accessing its built-in music library. By using this particular library, you can get multiple audio files with sound effects, songs, etc. You can access these files to add to the video as well. In case you don’t find something relevant to the content, you can consider the option of importing your own as per the procedure.

Part 2 Alternative For Final Cut Pro To Add Music To Video

No one can ignore the features and functionalities of Final Cut Pro. But, sometimes people don’t find it suitable or appropriate as per their video editing requirements. It is the main reason why they start looking for some alternatives that can help them in getting better results with top-notch edits.

Filmora

All individuals are not working as professional video editors or designers. Due to it, they lack technical knowledge and are also unaware of the tool’s interfaces and their usability. As a result, they start facing lots of problems with complicated tools. In case you want to access a video editor with a user-friendly interface that can be helpful in creating content easily, you can consider Filmora. It is the easiest video editor to use that can be useful in creating and editing videos with ease.

Both Windows and Mac users can access Filmora by downloading software on the system. On the other hand, Final Cut Pro is available only for the Mac.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Benefits

User-friendly interface

A big music library

Available for mobile platforms as well (Filmora)

Regular updates for features and functionalities

Drawbacks

Less audio editing features

By paying attention to these aspects, you can easily understand how important and useful Filmora is. It is also having some audio editing features. It will allow you to make changes in audio files as per the requirements and keep it perfect according to the video.

Premiere Pro

Premiere Pro is not new in the market. It is an old and famous editing tool. But, the main fact about this particular source is its usability. Everyone cannot consider the option of this particular video editor. There are multiple reasons behind it. Some people may find the tool difficult to use.

For some individuals, its charges are too high. Actually, Premiere Pro is paid source. Its plans are also too expensive. If you consider its option, you have two choices bill monthly or annually. In case you choose monthly billing, you will need to pay around $31.49 per month. Annual billing will help you save some money and it costs an average of $20.99 per month.

Benefits

Regular updates

Templates, plugins, and preset options available

Drawbacks

Too Expensive

Complicated

Premiere Pro is a complicated tool to use. It is mainly made for the professionals who master these types of skills and work on big projects. If a beginner tries to access it, they may find it irrelevant and hard to understand. It takes lots of time to process and complete some basic things as well.

CyberLink PowerDirector

It is also a paid option to consider. If you choose to use CyberLink PowerDirector for the first time, you can avail of its free trial services as well. It provides a free trial of 30 days that can help you access the tool’s capability and figure out it is worth buying or not. The following are some benefits and drawbacks of choosing this particular option.

Benefits

Regular updates

Multiple features

Drawbacks

Lack of color tools

CyberLink PowerDirector is a suitable option for video editing professionals with mid-level skills. Highly skilled individuals can consider its option but they may find it easy to use and don’t get some advanced feature as per their skill set.

Conclusion

By paying attention to all these details, you can easily figure out the best final cut pro add music method. It depends on your choice that you want to use some existing audio file or want to import your own. Along with it, you can also check out some alternatives that can help you figure out what kind of tools can be considered over Final Cut Pro for better results. Filmora holds the top-notch position with lots of features, functionalities, and complete accessibilities. You need to be smart while making a final decision regarding video editor selection for creating top-notch video content to entertain the audience perfectly.

02 [Alternative For Final Cut Pro To Add Music To Video](#Part 2)

Part 1 Add Music To Final Cut Pro

Are you interested to figure out the best possible method to add music files to Final Cut Pro for video creation and other purposes? If you are looking for such an option, you should be focused on the following process.

Step1 Access Final Cut Pro

Firstly, you should focus on accessing the Final Cut Pro. You should check out the application on your desktop and open it.

Step2 Go To File

After accessing the Final Cut Pro, you can see multiple options and menus on the interface. Here, you should navigate to the ‘FILE’ option. You can find out this particular option on the top of the navigation bar.

Step3 Access File

Now, you should access the FILE button. It will lead to a fully-featured menu with multiple options. You should find out the IMPORT button and proceed.

Step4 Import Button

When you click on the IMPORT button, it will provide some choices. You should go with the option of MEDIA.

Step5 Locate File

After clicking the media button, it will present a complete file and storage interface in front of you. You should find out the audio file on your device by using such an interface. Here, you need to access the targeted folder only. You should select the audio file and hit the IMPORT button. It will bring your desired audio file to the Final Cut Pro easily for further usage.

Step6 Add Audio to Video

Once you get the audio file to the library of Final Cut Pro, after that, you should proceed by arranging it as per the video sequence and requirements. You should take the video timeline carefully and make all edits smartly. Here, you will find out drag and drop features are highly beneficial. It will help you synchronize the audio and video with ease.

It is the complete process by which you can easily add music to final cut pro. With it, you also have the option of accessing its built-in music library. By using this particular library, you can get multiple audio files with sound effects, songs, etc. You can access these files to add to the video as well. In case you don’t find something relevant to the content, you can consider the option of importing your own as per the procedure.

Part 2 Alternative For Final Cut Pro To Add Music To Video

No one can ignore the features and functionalities of Final Cut Pro. But, sometimes people don’t find it suitable or appropriate as per their video editing requirements. It is the main reason why they start looking for some alternatives that can help them in getting better results with top-notch edits.

Filmora

All individuals are not working as professional video editors or designers. Due to it, they lack technical knowledge and are also unaware of the tool’s interfaces and their usability. As a result, they start facing lots of problems with complicated tools. In case you want to access a video editor with a user-friendly interface that can be helpful in creating content easily, you can consider Filmora. It is the easiest video editor to use that can be useful in creating and editing videos with ease.

Both Windows and Mac users can access Filmora by downloading software on the system. On the other hand, Final Cut Pro is available only for the Mac.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Benefits

User-friendly interface

A big music library

Available for mobile platforms as well (Filmora)

Regular updates for features and functionalities

Drawbacks

Less audio editing features

By paying attention to these aspects, you can easily understand how important and useful Filmora is. It is also having some audio editing features. It will allow you to make changes in audio files as per the requirements and keep it perfect according to the video.

Premiere Pro

Premiere Pro is not new in the market. It is an old and famous editing tool. But, the main fact about this particular source is its usability. Everyone cannot consider the option of this particular video editor. There are multiple reasons behind it. Some people may find the tool difficult to use.

For some individuals, its charges are too high. Actually, Premiere Pro is paid source. Its plans are also too expensive. If you consider its option, you have two choices bill monthly or annually. In case you choose monthly billing, you will need to pay around $31.49 per month. Annual billing will help you save some money and it costs an average of $20.99 per month.

Benefits

Regular updates

Templates, plugins, and preset options available

Drawbacks

Too Expensive

Complicated

Premiere Pro is a complicated tool to use. It is mainly made for the professionals who master these types of skills and work on big projects. If a beginner tries to access it, they may find it irrelevant and hard to understand. It takes lots of time to process and complete some basic things as well.

CyberLink PowerDirector

It is also a paid option to consider. If you choose to use CyberLink PowerDirector for the first time, you can avail of its free trial services as well. It provides a free trial of 30 days that can help you access the tool’s capability and figure out it is worth buying or not. The following are some benefits and drawbacks of choosing this particular option.

Benefits

Regular updates

Multiple features

Drawbacks

Lack of color tools

CyberLink PowerDirector is a suitable option for video editing professionals with mid-level skills. Highly skilled individuals can consider its option but they may find it easy to use and don’t get some advanced feature as per their skill set.

Conclusion

By paying attention to all these details, you can easily figure out the best final cut pro add music method. It depends on your choice that you want to use some existing audio file or want to import your own. Along with it, you can also check out some alternatives that can help you figure out what kind of tools can be considered over Final Cut Pro for better results. Filmora holds the top-notch position with lots of features, functionalities, and complete accessibilities. You need to be smart while making a final decision regarding video editor selection for creating top-notch video content to entertain the audience perfectly.

02 [Alternative For Final Cut Pro To Add Music To Video](#Part 2)

Part 1 Add Music To Final Cut Pro

Are you interested to figure out the best possible method to add music files to Final Cut Pro for video creation and other purposes? If you are looking for such an option, you should be focused on the following process.

Step1 Access Final Cut Pro

Firstly, you should focus on accessing the Final Cut Pro. You should check out the application on your desktop and open it.

Step2 Go To File

After accessing the Final Cut Pro, you can see multiple options and menus on the interface. Here, you should navigate to the ‘FILE’ option. You can find out this particular option on the top of the navigation bar.

Step3 Access File

Now, you should access the FILE button. It will lead to a fully-featured menu with multiple options. You should find out the IMPORT button and proceed.

Step4 Import Button

When you click on the IMPORT button, it will provide some choices. You should go with the option of MEDIA.

Step5 Locate File

After clicking the media button, it will present a complete file and storage interface in front of you. You should find out the audio file on your device by using such an interface. Here, you need to access the targeted folder only. You should select the audio file and hit the IMPORT button. It will bring your desired audio file to the Final Cut Pro easily for further usage.

Step6 Add Audio to Video

Once you get the audio file to the library of Final Cut Pro, after that, you should proceed by arranging it as per the video sequence and requirements. You should take the video timeline carefully and make all edits smartly. Here, you will find out drag and drop features are highly beneficial. It will help you synchronize the audio and video with ease.

It is the complete process by which you can easily add music to final cut pro. With it, you also have the option of accessing its built-in music library. By using this particular library, you can get multiple audio files with sound effects, songs, etc. You can access these files to add to the video as well. In case you don’t find something relevant to the content, you can consider the option of importing your own as per the procedure.

Part 2 Alternative For Final Cut Pro To Add Music To Video

No one can ignore the features and functionalities of Final Cut Pro. But, sometimes people don’t find it suitable or appropriate as per their video editing requirements. It is the main reason why they start looking for some alternatives that can help them in getting better results with top-notch edits.

Filmora

All individuals are not working as professional video editors or designers. Due to it, they lack technical knowledge and are also unaware of the tool’s interfaces and their usability. As a result, they start facing lots of problems with complicated tools. In case you want to access a video editor with a user-friendly interface that can be helpful in creating content easily, you can consider Filmora. It is the easiest video editor to use that can be useful in creating and editing videos with ease.

Both Windows and Mac users can access Filmora by downloading software on the system. On the other hand, Final Cut Pro is available only for the Mac.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Benefits

User-friendly interface

A big music library

Available for mobile platforms as well (Filmora)

Regular updates for features and functionalities

Drawbacks

Less audio editing features

By paying attention to these aspects, you can easily understand how important and useful Filmora is. It is also having some audio editing features. It will allow you to make changes in audio files as per the requirements and keep it perfect according to the video.

Premiere Pro

Premiere Pro is not new in the market. It is an old and famous editing tool. But, the main fact about this particular source is its usability. Everyone cannot consider the option of this particular video editor. There are multiple reasons behind it. Some people may find the tool difficult to use.

For some individuals, its charges are too high. Actually, Premiere Pro is paid source. Its plans are also too expensive. If you consider its option, you have two choices bill monthly or annually. In case you choose monthly billing, you will need to pay around $31.49 per month. Annual billing will help you save some money and it costs an average of $20.99 per month.

Benefits

Regular updates

Templates, plugins, and preset options available

Drawbacks

Too Expensive

Complicated

Premiere Pro is a complicated tool to use. It is mainly made for the professionals who master these types of skills and work on big projects. If a beginner tries to access it, they may find it irrelevant and hard to understand. It takes lots of time to process and complete some basic things as well.

CyberLink PowerDirector

It is also a paid option to consider. If you choose to use CyberLink PowerDirector for the first time, you can avail of its free trial services as well. It provides a free trial of 30 days that can help you access the tool’s capability and figure out it is worth buying or not. The following are some benefits and drawbacks of choosing this particular option.

Benefits

Regular updates

Multiple features

Drawbacks

Lack of color tools

CyberLink PowerDirector is a suitable option for video editing professionals with mid-level skills. Highly skilled individuals can consider its option but they may find it easy to use and don’t get some advanced feature as per their skill set.

Conclusion

By paying attention to all these details, you can easily figure out the best final cut pro add music method. It depends on your choice that you want to use some existing audio file or want to import your own. Along with it, you can also check out some alternatives that can help you figure out what kind of tools can be considered over Final Cut Pro for better results. Filmora holds the top-notch position with lots of features, functionalities, and complete accessibilities. You need to be smart while making a final decision regarding video editor selection for creating top-notch video content to entertain the audience perfectly.

Also read: