Clearer Soundscapes: Strategies to Eradicate Unwanted Whistling Noises

Creating content can be fun most of the time. The shoot is perfect and the scenes are spotless. You are confident that you got everything right. But then, when you listen to the recording, you notice a continuous hissing sound. This takes you back as you have to decide to remove hiss from audio before editing the video. Luckily, several hiss removal approaches will work just fine. In this article, we take you through the audio cleanup process to help you with your hiss reduction efforts.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Integrating Sound Into Visual Media: Adobe Premiere Pro Guide

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Look at any of the spot commercials, wedding videos, or even some family candid videos. Adding audio makes them appealing and likable. To catch a potential customer or create an emotional connection with the viewer combination of audio and video is a must. This makes the footage attractive and exceptional.

Read on to know more about the step-by-step approach how to add audio to video in Adobe Premiere Pro.

In this article

01 [How to add audio to video in Premiere Pro](#Part 1)

02 [How to adjust audio in Premiere Pro](#Part 2)

03 [Adding Audio to Video files](#Part 3)

Part 1 How to add audio to video in Premiere Pro

Some essential pointers for all would-be videographers are:

● Before you add audio to video in Premiere Pro, be ready to see your file size increase to a large extent. If you add a background score of 15MB, your total video file size will increase by the same amount of 15MB. The best way to take care of such a problem is to use additional compression techniques to get a suitable file size.

● Most videographers use lots of software tools to add audio to video professionally. One such trending software tool is the Adobe Premiere Pro. Its simple to add audio to video in Premiere Pro, edit your audio and video, and fine-tune the audio volume of each video project.

Let’s learn how.

Step1 Find out the Audio option

Navigate to the Audio workspace, select Audio at the top on the tools bar

Step2 Choose the Workspace

Click Window select Workspace click on Audio

Step3 Check toolbar

Within Audio, click on Choose Window Media Browser to show the Media Browser toolbar.

Step4 Select audio files

Go to your audio file; for Windows OS, right-click or control-click the selected audio file for macOS.

Step5 Import and add

Please select the desired audio file, then click import to add it to your Project.

An important tip is to keep the Ingest box selected if you want to copy your audio file concurrently to your project folder.

Adding audio to your series

Step1 Go to the Project panel

Select Window, click on Project to open the Project panel.

Step2 Select audio file

Click on the audio file you imported to select it.

Step3 Check the waveform

Double click the file to open it in the Source panel to check the sound and waveform.

Step4 Check sounds

Play the audio file if you want to check the audio quality, volume, and overall sound.

Step5 Add audio to the video track

Hold the left click on your mouse to drag the audio file to the series in the Timeline panel. You can add any audio file to the video track listed in the panel window in this step.

Step6 Trim audio file

Select the Trim option to trim your audio file the same way you will edit the video file in the final step.

Part 2 How to adjust audio in Premiere Pro

Now that you have understood how to add audio to video in Adobe Premier Pro. Let’s know how to adjust audio in Premier Pro.

Step1 Activate the series

Press on the spacebar to activate your series in the Program panel (appears in the top right of the panel)

Step2 Stop playback

To stop the playback, press the space bar again.

Step3 Choose starting point of playback

Press down the left mouse button to hold and drag the Blue colored play head to wherever you desire the playback to start.

If you feel the audio track is mild or too harsh compared to the rest of the audio series, change each audio track’s volume separately.

Step1 Select Audio Track Mixer

Click Window selects Audio Track Mixer from the menu.

Step2 Click the series name to see the audio mixer

Click the series name of your audio file to show the audio mixer for your series.

Step3 Choose playback to play the audio

At the bottom of the panel is the Audio Track Mixer. Click on playback to star, pause or play your audio in-ring sequence.

Step4 Click on the slider

When your audio file plays or loops, click on the slider to move up or down. It will increase or reduce the volume of each separate audio track in your audio series.

Step5 Adjust the volume

Use the slider to adjust the overall audio volume

Tips

Always keep the audio projects within the -6 to 3 dB volume range to get the best quality of the audio effect. Any lower you won’t be able to hear the sound, or if it’s higher, the sound will hurt the listeners’ ears.

Professional advice to all beginner-level videographers is that as Premiere Pro is complex so you need more straightforward tools like Filmora for all your video editing work. Filmora is easy to use and much cheaper than Premiere Pro.

You may think now why or how Filmora can be the best as an alternative on how to add audio to video using Premiere Pro. Well! It will help you to transform your video into a piece of art incredibly by offering simple drag and drop options, including an easy-to-use interface and powerful editing tools. You can:

● Edit and create your videos with minimal effort

● Get a Music Library to add comedy, fear, tension, and love to every scene

● Get several royalty-free songs and sound effects

● Create videos with up to 800 stunning effects

● Unleash your creativity with its offered Hollywood effects

● Import and export in almost any type of video format

How to use Filmora to add audio to video

Adding sound to any video file enhances its viewability and the whole experience of watching any video. To do this, you need to add audio to video. The same can be done quickly in Filmora, a 3rd-party video editing software tool now the hot favorite of amateur and professional video editors. Below we describe how to add audio to video in Filmora.

Import Media

To start the process of adding audio to video follow these steps.

Step1 Select the audio, add using the Import option or drag and select

Import selected audio using the Filmora Media Panel and add it to your timeline. You can also choose and drag the audio file from the source folder to the Media Panel. Filmora supports multiple audio file formats to ease adding audio to video. The supported audio files are MP3, M4V, MPA, WAV, WMA.

Step2 Add and make the audio file

Adding the audio file to Filmora Media Panel makes it a media asset and can now be used multiple times in future projects. The original file remains as Filmora doesn’t change the original audio file.

Step3 Copying or deleting an audio file

In Filmora, using the feature of copying or deleting an audio file, you can work on the audio and video from any computer or remote PC.

Part 3 Adding Audio to Video files

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Step1 Click on Import in the Media Panel

Select the audio and video files to import them into Filmora.

Step2 Click on the video file to add audio

Press the Ctrl key (Windows) or Cmd key (Mac OS) and click on the audio file.

Step3 Add audio to video

Right-click on the files selected and choose the Merge audio & video option to add audio to the video.

Filmora analyzes audio and video files and replaces the existing audio with the newly selected audio file. Once the synchronization process is over, the new merged file will be available in the Media Panel for future processing.

The synchronized file will have the same terminology as the original video file with a difference. It will get an extension Merged to its name.

The original file will not get affected in Filmora. This software tool only references the files to generate a new file. The new file created when you add audio to the video can now be added to the timeline and exported.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

So, this article listed how to add audio to video in Premiere Pro via a step-by-step guide. The guide lets you know the easy method of adding audio to video in Adobe Premiere Pro to all potential videographers. Thus, you can now start your journey of video edition by putting your best click forward!

Try It Free Try It Free

Look at any of the spot commercials, wedding videos, or even some family candid videos. Adding audio makes them appealing and likable. To catch a potential customer or create an emotional connection with the viewer combination of audio and video is a must. This makes the footage attractive and exceptional.

Read on to know more about the step-by-step approach how to add audio to video in Adobe Premiere Pro.

In this article

01 [How to add audio to video in Premiere Pro](#Part 1)

02 [How to adjust audio in Premiere Pro](#Part 2)

03 [Adding Audio to Video files](#Part 3)

Part 1 How to add audio to video in Premiere Pro

Some essential pointers for all would-be videographers are:

● Before you add audio to video in Premiere Pro, be ready to see your file size increase to a large extent. If you add a background score of 15MB, your total video file size will increase by the same amount of 15MB. The best way to take care of such a problem is to use additional compression techniques to get a suitable file size.

● Most videographers use lots of software tools to add audio to video professionally. One such trending software tool is the Adobe Premiere Pro. Its simple to add audio to video in Premiere Pro, edit your audio and video, and fine-tune the audio volume of each video project.

Let’s learn how.

Step1 Find out the Audio option

Navigate to the Audio workspace, select Audio at the top on the tools bar

Step2 Choose the Workspace

Click Window select Workspace click on Audio

Step3 Check toolbar

Within Audio, click on Choose Window Media Browser to show the Media Browser toolbar.

Step4 Select audio files

Go to your audio file; for Windows OS, right-click or control-click the selected audio file for macOS.

Step5 Import and add

Please select the desired audio file, then click import to add it to your Project.

An important tip is to keep the Ingest box selected if you want to copy your audio file concurrently to your project folder.

Adding audio to your series

Step1 Go to the Project panel

Select Window, click on Project to open the Project panel.

Step2 Select audio file

Click on the audio file you imported to select it.

Step3 Check the waveform

Double click the file to open it in the Source panel to check the sound and waveform.

Step4 Check sounds

Play the audio file if you want to check the audio quality, volume, and overall sound.

Step5 Add audio to the video track

Hold the left click on your mouse to drag the audio file to the series in the Timeline panel. You can add any audio file to the video track listed in the panel window in this step.

Step6 Trim audio file

Select the Trim option to trim your audio file the same way you will edit the video file in the final step.

Part 2 How to adjust audio in Premiere Pro

Now that you have understood how to add audio to video in Adobe Premier Pro. Let’s know how to adjust audio in Premier Pro.

Step1 Activate the series

Press on the spacebar to activate your series in the Program panel (appears in the top right of the panel)

Step2 Stop playback

To stop the playback, press the space bar again.

Step3 Choose starting point of playback

Press down the left mouse button to hold and drag the Blue colored play head to wherever you desire the playback to start.

If you feel the audio track is mild or too harsh compared to the rest of the audio series, change each audio track’s volume separately.

Step1 Select Audio Track Mixer

Click Window selects Audio Track Mixer from the menu.

Step2 Click the series name to see the audio mixer

Click the series name of your audio file to show the audio mixer for your series.

Step3 Choose playback to play the audio

At the bottom of the panel is the Audio Track Mixer. Click on playback to star, pause or play your audio in-ring sequence.

Step4 Click on the slider

When your audio file plays or loops, click on the slider to move up or down. It will increase or reduce the volume of each separate audio track in your audio series.

Step5 Adjust the volume

Use the slider to adjust the overall audio volume

Tips

Always keep the audio projects within the -6 to 3 dB volume range to get the best quality of the audio effect. Any lower you won’t be able to hear the sound, or if it’s higher, the sound will hurt the listeners’ ears.

Professional advice to all beginner-level videographers is that as Premiere Pro is complex so you need more straightforward tools like Filmora for all your video editing work. Filmora is easy to use and much cheaper than Premiere Pro.

You may think now why or how Filmora can be the best as an alternative on how to add audio to video using Premiere Pro. Well! It will help you to transform your video into a piece of art incredibly by offering simple drag and drop options, including an easy-to-use interface and powerful editing tools. You can:

● Edit and create your videos with minimal effort

● Get a Music Library to add comedy, fear, tension, and love to every scene

● Get several royalty-free songs and sound effects

● Create videos with up to 800 stunning effects

● Unleash your creativity with its offered Hollywood effects

● Import and export in almost any type of video format

How to use Filmora to add audio to video

Adding sound to any video file enhances its viewability and the whole experience of watching any video. To do this, you need to add audio to video. The same can be done quickly in Filmora, a 3rd-party video editing software tool now the hot favorite of amateur and professional video editors. Below we describe how to add audio to video in Filmora.

Import Media

To start the process of adding audio to video follow these steps.

Step1 Select the audio, add using the Import option or drag and select

Import selected audio using the Filmora Media Panel and add it to your timeline. You can also choose and drag the audio file from the source folder to the Media Panel. Filmora supports multiple audio file formats to ease adding audio to video. The supported audio files are MP3, M4V, MPA, WAV, WMA.

Step2 Add and make the audio file

Adding the audio file to Filmora Media Panel makes it a media asset and can now be used multiple times in future projects. The original file remains as Filmora doesn’t change the original audio file.

Step3 Copying or deleting an audio file

In Filmora, using the feature of copying or deleting an audio file, you can work on the audio and video from any computer or remote PC.

Part 3 Adding Audio to Video files

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Step1 Click on Import in the Media Panel

Select the audio and video files to import them into Filmora.

Step2 Click on the video file to add audio

Press the Ctrl key (Windows) or Cmd key (Mac OS) and click on the audio file.

Step3 Add audio to video

Right-click on the files selected and choose the Merge audio & video option to add audio to the video.

Filmora analyzes audio and video files and replaces the existing audio with the newly selected audio file. Once the synchronization process is over, the new merged file will be available in the Media Panel for future processing.

The synchronized file will have the same terminology as the original video file with a difference. It will get an extension Merged to its name.

The original file will not get affected in Filmora. This software tool only references the files to generate a new file. The new file created when you add audio to the video can now be added to the timeline and exported.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

So, this article listed how to add audio to video in Premiere Pro via a step-by-step guide. The guide lets you know the easy method of adding audio to video in Adobe Premiere Pro to all potential videographers. Thus, you can now start your journey of video edition by putting your best click forward!

Try It Free Try It Free

Look at any of the spot commercials, wedding videos, or even some family candid videos. Adding audio makes them appealing and likable. To catch a potential customer or create an emotional connection with the viewer combination of audio and video is a must. This makes the footage attractive and exceptional.

Read on to know more about the step-by-step approach how to add audio to video in Adobe Premiere Pro.

In this article

01 [How to add audio to video in Premiere Pro](#Part 1)

02 [How to adjust audio in Premiere Pro](#Part 2)

03 [Adding Audio to Video files](#Part 3)

Part 1 How to add audio to video in Premiere Pro

Some essential pointers for all would-be videographers are:

● Before you add audio to video in Premiere Pro, be ready to see your file size increase to a large extent. If you add a background score of 15MB, your total video file size will increase by the same amount of 15MB. The best way to take care of such a problem is to use additional compression techniques to get a suitable file size.

● Most videographers use lots of software tools to add audio to video professionally. One such trending software tool is the Adobe Premiere Pro. Its simple to add audio to video in Premiere Pro, edit your audio and video, and fine-tune the audio volume of each video project.

Let’s learn how.

Step1 Find out the Audio option

Navigate to the Audio workspace, select Audio at the top on the tools bar

Step2 Choose the Workspace

Click Window select Workspace click on Audio

Step3 Check toolbar

Within Audio, click on Choose Window Media Browser to show the Media Browser toolbar.

Step4 Select audio files

Go to your audio file; for Windows OS, right-click or control-click the selected audio file for macOS.

Step5 Import and add

Please select the desired audio file, then click import to add it to your Project.

An important tip is to keep the Ingest box selected if you want to copy your audio file concurrently to your project folder.

Adding audio to your series

Step1 Go to the Project panel

Select Window, click on Project to open the Project panel.

Step2 Select audio file

Click on the audio file you imported to select it.

Step3 Check the waveform

Double click the file to open it in the Source panel to check the sound and waveform.

Step4 Check sounds

Play the audio file if you want to check the audio quality, volume, and overall sound.

Step5 Add audio to the video track

Hold the left click on your mouse to drag the audio file to the series in the Timeline panel. You can add any audio file to the video track listed in the panel window in this step.

Step6 Trim audio file

Select the Trim option to trim your audio file the same way you will edit the video file in the final step.

Part 2 How to adjust audio in Premiere Pro

Now that you have understood how to add audio to video in Adobe Premier Pro. Let’s know how to adjust audio in Premier Pro.

Step1 Activate the series

Press on the spacebar to activate your series in the Program panel (appears in the top right of the panel)

Step2 Stop playback

To stop the playback, press the space bar again.

Step3 Choose starting point of playback

Press down the left mouse button to hold and drag the Blue colored play head to wherever you desire the playback to start.

If you feel the audio track is mild or too harsh compared to the rest of the audio series, change each audio track’s volume separately.

Step1 Select Audio Track Mixer

Click Window selects Audio Track Mixer from the menu.

Step2 Click the series name to see the audio mixer

Click the series name of your audio file to show the audio mixer for your series.

Step3 Choose playback to play the audio

At the bottom of the panel is the Audio Track Mixer. Click on playback to star, pause or play your audio in-ring sequence.

Step4 Click on the slider

When your audio file plays or loops, click on the slider to move up or down. It will increase or reduce the volume of each separate audio track in your audio series.

Step5 Adjust the volume

Use the slider to adjust the overall audio volume

Tips

Always keep the audio projects within the -6 to 3 dB volume range to get the best quality of the audio effect. Any lower you won’t be able to hear the sound, or if it’s higher, the sound will hurt the listeners’ ears.

Professional advice to all beginner-level videographers is that as Premiere Pro is complex so you need more straightforward tools like Filmora for all your video editing work. Filmora is easy to use and much cheaper than Premiere Pro.

You may think now why or how Filmora can be the best as an alternative on how to add audio to video using Premiere Pro. Well! It will help you to transform your video into a piece of art incredibly by offering simple drag and drop options, including an easy-to-use interface and powerful editing tools. You can:

● Edit and create your videos with minimal effort

● Get a Music Library to add comedy, fear, tension, and love to every scene

● Get several royalty-free songs and sound effects

● Create videos with up to 800 stunning effects

● Unleash your creativity with its offered Hollywood effects

● Import and export in almost any type of video format

How to use Filmora to add audio to video

Adding sound to any video file enhances its viewability and the whole experience of watching any video. To do this, you need to add audio to video. The same can be done quickly in Filmora, a 3rd-party video editing software tool now the hot favorite of amateur and professional video editors. Below we describe how to add audio to video in Filmora.

Import Media

To start the process of adding audio to video follow these steps.

Step1 Select the audio, add using the Import option or drag and select

Import selected audio using the Filmora Media Panel and add it to your timeline. You can also choose and drag the audio file from the source folder to the Media Panel. Filmora supports multiple audio file formats to ease adding audio to video. The supported audio files are MP3, M4V, MPA, WAV, WMA.

Step2 Add and make the audio file

Adding the audio file to Filmora Media Panel makes it a media asset and can now be used multiple times in future projects. The original file remains as Filmora doesn’t change the original audio file.

Step3 Copying or deleting an audio file

In Filmora, using the feature of copying or deleting an audio file, you can work on the audio and video from any computer or remote PC.

Part 3 Adding Audio to Video files

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Step1 Click on Import in the Media Panel

Select the audio and video files to import them into Filmora.

Step2 Click on the video file to add audio

Press the Ctrl key (Windows) or Cmd key (Mac OS) and click on the audio file.

Step3 Add audio to video

Right-click on the files selected and choose the Merge audio & video option to add audio to the video.

Filmora analyzes audio and video files and replaces the existing audio with the newly selected audio file. Once the synchronization process is over, the new merged file will be available in the Media Panel for future processing.

The synchronized file will have the same terminology as the original video file with a difference. It will get an extension Merged to its name.

The original file will not get affected in Filmora. This software tool only references the files to generate a new file. The new file created when you add audio to the video can now be added to the timeline and exported.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

So, this article listed how to add audio to video in Premiere Pro via a step-by-step guide. The guide lets you know the easy method of adding audio to video in Adobe Premiere Pro to all potential videographers. Thus, you can now start your journey of video edition by putting your best click forward!

Try It Free Try It Free

Look at any of the spot commercials, wedding videos, or even some family candid videos. Adding audio makes them appealing and likable. To catch a potential customer or create an emotional connection with the viewer combination of audio and video is a must. This makes the footage attractive and exceptional.

Read on to know more about the step-by-step approach how to add audio to video in Adobe Premiere Pro.

In this article

01 [How to add audio to video in Premiere Pro](#Part 1)

02 [How to adjust audio in Premiere Pro](#Part 2)

03 [Adding Audio to Video files](#Part 3)

Part 1 How to add audio to video in Premiere Pro

Some essential pointers for all would-be videographers are:

● Before you add audio to video in Premiere Pro, be ready to see your file size increase to a large extent. If you add a background score of 15MB, your total video file size will increase by the same amount of 15MB. The best way to take care of such a problem is to use additional compression techniques to get a suitable file size.

● Most videographers use lots of software tools to add audio to video professionally. One such trending software tool is the Adobe Premiere Pro. Its simple to add audio to video in Premiere Pro, edit your audio and video, and fine-tune the audio volume of each video project.

Let’s learn how.

Step1 Find out the Audio option

Navigate to the Audio workspace, select Audio at the top on the tools bar

Step2 Choose the Workspace

Click Window select Workspace click on Audio

Step3 Check toolbar

Within Audio, click on Choose Window Media Browser to show the Media Browser toolbar.

Step4 Select audio files

Go to your audio file; for Windows OS, right-click or control-click the selected audio file for macOS.

Step5 Import and add

Please select the desired audio file, then click import to add it to your Project.

An important tip is to keep the Ingest box selected if you want to copy your audio file concurrently to your project folder.

Adding audio to your series

Step1 Go to the Project panel

Select Window, click on Project to open the Project panel.

Step2 Select audio file

Click on the audio file you imported to select it.

Step3 Check the waveform

Double click the file to open it in the Source panel to check the sound and waveform.

Step4 Check sounds

Play the audio file if you want to check the audio quality, volume, and overall sound.

Step5 Add audio to the video track

Hold the left click on your mouse to drag the audio file to the series in the Timeline panel. You can add any audio file to the video track listed in the panel window in this step.

Step6 Trim audio file

Select the Trim option to trim your audio file the same way you will edit the video file in the final step.

Part 2 How to adjust audio in Premiere Pro

Now that you have understood how to add audio to video in Adobe Premier Pro. Let’s know how to adjust audio in Premier Pro.

Step1 Activate the series

Press on the spacebar to activate your series in the Program panel (appears in the top right of the panel)

Step2 Stop playback

To stop the playback, press the space bar again.

Step3 Choose starting point of playback

Press down the left mouse button to hold and drag the Blue colored play head to wherever you desire the playback to start.

If you feel the audio track is mild or too harsh compared to the rest of the audio series, change each audio track’s volume separately.

Step1 Select Audio Track Mixer

Click Window selects Audio Track Mixer from the menu.

Step2 Click the series name to see the audio mixer

Click the series name of your audio file to show the audio mixer for your series.

Step3 Choose playback to play the audio

At the bottom of the panel is the Audio Track Mixer. Click on playback to star, pause or play your audio in-ring sequence.

Step4 Click on the slider

When your audio file plays or loops, click on the slider to move up or down. It will increase or reduce the volume of each separate audio track in your audio series.

Step5 Adjust the volume

Use the slider to adjust the overall audio volume

Tips

Always keep the audio projects within the -6 to 3 dB volume range to get the best quality of the audio effect. Any lower you won’t be able to hear the sound, or if it’s higher, the sound will hurt the listeners’ ears.

Professional advice to all beginner-level videographers is that as Premiere Pro is complex so you need more straightforward tools like Filmora for all your video editing work. Filmora is easy to use and much cheaper than Premiere Pro.

You may think now why or how Filmora can be the best as an alternative on how to add audio to video using Premiere Pro. Well! It will help you to transform your video into a piece of art incredibly by offering simple drag and drop options, including an easy-to-use interface and powerful editing tools. You can:

● Edit and create your videos with minimal effort

● Get a Music Library to add comedy, fear, tension, and love to every scene

● Get several royalty-free songs and sound effects

● Create videos with up to 800 stunning effects

● Unleash your creativity with its offered Hollywood effects

● Import and export in almost any type of video format

How to use Filmora to add audio to video

Adding sound to any video file enhances its viewability and the whole experience of watching any video. To do this, you need to add audio to video. The same can be done quickly in Filmora, a 3rd-party video editing software tool now the hot favorite of amateur and professional video editors. Below we describe how to add audio to video in Filmora.

Import Media

To start the process of adding audio to video follow these steps.

Step1 Select the audio, add using the Import option or drag and select

Import selected audio using the Filmora Media Panel and add it to your timeline. You can also choose and drag the audio file from the source folder to the Media Panel. Filmora supports multiple audio file formats to ease adding audio to video. The supported audio files are MP3, M4V, MPA, WAV, WMA.

Step2 Add and make the audio file

Adding the audio file to Filmora Media Panel makes it a media asset and can now be used multiple times in future projects. The original file remains as Filmora doesn’t change the original audio file.

Step3 Copying or deleting an audio file

In Filmora, using the feature of copying or deleting an audio file, you can work on the audio and video from any computer or remote PC.

Part 3 Adding Audio to Video files

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Using Filmora, it is easy to sync or add audio to the video, which is separately recorded and stored on your device.

Step1 Click on Import in the Media Panel

Select the audio and video files to import them into Filmora.

Step2 Click on the video file to add audio

Press the Ctrl key (Windows) or Cmd key (Mac OS) and click on the audio file.

Step3 Add audio to video

Right-click on the files selected and choose the Merge audio & video option to add audio to the video.

Filmora analyzes audio and video files and replaces the existing audio with the newly selected audio file. Once the synchronization process is over, the new merged file will be available in the Media Panel for future processing.

The synchronized file will have the same terminology as the original video file with a difference. It will get an extension Merged to its name.

The original file will not get affected in Filmora. This software tool only references the files to generate a new file. The new file created when you add audio to the video can now be added to the timeline and exported.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

So, this article listed how to add audio to video in Premiere Pro via a step-by-step guide. The guide lets you know the easy method of adding audio to video in Adobe Premiere Pro to all potential videographers. Thus, you can now start your journey of video edition by putting your best click forward!

Balancing Act: Techniques for Achieving Even Loudness in DaVinci Resolve

How To Normalize Audio In DaVinci Resolve

It happens a lot of times that we are not satisfied with several details our videos and audios contain, and we need to edit them. One of the most common problems we face is that our volumes are not normalized, and we need to take some extra time in order to achieve the best result for our audiences. Even with little or no knowledge about this very specific topic, we need to inform ourselves and find the solutions, make our videos more watch-able and our audios more listen-able, so to say.

There are several ways the audio normalization is achieved. One type is called peak normalization, helping adjust the recording based on the highest signal level present in the recording; the second is loudness normalization, adjusting the recording based on perceived loudness. RMS (Root-Mean-Square) changes the value of all the samples, where their average electrical volume overall is a specified level.

Mostly, there are two reasons why we should give audio normalization a try. You need to decide yourself, what is your reason and expected outcome when you use audio normalization. First is when your aim is to get the maximum volume, but the second boils down to matching different volumes with each other.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

More concretely, in general, audio normalization is when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, “the norm” for the project. It means that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

You can have the desired result using different kinds of software. Nowadays, a lot of programs offer you the tool which facilitates this process. So, one of them would be DaVinci Resolve, which we are going to discuss in this article.

What is DaVinci Resolve? The description goes: “DaVinci Resolve is the world’s only solution that combines editing, color correction, visual effects, motion graphics and audio post production all in one software tool!” so, let’s discover what this software can do to help us balance the audio!

So, how to balance your audio in DaVinci Resolve? We are going to discuss everything step by step – how to set your target loudness level, how to monitor the loudness, and how you can use the automation feature.

Well, of course, have the program installed and opened. Then, add your video with the audio you want to edit or the audio separately, if that’s what you are aiming to do.

The first step you need to make is to set your target loudness level – for this, find the little settings button on the right bottom of the program and click on it. Now, go down to the Fairlight menu and change the Target Loudness Level. If you are doing the audio normalization for the Youtube content, then it is recommended to set it to -14 LUFS.

Next, you are going to head to the Fairlight page and make sure that your meters are open. the loudness meter is on the right top of the layout of the program, and it goes from +9 to -15 LUFS.

Here, zero represents exactly what our target loudness level is, in this case, as you remember, we set it to -14 LUFS. So, ensure that our loudness is as close as zero as possible on the meter, but you can also make it lower, such as -3. Whenever you play, you will be able to see that there are some numbers popping up to the right of the meter.

The first one, you’ll find, is Short – constantly changing, indicating how far above or below the target loudness level you are at a given time. Short Max tells you how far above or below your target loudness level the loudest point of your video is. Range is a measure of your quietest pick to your loudest peak, and the last one is Integrated – it gives you the overall loudness of your video in relation to your target loudness level. Integrated is the number we aim to keep around -3 or 0.

We can use our main slider (next to the sequence on the right) to make our video louder or quieter until we hit that target loudness level.

Also, there is an automation tool that can help you dial in your loudness. In order to access this feature, find a red icon, looking like a wave with kind of a key frames.

Next, open up your Index (on the far top panel, a little bit from the left), and make sure you are in the tracks menu in your editing index.

What you want to do is to make your main track visible on the timeline, so hit on the eyeball next to your main and go to your timeline, where you will expand your main track until you see your Loudness History options.

Here, you will need to check in the box next to Integrated and turn on the Loudness History. This will show the integrated loudness level, adjust your main track’s volume accordingly, so you are below the zero line. And, that’s actually it!

How to normalize audio in Wondershare Filmora X?

Even though doing this with the help of DaVinci Resolve is really helpful, and, let’s say, sophisticated, you might find it a little complicated, in case you were not so familiar with video/audio editing. So, we would like you to have some information about what alternative you can turn to, and in this case, it’s worth bringing up a software - Wondershare Filmora X . With it, you will find that the same task can be carried out wonderfully. It is also a video editor, but it is one of the easiest to use in the word, supported by Mac and Windows. Filmora offers a great, neat, user-friendly interface, and helps you understand the very basics of editing. Actually, it has not been long since Wondershare Filmora X introduced the feature to normalize the audio. So, you might want download the latest version of Filmora X and start following along the steps we are going to provide for you to understand how audio normalization works on Filmora X .

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!

So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!

Free Download For macOS 10.14 or later

After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!

So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!

Also read: