Elevating Your Edit Workflow: Using Audio Duck Features in PowerDirector to Enhance Audio Transitions

How to Use Audio Ducking to Fade Out Music in PowerDirector?

Benjamin Arango

Oct 26, 2023• Proven solutions

“Can you explain to us the simple method to execute audio ducking?”

I hope you’re already aware of the audio ducking feature if you’re into video editing or any music industry. The audio ducking is commonly to balance two audios. You can see the very typical application while balancing the background music with the person speaking there. So, the different voices would pop up and needs an adjustment according to the scenario. However, selecting the most straightforward process and genuine video editor is the user’s responsibility to get the task done effectively. So, here, we would like to discuss the audio ducking function of CyberLink PowerDirector along with a suitable alternative - Wondershare Filmora.

Part 1: How to Use Audio Ducking to Fade Out Music in PowerDirector?

CyberLink PowerDirector is a video editing software with impeccable features, including Motion Tracking, Magic Movie Wizard, Encoding, Action Camera Tools, and so on. The audio ducking element in PowerDirector has automated the audio adjustment in terms of keyframes.

So, let’s consider the below steps to fade out music or fade out audio in PowerDirector audio ducking!

Step 1: Import Video

Open the CyberLink PowerDirector application, and import the video into the timeline, as shown below. Then, you can also import the background music you’d like to add to the video.

Step 2: Select Audio Ducking

Choose the background music and hit the “Audio Ducking” option from the Tools tab.

Step 3: Confirm the Audio Ducking

A pop-up audio ducking window like the below interface will appear to state that PowerDirector will automatically analyze the music.

All you need, is to hit the OK button and lend the job to PowerDirector.

Doing so will automatically add the keyframes into the background music you’ve already imported.

So, this was the entire process of music ducking keyframes automation in CyberLink PowerDirector.

Part 2: An Alternative Solution to Audio Ducking on Mac

If you’re looking for easiness, you must consider the following section for a suitable alternative!

“Which audio ducking software is the best for Mac?”

The Wondershare Filmora is not only suitable for Mac users but Windows users as well. Here are some of its features on why we used to admire Filmora for easiness and professionalism. Used by vlogger, make-up artists, and professional video editors for tutorials, editing, voice/audio editing, and after effects, Wondershare Filmora is the best choice to give a try today.

• The best part about the Wondershare Filmora is the versatility of audio editing tools.
• The window of the Audio Ducking is super intuitive and self-explanatory to the users.
• Want to go advanced? You should admire its features, including Advanced Color Tuning, Scene Detection, Green Screen, Color Match, Motion Tracking, Animation Keyframing, and so on.

All in all, the Wondershare Filmora is a remarkable video editor fulfilling the needs of endless people around the globe. It’s usually the first name in mind when it comes to innovation and simplicity.

Here is a step-by-step tutorial after which you can compare the audio ducking easiness of Wondershare Filmora with CyberLink PowerDirector.

So, let’s start without further ado!

Step 1: Install Wondershare Filmora

Click on the Try It Free button above to download and install Wondershare Filmora. Once the software installation is complete, launch it.

Step 2: Import the Video

Choose “New Project” from the primary interface, and now, go to the “Import” option to add or import the media files. You can also do a drag-and-drop.

Step 3: Select the Audio Option

Double-click the video or right-click the audio to choose the “Adjust Audio” option on the timeline that will lead you to the editing window.

Step 4: Employ Audio Ducking

You are almost there whereby tick the “Lower the volume of other clips” checkbox to proceed. Using the slider, swipe it to set the degree to which you want to lower the volume of background music.

So, these simple steps are required to enable audio ducking in Wondershare Filmora. So easy! Along with it, you can also consider using the Fade Out and Pitch slider tab for versatile audio adjustment. However, you must only check for the Ducking tab, especially when you’re a beginner and don’t want to go for extreme changes.

Conclusion

Thus, with a discussion over two different ways to implement the audio ducking feature, it’s time to state our final overview. No doubt, the PowerDirector audio ducking feature offers the simplistic way, but it lacks flexibility. Due to the keyframe setting’s automation, you can’t check for a specific part in the audio and adjust the volume as per your needs. However, this could have been done pretty quickly in Wondershare Filmora’s video editor, making it the best alternative to CyberLink PowerDirector. Keeping it the top priority, begin your journey today!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

“Can you explain to us the simple method to execute audio ducking?”

I hope you’re already aware of the audio ducking feature if you’re into video editing or any music industry. The audio ducking is commonly to balance two audios. You can see the very typical application while balancing the background music with the person speaking there. So, the different voices would pop up and needs an adjustment according to the scenario. However, selecting the most straightforward process and genuine video editor is the user’s responsibility to get the task done effectively. So, here, we would like to discuss the audio ducking function of CyberLink PowerDirector along with a suitable alternative - Wondershare Filmora.

Part 1: How to Use Audio Ducking to Fade Out Music in PowerDirector?

CyberLink PowerDirector is a video editing software with impeccable features, including Motion Tracking, Magic Movie Wizard, Encoding, Action Camera Tools, and so on. The audio ducking element in PowerDirector has automated the audio adjustment in terms of keyframes.

So, let’s consider the below steps to fade out music or fade out audio in PowerDirector audio ducking!

Step 1: Import Video

Open the CyberLink PowerDirector application, and import the video into the timeline, as shown below. Then, you can also import the background music you’d like to add to the video.

Step 2: Select Audio Ducking

Choose the background music and hit the “Audio Ducking” option from the Tools tab.

Step 3: Confirm the Audio Ducking

A pop-up audio ducking window like the below interface will appear to state that PowerDirector will automatically analyze the music.

All you need, is to hit the OK button and lend the job to PowerDirector.

Doing so will automatically add the keyframes into the background music you’ve already imported.

So, this was the entire process of music ducking keyframes automation in CyberLink PowerDirector.

Part 2: An Alternative Solution to Audio Ducking on Mac

If you’re looking for easiness, you must consider the following section for a suitable alternative!

“Which audio ducking software is the best for Mac?”

The Wondershare Filmora is not only suitable for Mac users but Windows users as well. Here are some of its features on why we used to admire Filmora for easiness and professionalism. Used by vlogger, make-up artists, and professional video editors for tutorials, editing, voice/audio editing, and after effects, Wondershare Filmora is the best choice to give a try today.

• The best part about the Wondershare Filmora is the versatility of audio editing tools.
• The window of the Audio Ducking is super intuitive and self-explanatory to the users.
• Want to go advanced? You should admire its features, including Advanced Color Tuning, Scene Detection, Green Screen, Color Match, Motion Tracking, Animation Keyframing, and so on.

All in all, the Wondershare Filmora is a remarkable video editor fulfilling the needs of endless people around the globe. It’s usually the first name in mind when it comes to innovation and simplicity.

Here is a step-by-step tutorial after which you can compare the audio ducking easiness of Wondershare Filmora with CyberLink PowerDirector.

So, let’s start without further ado!

Step 1: Install Wondershare Filmora

Click on the Try It Free button above to download and install Wondershare Filmora. Once the software installation is complete, launch it.

Step 2: Import the Video

Choose “New Project” from the primary interface, and now, go to the “Import” option to add or import the media files. You can also do a drag-and-drop.

Step 3: Select the Audio Option

Double-click the video or right-click the audio to choose the “Adjust Audio” option on the timeline that will lead you to the editing window.

Step 4: Employ Audio Ducking

You are almost there whereby tick the “Lower the volume of other clips” checkbox to proceed. Using the slider, swipe it to set the degree to which you want to lower the volume of background music.

So, these simple steps are required to enable audio ducking in Wondershare Filmora. So easy! Along with it, you can also consider using the Fade Out and Pitch slider tab for versatile audio adjustment. However, you must only check for the Ducking tab, especially when you’re a beginner and don’t want to go for extreme changes.

Conclusion

Thus, with a discussion over two different ways to implement the audio ducking feature, it’s time to state our final overview. No doubt, the PowerDirector audio ducking feature offers the simplistic way, but it lacks flexibility. Due to the keyframe setting’s automation, you can’t check for a specific part in the audio and adjust the volume as per your needs. However, this could have been done pretty quickly in Wondershare Filmora’s video editor, making it the best alternative to CyberLink PowerDirector. Keeping it the top priority, begin your journey today!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

“Can you explain to us the simple method to execute audio ducking?”

I hope you’re already aware of the audio ducking feature if you’re into video editing or any music industry. The audio ducking is commonly to balance two audios. You can see the very typical application while balancing the background music with the person speaking there. So, the different voices would pop up and needs an adjustment according to the scenario. However, selecting the most straightforward process and genuine video editor is the user’s responsibility to get the task done effectively. So, here, we would like to discuss the audio ducking function of CyberLink PowerDirector along with a suitable alternative - Wondershare Filmora.

Part 1: How to Use Audio Ducking to Fade Out Music in PowerDirector?

CyberLink PowerDirector is a video editing software with impeccable features, including Motion Tracking, Magic Movie Wizard, Encoding, Action Camera Tools, and so on. The audio ducking element in PowerDirector has automated the audio adjustment in terms of keyframes.

So, let’s consider the below steps to fade out music or fade out audio in PowerDirector audio ducking!

Step 1: Import Video

Open the CyberLink PowerDirector application, and import the video into the timeline, as shown below. Then, you can also import the background music you’d like to add to the video.

Step 2: Select Audio Ducking

Choose the background music and hit the “Audio Ducking” option from the Tools tab.

Step 3: Confirm the Audio Ducking

A pop-up audio ducking window like the below interface will appear to state that PowerDirector will automatically analyze the music.

All you need, is to hit the OK button and lend the job to PowerDirector.

Doing so will automatically add the keyframes into the background music you’ve already imported.

So, this was the entire process of music ducking keyframes automation in CyberLink PowerDirector.

Part 2: An Alternative Solution to Audio Ducking on Mac

If you’re looking for easiness, you must consider the following section for a suitable alternative!

“Which audio ducking software is the best for Mac?”

The Wondershare Filmora is not only suitable for Mac users but Windows users as well. Here are some of its features on why we used to admire Filmora for easiness and professionalism. Used by vlogger, make-up artists, and professional video editors for tutorials, editing, voice/audio editing, and after effects, Wondershare Filmora is the best choice to give a try today.

• The best part about the Wondershare Filmora is the versatility of audio editing tools.
• The window of the Audio Ducking is super intuitive and self-explanatory to the users.
• Want to go advanced? You should admire its features, including Advanced Color Tuning, Scene Detection, Green Screen, Color Match, Motion Tracking, Animation Keyframing, and so on.

All in all, the Wondershare Filmora is a remarkable video editor fulfilling the needs of endless people around the globe. It’s usually the first name in mind when it comes to innovation and simplicity.

Here is a step-by-step tutorial after which you can compare the audio ducking easiness of Wondershare Filmora with CyberLink PowerDirector.

So, let’s start without further ado!

Step 1: Install Wondershare Filmora

Click on the Try It Free button above to download and install Wondershare Filmora. Once the software installation is complete, launch it.

Step 2: Import the Video

Choose “New Project” from the primary interface, and now, go to the “Import” option to add or import the media files. You can also do a drag-and-drop.

Step 3: Select the Audio Option

Double-click the video or right-click the audio to choose the “Adjust Audio” option on the timeline that will lead you to the editing window.

Step 4: Employ Audio Ducking

You are almost there whereby tick the “Lower the volume of other clips” checkbox to proceed. Using the slider, swipe it to set the degree to which you want to lower the volume of background music.

So, these simple steps are required to enable audio ducking in Wondershare Filmora. So easy! Along with it, you can also consider using the Fade Out and Pitch slider tab for versatile audio adjustment. However, you must only check for the Ducking tab, especially when you’re a beginner and don’t want to go for extreme changes.

Conclusion

Thus, with a discussion over two different ways to implement the audio ducking feature, it’s time to state our final overview. No doubt, the PowerDirector audio ducking feature offers the simplistic way, but it lacks flexibility. Due to the keyframe setting’s automation, you can’t check for a specific part in the audio and adjust the volume as per your needs. However, this could have been done pretty quickly in Wondershare Filmora’s video editor, making it the best alternative to CyberLink PowerDirector. Keeping it the top priority, begin your journey today!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

“Can you explain to us the simple method to execute audio ducking?”

I hope you’re already aware of the audio ducking feature if you’re into video editing or any music industry. The audio ducking is commonly to balance two audios. You can see the very typical application while balancing the background music with the person speaking there. So, the different voices would pop up and needs an adjustment according to the scenario. However, selecting the most straightforward process and genuine video editor is the user’s responsibility to get the task done effectively. So, here, we would like to discuss the audio ducking function of CyberLink PowerDirector along with a suitable alternative - Wondershare Filmora.

Part 1: How to Use Audio Ducking to Fade Out Music in PowerDirector?

CyberLink PowerDirector is a video editing software with impeccable features, including Motion Tracking, Magic Movie Wizard, Encoding, Action Camera Tools, and so on. The audio ducking element in PowerDirector has automated the audio adjustment in terms of keyframes.

So, let’s consider the below steps to fade out music or fade out audio in PowerDirector audio ducking!

Step 1: Import Video

Open the CyberLink PowerDirector application, and import the video into the timeline, as shown below. Then, you can also import the background music you’d like to add to the video.

Step 2: Select Audio Ducking

Choose the background music and hit the “Audio Ducking” option from the Tools tab.

Step 3: Confirm the Audio Ducking

A pop-up audio ducking window like the below interface will appear to state that PowerDirector will automatically analyze the music.

All you need, is to hit the OK button and lend the job to PowerDirector.

Doing so will automatically add the keyframes into the background music you’ve already imported.

So, this was the entire process of music ducking keyframes automation in CyberLink PowerDirector.

Part 2: An Alternative Solution to Audio Ducking on Mac

If you’re looking for easiness, you must consider the following section for a suitable alternative!

“Which audio ducking software is the best for Mac?”

The Wondershare Filmora is not only suitable for Mac users but Windows users as well. Here are some of its features on why we used to admire Filmora for easiness and professionalism. Used by vlogger, make-up artists, and professional video editors for tutorials, editing, voice/audio editing, and after effects, Wondershare Filmora is the best choice to give a try today.

• The best part about the Wondershare Filmora is the versatility of audio editing tools.
• The window of the Audio Ducking is super intuitive and self-explanatory to the users.
• Want to go advanced? You should admire its features, including Advanced Color Tuning, Scene Detection, Green Screen, Color Match, Motion Tracking, Animation Keyframing, and so on.

All in all, the Wondershare Filmora is a remarkable video editor fulfilling the needs of endless people around the globe. It’s usually the first name in mind when it comes to innovation and simplicity.

Here is a step-by-step tutorial after which you can compare the audio ducking easiness of Wondershare Filmora with CyberLink PowerDirector.

So, let’s start without further ado!

Step 1: Install Wondershare Filmora

Click on the Try It Free button above to download and install Wondershare Filmora. Once the software installation is complete, launch it.

Step 2: Import the Video

Choose “New Project” from the primary interface, and now, go to the “Import” option to add or import the media files. You can also do a drag-and-drop.

Step 3: Select the Audio Option

Double-click the video or right-click the audio to choose the “Adjust Audio” option on the timeline that will lead you to the editing window.

Step 4: Employ Audio Ducking

You are almost there whereby tick the “Lower the volume of other clips” checkbox to proceed. Using the slider, swipe it to set the degree to which you want to lower the volume of background music.

So, these simple steps are required to enable audio ducking in Wondershare Filmora. So easy! Along with it, you can also consider using the Fade Out and Pitch slider tab for versatile audio adjustment. However, you must only check for the Ducking tab, especially when you’re a beginner and don’t want to go for extreme changes.

Conclusion

Thus, with a discussion over two different ways to implement the audio ducking feature, it’s time to state our final overview. No doubt, the PowerDirector audio ducking feature offers the simplistic way, but it lacks flexibility. Due to the keyframe setting’s automation, you can’t check for a specific part in the audio and adjust the volume as per your needs. However, this could have been done pretty quickly in Wondershare Filmora’s video editor, making it the best alternative to CyberLink PowerDirector. Keeping it the top priority, begin your journey today!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

The Ultimate Guide to Elevating Clearness in Internet-Streamed Auditory Content

In most cases, the most typical request you’ll get from video makers is to eliminate the unpleasant noises like rumble or hum from the completed piece of video. When filming, it’s tough to get good audio since the dialogue is often muffled by ambient noise, such as the dreaded whir of an air conditioning unit or fans. When combining and filming sound effects or other design aspects for the video, background noise is often removed.

Fortunately, there are a few approaches that you can take to remove noise from audio Online. You can denoise your video or audio by adding some background music or using audio or video editing software to reduce noise. If you’re looking for a technique to get rid of background noise, this article will serve you well in your quest. Let’s get started!

In this article

01 What Is Audio Noise And Why Is It Harmful?

02 How to Remove Background Noise Online

03 Tips For Removing Background Noise From Audio BEFORE You Record

04 FAQs About Removing Audio Noise From Video Online

Part 1: What Is Audio Noise And Why Is It Harmful?

No definition exists for audio noise; however, it is often defined as background noises such as fans, people chatting, automobiles or trucks going by, buzzing from broken audio wiring, or other ambient sounds that should not be included in your film. Your viewers will be distracted from the crucial information provided by the individual speaking in your video if the audio is too noisy.

Compared to that, noisy audios tend to damage the experience you’re looking for. Consider this: if you’re listening to a voice recording of your manager at work and it’s noisy to a point, you’re unable to make sense of it, you would most probably end up missing out on crucial details.

When it comes to creating a decent video, clear audio goes a long way. But that’s not all there is to it. A clear audio track could be heard in almost all of the videos that received four or five stars for “how correctly did the film accomplish its purpose” and “how did you personally assess the video,” according to the submissions.

Part 2: How to Remove Background Noise Online

There are various ways to eliminate all the background noise from the audio. Below is a list of the best online background noise removers to help you do that.2. Veed.io

Website: https://www.veed.io/

VEED is one of the most super-simple online video editors that cleans up background interference with a single click of the mouse, making it an excellent choice for beginners. There is no need to re-record your audio. There is no need for pricey sound-blocking microphones.

You can quickly eliminate all undesirable background noise from your audio files by using VEED’s background noise remover. VEED can help you remove background noise from any audio file, including MP3, WMA, and more.

No matter what type of audio file you have - MP3, WMA, or more - and no matter what type of background noise you have - wind conditions, vehicular, static, white fan sound - VEED can assist you in wiping clean your audio in a couple of moments.

How to remove background noise from video audio with Veed online?

Step 1: Click on the Choose Audio option to upload your audio file.

Step 2: Click on the audio track to bring up the Settings menu, and then choose ‘Clean Audio.’ Background noise will be eliminated in a matter of seconds by itself.

Step 3: That’s all there is to it; you are finished. When you click on ‘Export,’ your new file will be rendered in seconds.

Pros

• Simple to use
• Offers multiple features (add background music, cut, trim, etc.)
• Three-step process

Cons

• Not too user-friendly

3. Audio Denoise

Website: https://audiodenoise.com/

The number second on our list is the Audiodenoise online noise removal tool. Similar to the first one, it’s time to use, supports multiple files, and most importantly, helps you get rid of the unwanted noise from your audio.

Other than that, the tool offers plenty of customization options, such as time soothing of noise reduction filter, model noise based on noise modulation tracking, analysis block size, etc. So, how can you get rid of the background noise? Follow the steps here!

How to remove background noise online with Audio Denoise?

Step 1: Click on the Choose File option to begin with. You can also select the video from the Demo files option.

Step 2: After uploading the file, press on the Process option to get rid of the unwanted noise from the audio.

Step 3: After the audio is done processing, click on the Download option to export your video to your PC.

Pros

• The straightforward noise reduction process
• Any file of your choice
• Plenty of options to customize audio

Cons

• Takes time to process the video
• Limited to 40MB

4. Audiotoolset

Website: https://audiotoolset.com/noise-reduction

The third one on our list is the Audio Toolset. With its help, this tool may make audio recordings with less background noise. You need to click a few times, and the audio file will be processed for you instantly.

Voice recordings may benefit from using this program, which is designed to remove undesirable noises while maintaining a high level of audio quality.

This program employs a generic noise-reduction method that should operate without any further adjustment for most recordings.

How to reduce background noise from video audio with Audio Tool Set?

Step 1: Click on the Browse Computer or Drag and Drop files to the website to begin the process.

Step 2: After your file has been uploaded, click on the Process option to reduce the noise.

Step 3: Listen to the audio carefully and click on the Download option to export the file to your PC.

Pros

• Excellent user-interface
• Straightforward process
• Great many audio editing features

Cons

• Takes time to process the video
• Limited to 50MB and MP3, WAV, FLAC and oGG format

5. Weet

Website: https://weet.co/remove-background-noise-from-video/

Weet is a video chat solution built for remote teams. It is available for free. Background noise or echoes may interfere with your live meetings, but with Weet asynchronous video, clean audio recording is achievable without sacrificing quality.

If you want to eliminate background noise from your recording, weet is now a tool that can help you accomplish precisely that.

How to remove background noise from video online with Weet?

Step 1: Click “Create Weet“ after you’ve logged in to get started.

Step 2: To access your recording preferences, click the Gear symbol in the lower-left corner of the screen.

Step 3: It’s as simple as clicking the “Activate Noise Cancellation“ switch! Once you begin recording your weet, their AI technology will automatically remove any background noise.

Pros

• Excellent features for professionals
• Straightforward process
• Al tool to eliminate noise from the audio

Cons

• Beginners may find it challenging to use

You may also like: How to reduce audio noise during recording

Part 3: Tips For Removing Background Noise From Audio BEFORE You Record

We all want to get rid of the noisy background from our audio. Follow these tips below to get clean and supreme audio quality:

Tip 1: Avoid Noisy Places

The easiest method to avoid having noisy audio in the first place is to avoid having noisy elements and surroundings in the first place. Recording in a peaceful area is essential for this to be accomplished.

A professional recording studio is not required to get excellent results, but you should choose the quietest room or place that you can locate.

After that, you should get acquainted with the normal ambient noises heard in that location. Is there any outside noise, such as heavy trucks or other traffic? What about the heating and air conditioning systems, for that matter? Is there a sound of the fan turning on and off?

Does it seem like you can hear your co-workers or people conversing in the adjacent rooms? Is there a buzzing sound coming from the fluorescent lighting? Those are just a few examples of the kind of sounds that might appear on your voice-over recording when you record it yourself.

Tip 2: Record A Test

After that, make a practice tape of your room. You do not need to talk. However, it would help if you used the same microphone you will be using for your voice-over recording.

Take 10-20 seconds of the ambient noise in the room and save it to your computer. This is referred to as recording the room tone.

Tip 3: Analyze the Test Recording

After that, put on your headphones and listen to your room tone recording. What sounds do you hear that you can quickly remove from your environment? Suppose you can hear the fan from your heating/cooling system running. You may turn it off while you are recording.

Alternatively, if you hear individuals conversing in the background, you might respectfully request that they transfer their discussion to a more appropriate location. If at all feasible, you should switch off any buzzing lights.

Your room tone recording will also assist you in reducing audio noise once you have completed your recording session. Your room tone recording may serve as a baseline for your audio program, which can then be used to eliminate noise.

Part 4: FAQs About Removing Audio Noise From Video Online

1.Can Background Noise Be Removed From Audio

Yes, the background can be removed from audio easily nowadays, whether it’s after you’ve done recording or before recording audio; there are plenty of online software and applications, both available for your PC and smartphones.

These can help you get rid of the unwanted noise from your audio—some of the best online websites that can help you achieve that have been reviewed above. Choose the one that meets your needs!

2. Is There Anything I Can Do To Prevent Noisy Audio Before I Record?

Prior to recording, it is essential to reduce any acoustic noise sources if at all feasible. During recording, airflow may cause havoc on microphone preamplifiers, resulting in artifacts that may be difficult to remove.

Be careful to utilize adequate windscreens on your microphones, mainly when recording outside. Sound sources such as wind noise, for example, may frequently be discovered and appropriately eliminated by giving them a cursory listen via headphones.

02 How to Remove Background Noise Online

03 Tips For Removing Background Noise From Audio BEFORE You Record

04 FAQs About Removing Audio Noise From Video Online

Part 1: What Is Audio Noise And Why Is It Harmful?

No definition exists for audio noise; however, it is often defined as background noises such as fans, people chatting, automobiles or trucks going by, buzzing from broken audio wiring, or other ambient sounds that should not be included in your film. Your viewers will be distracted from the crucial information provided by the individual speaking in your video if the audio is too noisy.

Compared to that, noisy audios tend to damage the experience you’re looking for. Consider this: if you’re listening to a voice recording of your manager at work and it’s noisy to a point, you’re unable to make sense of it, you would most probably end up missing out on crucial details.

When it comes to creating a decent video, clear audio goes a long way. But that’s not all there is to it. A clear audio track could be heard in almost all of the videos that received four or five stars for “how correctly did the film accomplish its purpose” and “how did you personally assess the video,” according to the submissions.

Part 2: How to Remove Background Noise Online

There are various ways to eliminate all the background noise from the audio. Below is a list of the best online background noise removers to help you do that.2. Veed.io

Website: https://www.veed.io/

VEED is one of the most super-simple online video editors that cleans up background interference with a single click of the mouse, making it an excellent choice for beginners. There is no need to re-record your audio. There is no need for pricey sound-blocking microphones.

You can quickly eliminate all undesirable background noise from your audio files by using VEED’s background noise remover. VEED can help you remove background noise from any audio file, including MP3, WMA, and more.

No matter what type of audio file you have - MP3, WMA, or more - and no matter what type of background noise you have - wind conditions, vehicular, static, white fan sound - VEED can assist you in wiping clean your audio in a couple of moments.

How to remove background noise from video audio with Veed online?

Step 1: Click on the Choose Audio option to upload your audio file.

Step 2: Click on the audio track to bring up the Settings menu, and then choose ‘Clean Audio.’ Background noise will be eliminated in a matter of seconds by itself.

Step 3: That’s all there is to it; you are finished. When you click on ‘Export,’ your new file will be rendered in seconds.

Pros

• Simple to use
• Offers multiple features (add background music, cut, trim, etc.)
• Three-step process

Cons

• Not too user-friendly

3. Audio Denoise

Website: https://audiodenoise.com/

The number second on our list is the Audiodenoise online noise removal tool. Similar to the first one, it’s time to use, supports multiple files, and most importantly, helps you get rid of the unwanted noise from your audio.

Other than that, the tool offers plenty of customization options, such as time soothing of noise reduction filter, model noise based on noise modulation tracking, analysis block size, etc. So, how can you get rid of the background noise? Follow the steps here!

How to remove background noise online with Audio Denoise?

Step 1: Click on the Choose File option to begin with. You can also select the video from the Demo files option.

Step 2: After uploading the file, press on the Process option to get rid of the unwanted noise from the audio.

Step 3: After the audio is done processing, click on the Download option to export your video to your PC.

Pros

• The straightforward noise reduction process
• Any file of your choice
• Plenty of options to customize audio

Cons

• Takes time to process the video
• Limited to 40MB

4. Audiotoolset

Website: https://audiotoolset.com/noise-reduction

The third one on our list is the Audio Toolset. With its help, this tool may make audio recordings with less background noise. You need to click a few times, and the audio file will be processed for you instantly.

Voice recordings may benefit from using this program, which is designed to remove undesirable noises while maintaining a high level of audio quality.

This program employs a generic noise-reduction method that should operate without any further adjustment for most recordings.

How to reduce background noise from video audio with Audio Tool Set?

Step 1: Click on the Browse Computer or Drag and Drop files to the website to begin the process.

Step 2: After your file has been uploaded, click on the Process option to reduce the noise.

Step 3: Listen to the audio carefully and click on the Download option to export the file to your PC.

Pros

• Excellent user-interface
• Straightforward process
• Great many audio editing features

Cons

• Takes time to process the video
• Limited to 50MB and MP3, WAV, FLAC and oGG format

5. Weet

Website: https://weet.co/remove-background-noise-from-video/

Weet is a video chat solution built for remote teams. It is available for free. Background noise or echoes may interfere with your live meetings, but with Weet asynchronous video, clean audio recording is achievable without sacrificing quality.

If you want to eliminate background noise from your recording, weet is now a tool that can help you accomplish precisely that.

How to remove background noise from video online with Weet?

Step 1: Click “Create Weet“ after you’ve logged in to get started.

Step 2: To access your recording preferences, click the Gear symbol in the lower-left corner of the screen.

Step 3: It’s as simple as clicking the “Activate Noise Cancellation“ switch! Once you begin recording your weet, their AI technology will automatically remove any background noise.

Pros

• Excellent features for professionals
• Straightforward process
• Al tool to eliminate noise from the audio

Cons

• Beginners may find it challenging to use

You may also like: How to reduce audio noise during recording

Part 3: Tips For Removing Background Noise From Audio BEFORE You Record

We all want to get rid of the noisy background from our audio. Follow these tips below to get clean and supreme audio quality:

Tip 1: Avoid Noisy Places

The easiest method to avoid having noisy audio in the first place is to avoid having noisy elements and surroundings in the first place. Recording in a peaceful area is essential for this to be accomplished.

A professional recording studio is not required to get excellent results, but you should choose the quietest room or place that you can locate.

After that, you should get acquainted with the normal ambient noises heard in that location. Is there any outside noise, such as heavy trucks or other traffic? What about the heating and air conditioning systems, for that matter? Is there a sound of the fan turning on and off?

Does it seem like you can hear your co-workers or people conversing in the adjacent rooms? Is there a buzzing sound coming from the fluorescent lighting? Those are just a few examples of the kind of sounds that might appear on your voice-over recording when you record it yourself.

Tip 2: Record A Test

After that, make a practice tape of your room. You do not need to talk. However, it would help if you used the same microphone you will be using for your voice-over recording.

Take 10-20 seconds of the ambient noise in the room and save it to your computer. This is referred to as recording the room tone.

Tip 3: Analyze the Test Recording

After that, put on your headphones and listen to your room tone recording. What sounds do you hear that you can quickly remove from your environment? Suppose you can hear the fan from your heating/cooling system running. You may turn it off while you are recording.

Alternatively, if you hear individuals conversing in the background, you might respectfully request that they transfer their discussion to a more appropriate location. If at all feasible, you should switch off any buzzing lights.

Your room tone recording will also assist you in reducing audio noise once you have completed your recording session. Your room tone recording may serve as a baseline for your audio program, which can then be used to eliminate noise.

Part 4: FAQs About Removing Audio Noise From Video Online

1.Can Background Noise Be Removed From Audio

Yes, the background can be removed from audio easily nowadays, whether it’s after you’ve done recording or before recording audio; there are plenty of online software and applications, both available for your PC and smartphones.

These can help you get rid of the unwanted noise from your audio—some of the best online websites that can help you achieve that have been reviewed above. Choose the one that meets your needs!

2. Is There Anything I Can Do To Prevent Noisy Audio Before I Record?

Prior to recording, it is essential to reduce any acoustic noise sources if at all feasible. During recording, airflow may cause havoc on microphone preamplifiers, resulting in artifacts that may be difficult to remove.

Be careful to utilize adequate windscreens on your microphones, mainly when recording outside. Sound sources such as wind noise, for example, may frequently be discovered and appropriately eliminated by giving them a cursory listen via headphones.

02 How to Remove Background Noise Online

03 Tips For Removing Background Noise From Audio BEFORE You Record

04 FAQs About Removing Audio Noise From Video Online

Part 1: What Is Audio Noise And Why Is It Harmful?

No definition exists for audio noise; however, it is often defined as background noises such as fans, people chatting, automobiles or trucks going by, buzzing from broken audio wiring, or other ambient sounds that should not be included in your film. Your viewers will be distracted from the crucial information provided by the individual speaking in your video if the audio is too noisy.

Compared to that, noisy audios tend to damage the experience you’re looking for. Consider this: if you’re listening to a voice recording of your manager at work and it’s noisy to a point, you’re unable to make sense of it, you would most probably end up missing out on crucial details.

When it comes to creating a decent video, clear audio goes a long way. But that’s not all there is to it. A clear audio track could be heard in almost all of the videos that received four or five stars for “how correctly did the film accomplish its purpose” and “how did you personally assess the video,” according to the submissions.

Part 2: How to Remove Background Noise Online

There are various ways to eliminate all the background noise from the audio. Below is a list of the best online background noise removers to help you do that.2. Veed.io

Website: https://www.veed.io/

VEED is one of the most super-simple online video editors that cleans up background interference with a single click of the mouse, making it an excellent choice for beginners. There is no need to re-record your audio. There is no need for pricey sound-blocking microphones.

You can quickly eliminate all undesirable background noise from your audio files by using VEED’s background noise remover. VEED can help you remove background noise from any audio file, including MP3, WMA, and more.

No matter what type of audio file you have - MP3, WMA, or more - and no matter what type of background noise you have - wind conditions, vehicular, static, white fan sound - VEED can assist you in wiping clean your audio in a couple of moments.

How to remove background noise from video audio with Veed online?

Step 1: Click on the Choose Audio option to upload your audio file.

Step 2: Click on the audio track to bring up the Settings menu, and then choose ‘Clean Audio.’ Background noise will be eliminated in a matter of seconds by itself.

Step 3: That’s all there is to it; you are finished. When you click on ‘Export,’ your new file will be rendered in seconds.

Pros

• Simple to use
• Offers multiple features (add background music, cut, trim, etc.)
• Three-step process

Cons

• Not too user-friendly

3. Audio Denoise

Website: https://audiodenoise.com/

The number second on our list is the Audiodenoise online noise removal tool. Similar to the first one, it’s time to use, supports multiple files, and most importantly, helps you get rid of the unwanted noise from your audio.

Other than that, the tool offers plenty of customization options, such as time soothing of noise reduction filter, model noise based on noise modulation tracking, analysis block size, etc. So, how can you get rid of the background noise? Follow the steps here!

How to remove background noise online with Audio Denoise?

Step 1: Click on the Choose File option to begin with. You can also select the video from the Demo files option.

Step 2: After uploading the file, press on the Process option to get rid of the unwanted noise from the audio.

Step 3: After the audio is done processing, click on the Download option to export your video to your PC.

Pros

• The straightforward noise reduction process
• Any file of your choice
• Plenty of options to customize audio

Cons

• Takes time to process the video
• Limited to 40MB

4. Audiotoolset

Website: https://audiotoolset.com/noise-reduction

The third one on our list is the Audio Toolset. With its help, this tool may make audio recordings with less background noise. You need to click a few times, and the audio file will be processed for you instantly.

Voice recordings may benefit from using this program, which is designed to remove undesirable noises while maintaining a high level of audio quality.

This program employs a generic noise-reduction method that should operate without any further adjustment for most recordings.

How to reduce background noise from video audio with Audio Tool Set?

Step 1: Click on the Browse Computer or Drag and Drop files to the website to begin the process.

Step 2: After your file has been uploaded, click on the Process option to reduce the noise.

Step 3: Listen to the audio carefully and click on the Download option to export the file to your PC.

Pros

• Excellent user-interface
• Straightforward process
• Great many audio editing features

Cons

• Takes time to process the video
• Limited to 50MB and MP3, WAV, FLAC and oGG format

5. Weet

Website: https://weet.co/remove-background-noise-from-video/

Weet is a video chat solution built for remote teams. It is available for free. Background noise or echoes may interfere with your live meetings, but with Weet asynchronous video, clean audio recording is achievable without sacrificing quality.

If you want to eliminate background noise from your recording, weet is now a tool that can help you accomplish precisely that.

How to remove background noise from video online with Weet?

Step 1: Click “Create Weet“ after you’ve logged in to get started.

Step 2: To access your recording preferences, click the Gear symbol in the lower-left corner of the screen.

Step 3: It’s as simple as clicking the “Activate Noise Cancellation“ switch! Once you begin recording your weet, their AI technology will automatically remove any background noise.

Pros

• Excellent features for professionals
• Straightforward process
• Al tool to eliminate noise from the audio

Cons

• Beginners may find it challenging to use

You may also like: How to reduce audio noise during recording

Part 3: Tips For Removing Background Noise From Audio BEFORE You Record

We all want to get rid of the noisy background from our audio. Follow these tips below to get clean and supreme audio quality:

Tip 1: Avoid Noisy Places

The easiest method to avoid having noisy audio in the first place is to avoid having noisy elements and surroundings in the first place. Recording in a peaceful area is essential for this to be accomplished.

A professional recording studio is not required to get excellent results, but you should choose the quietest room or place that you can locate.

After that, you should get acquainted with the normal ambient noises heard in that location. Is there any outside noise, such as heavy trucks or other traffic? What about the heating and air conditioning systems, for that matter? Is there a sound of the fan turning on and off?

Does it seem like you can hear your co-workers or people conversing in the adjacent rooms? Is there a buzzing sound coming from the fluorescent lighting? Those are just a few examples of the kind of sounds that might appear on your voice-over recording when you record it yourself.

Tip 2: Record A Test

After that, make a practice tape of your room. You do not need to talk. However, it would help if you used the same microphone you will be using for your voice-over recording.

Take 10-20 seconds of the ambient noise in the room and save it to your computer. This is referred to as recording the room tone.

Tip 3: Analyze the Test Recording

After that, put on your headphones and listen to your room tone recording. What sounds do you hear that you can quickly remove from your environment? Suppose you can hear the fan from your heating/cooling system running. You may turn it off while you are recording.

Alternatively, if you hear individuals conversing in the background, you might respectfully request that they transfer their discussion to a more appropriate location. If at all feasible, you should switch off any buzzing lights.

Your room tone recording will also assist you in reducing audio noise once you have completed your recording session. Your room tone recording may serve as a baseline for your audio program, which can then be used to eliminate noise.

Part 4: FAQs About Removing Audio Noise From Video Online

1.Can Background Noise Be Removed From Audio

Yes, the background can be removed from audio easily nowadays, whether it’s after you’ve done recording or before recording audio; there are plenty of online software and applications, both available for your PC and smartphones.

These can help you get rid of the unwanted noise from your audio—some of the best online websites that can help you achieve that have been reviewed above. Choose the one that meets your needs!

2. Is There Anything I Can Do To Prevent Noisy Audio Before I Record?

Prior to recording, it is essential to reduce any acoustic noise sources if at all feasible. During recording, airflow may cause havoc on microphone preamplifiers, resulting in artifacts that may be difficult to remove.

Be careful to utilize adequate windscreens on your microphones, mainly when recording outside. Sound sources such as wind noise, for example, may frequently be discovered and appropriately eliminated by giving them a cursory listen via headphones.

02 How to Remove Background Noise Online

03 Tips For Removing Background Noise From Audio BEFORE You Record

04 FAQs About Removing Audio Noise From Video Online

Part 1: What Is Audio Noise And Why Is It Harmful?

No definition exists for audio noise; however, it is often defined as background noises such as fans, people chatting, automobiles or trucks going by, buzzing from broken audio wiring, or other ambient sounds that should not be included in your film. Your viewers will be distracted from the crucial information provided by the individual speaking in your video if the audio is too noisy.

Compared to that, noisy audios tend to damage the experience you’re looking for. Consider this: if you’re listening to a voice recording of your manager at work and it’s noisy to a point, you’re unable to make sense of it, you would most probably end up missing out on crucial details.

When it comes to creating a decent video, clear audio goes a long way. But that’s not all there is to it. A clear audio track could be heard in almost all of the videos that received four or five stars for “how correctly did the film accomplish its purpose” and “how did you personally assess the video,” according to the submissions.

Part 2: How to Remove Background Noise Online

There are various ways to eliminate all the background noise from the audio. Below is a list of the best online background noise removers to help you do that.2. Veed.io

Website: https://www.veed.io/

VEED is one of the most super-simple online video editors that cleans up background interference with a single click of the mouse, making it an excellent choice for beginners. There is no need to re-record your audio. There is no need for pricey sound-blocking microphones.

You can quickly eliminate all undesirable background noise from your audio files by using VEED’s background noise remover. VEED can help you remove background noise from any audio file, including MP3, WMA, and more.

No matter what type of audio file you have - MP3, WMA, or more - and no matter what type of background noise you have - wind conditions, vehicular, static, white fan sound - VEED can assist you in wiping clean your audio in a couple of moments.

How to remove background noise from video audio with Veed online?

Step 1: Click on the Choose Audio option to upload your audio file.

Step 2: Click on the audio track to bring up the Settings menu, and then choose ‘Clean Audio.’ Background noise will be eliminated in a matter of seconds by itself.

Step 3: That’s all there is to it; you are finished. When you click on ‘Export,’ your new file will be rendered in seconds.

Pros

• Simple to use
• Offers multiple features (add background music, cut, trim, etc.)
• Three-step process

Cons

• Not too user-friendly

3. Audio Denoise

Website: https://audiodenoise.com/

The number second on our list is the Audiodenoise online noise removal tool. Similar to the first one, it’s time to use, supports multiple files, and most importantly, helps you get rid of the unwanted noise from your audio.

Other than that, the tool offers plenty of customization options, such as time soothing of noise reduction filter, model noise based on noise modulation tracking, analysis block size, etc. So, how can you get rid of the background noise? Follow the steps here!

How to remove background noise online with Audio Denoise?

Step 1: Click on the Choose File option to begin with. You can also select the video from the Demo files option.

Step 2: After uploading the file, press on the Process option to get rid of the unwanted noise from the audio.

Step 3: After the audio is done processing, click on the Download option to export your video to your PC.

Pros

• The straightforward noise reduction process
• Any file of your choice
• Plenty of options to customize audio

Cons

• Takes time to process the video
• Limited to 40MB

4. Audiotoolset

Website: https://audiotoolset.com/noise-reduction

The third one on our list is the Audio Toolset. With its help, this tool may make audio recordings with less background noise. You need to click a few times, and the audio file will be processed for you instantly.

Voice recordings may benefit from using this program, which is designed to remove undesirable noises while maintaining a high level of audio quality.

This program employs a generic noise-reduction method that should operate without any further adjustment for most recordings.

How to reduce background noise from video audio with Audio Tool Set?

Step 1: Click on the Browse Computer or Drag and Drop files to the website to begin the process.

Step 2: After your file has been uploaded, click on the Process option to reduce the noise.

Step 3: Listen to the audio carefully and click on the Download option to export the file to your PC.

Pros

• Excellent user-interface
• Straightforward process
• Great many audio editing features

Cons

• Takes time to process the video
• Limited to 50MB and MP3, WAV, FLAC and oGG format

5. Weet

Website: https://weet.co/remove-background-noise-from-video/

Weet is a video chat solution built for remote teams. It is available for free. Background noise or echoes may interfere with your live meetings, but with Weet asynchronous video, clean audio recording is achievable without sacrificing quality.

If you want to eliminate background noise from your recording, weet is now a tool that can help you accomplish precisely that.

How to remove background noise from video online with Weet?

Step 1: Click “Create Weet“ after you’ve logged in to get started.

Step 2: To access your recording preferences, click the Gear symbol in the lower-left corner of the screen.

Step 3: It’s as simple as clicking the “Activate Noise Cancellation“ switch! Once you begin recording your weet, their AI technology will automatically remove any background noise.

Pros

• Excellent features for professionals
• Straightforward process
• Al tool to eliminate noise from the audio

Cons

• Beginners may find it challenging to use

You may also like: How to reduce audio noise during recording

Part 3: Tips For Removing Background Noise From Audio BEFORE You Record

We all want to get rid of the noisy background from our audio. Follow these tips below to get clean and supreme audio quality:

Tip 1: Avoid Noisy Places

The easiest method to avoid having noisy audio in the first place is to avoid having noisy elements and surroundings in the first place. Recording in a peaceful area is essential for this to be accomplished.

A professional recording studio is not required to get excellent results, but you should choose the quietest room or place that you can locate.

After that, you should get acquainted with the normal ambient noises heard in that location. Is there any outside noise, such as heavy trucks or other traffic? What about the heating and air conditioning systems, for that matter? Is there a sound of the fan turning on and off?

Does it seem like you can hear your co-workers or people conversing in the adjacent rooms? Is there a buzzing sound coming from the fluorescent lighting? Those are just a few examples of the kind of sounds that might appear on your voice-over recording when you record it yourself.

Tip 2: Record A Test

After that, make a practice tape of your room. You do not need to talk. However, it would help if you used the same microphone you will be using for your voice-over recording.

Take 10-20 seconds of the ambient noise in the room and save it to your computer. This is referred to as recording the room tone.

Tip 3: Analyze the Test Recording

After that, put on your headphones and listen to your room tone recording. What sounds do you hear that you can quickly remove from your environment? Suppose you can hear the fan from your heating/cooling system running. You may turn it off while you are recording.

Alternatively, if you hear individuals conversing in the background, you might respectfully request that they transfer their discussion to a more appropriate location. If at all feasible, you should switch off any buzzing lights.

Your room tone recording will also assist you in reducing audio noise once you have completed your recording session. Your room tone recording may serve as a baseline for your audio program, which can then be used to eliminate noise.

Part 4: FAQs About Removing Audio Noise From Video Online

1.Can Background Noise Be Removed From Audio

Yes, the background can be removed from audio easily nowadays, whether it’s after you’ve done recording or before recording audio; there are plenty of online software and applications, both available for your PC and smartphones.

These can help you get rid of the unwanted noise from your audio—some of the best online websites that can help you achieve that have been reviewed above. Choose the one that meets your needs!

2. Is There Anything I Can Do To Prevent Noisy Audio Before I Record?

Prior to recording, it is essential to reduce any acoustic noise sources if at all feasible. During recording, airflow may cause havoc on microphone preamplifiers, resulting in artifacts that may be difficult to remove.

Be careful to utilize adequate windscreens on your microphones, mainly when recording outside. Sound sources such as wind noise, for example, may frequently be discovered and appropriately eliminated by giving them a cursory listen via headphones.

Mastering Audio Clarity: Techniques for Eliminating Distortion in Videos

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Also read: