2024 Approved Normalizing Volume in VLC A Step-by-Step Guide

Normalizing Volume in VLC: A Step-by-Step Guide

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Free Download For macOS 10.14 or later

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Top 10 Song Recorder That You Won’t Want to Miss

Who doesn’t like to listen to songs? Who doesn’t enjoy listening to songs? Everyone listens to music and songs of various genres because they relax and soothe us at different levels. Sometimes pop hip-hop is what we are looking to relax, whereas sometimes, slow, rhythmic music is what we are looking for to grant us comfort.

The only factor that might bother you at any point is your internet connection. You cannot always listen to songs on the internet. For this reason, we download songs. Some platforms do not allow you to download songs; song recording software is needed for such cases. If you plan to learn about song recorders, then let us start.

Part 1. 10 Best Song Recorder to Capture Your Favorite Song Easily

Songs that can’t be downloaded can be recorded so that you can easily enjoy them even if you are offline. The process of recording songs is not at all problematic but selecting the correct song recorder is essential. Not every song recording software delivers quality recordings.

If ‘how to record a song at home’ is the question that’s bothering you and additionally you want to learn about 10 song recorders that are best and guarantee quality recordings, then stay with us.

1. MixPad

The very first song recording software is MixPad. With this platform, audio processing and mixing have become a lot easier than before. The interface of this software is very smart visually and sleek in design.

An amazing thing about MixPad is that it supports cloud storage. The biggest advantage of using cloud storage is that the users’ work is always safe. The users’ data is secure and far from any kind of data loss. Some more features of MixPad are:

You can import any sound format with perfection because MixPad supports almost all sound formats.
MixPad allows the simultaneous mixing of an unlimited number of tracks.
The best thing about MixPad is that its latency rate is very low.

2. FLStudio

Another song recording software that could be used to record songs to enjoy them later is FL Studio. With this software, you can easily compose, edit, mix and also record songs. Its amazing nature lets you create sound patterns and sequencing.

FL Studio has a flexible interface as the user can adjust and resize the interface. The recording software is very easy to use. Along with that, it is very lightweight. Let us share some more features of FLStudio:

FL Studio includes a lot of plugins. Approximately it includes more than 80.
The song recordersupports both Windows and Mac.
The software also supports MIDI (Musical Instrument Digital Interface).
The users receive free updates for FL Studio. It is also highly customizable.

3. Leawo Music Recorder

With Leawo Music Recorder, you can record your favorite songs. The tool has a lot more than just recording like it contains a task scheduler, recording album, cover finder, etc. Using a Leawo recorder, you can record songs from various platforms like YouTube, AOL Music, and many others.

The best part of Leawo recording software is that you can record with the mic as well as with the other built-in input audio. Some more features of the Leawo music recorder are:

By using the Task Scheduler, you can record your songs and set the start and end duration.
Leawo Music Recorder only supports Windows.
You can easily manage the recorded song file and also edit it accordingly.

4. GilliSoft Audio Recorder Pro

By using Gillisoft Audio Recorder, you can easily record songs from various platforms like YouTube, Pandora, and other streaming audio websites. The software allows time-triggered recording. In case you want to learn more about the Gilisoft Audio Recorder, then here are its features:

With Gilisoft recorder, you can save the files in WAV, MP3, OGG, or WMA files.
The reordered songs can be played on a PC, MP3 player, or the car’s audio system.
The streaming audio recorder is connected directly to the sound card. With this, you can record perfect voices.

5. WavePad

Another very powerful song recorder where even beginners can work easily is WavePad. The layout and the interface of the software are very smooth, intuitive and it encourages a good workflow. WavePad allows you to customize the toolbar. Let us share with you the features of WavePad:

WavePad has a lot of different effects and filters that could be used and added to your recorded song.
With WavePad, you can also convert the file format to another file format that’s viable with your gear.
The software allows you to trim, edit, mix, remove extra background noise, etc.

6. Audacity

The software where songs could be recorded for free is Audacity. The software is being used professionally. With Audacity, you can also check that whether you can share your recording on various platforms or not. The song recording software promises to deliver high-quality results. Some more features of this software are:

The Audacity program is portable. It could be used for pitch correction.
The song recorderis free of ads which helps to provide hassle-free work.
Another amazing thing about Audacity software is the support for the VST plugin.

7. Windows Voice Recorder

This song recording software is merely for Windows users. This is the default recording software designed for Windows operating system by Microsoft. The precious name was Sound Recorder. In the coming part, we will share its features with you:

After you have completely recorded the song, it grants you the very basic tools to edit your recording.
In your recorded song, you can add markers to identify some special moments.
As Windows Voice Recorder is the default recorder for Windows operating system, so it is free.

8. Apple GarageBand

Apple GarageBand is another brilliant song recording software. The software is not just a recorder; but instead, it is also a musical workstation. The available effects can be used and added to your songs to make new and unique musical numbers. It has crazy impressive features that are shared below:

The software is completely free to work with.
Apple GarageBand has a very intuitive and modern user interface.
The software is very strong as music can be created without instruments.

9. Adobe Audition

One of the best things about Adobe Audition is that it is a very advanced program when it comes to song recording on this software. This tool is used by professionals. They even recommend this software to beginners so that they can learn and work perfectly. Let us highlight more of its features:

The song recording platform can also be used to create brilliant podcasts.
With Adobe Audition, you can integrate the song recording with the music clips and make it more professional.
The song recording softwareincludes multi-track, wave editing, and lastly, audio restoration.

10. Apowersoft Streaming Audio Recorder

Last but not least, let us talk about the Apowersoft Streaming Audio Recorder. This is the best song recorder. With Apowersoft recorder, you can convert the format of the audio to device-compatible format. The recorder offers a lot of practical functions. It has some fascinating features that are given below.

The recorder supports various file formats like MP3, WMA, M4A, and others.
The most fantastic feature of Apowersoft Streaming Audio Recorder is its auto addition of ID3 tags for your music file.
The recorder has the easiest interface. It promises to record and always deliver songs of high quality.

Final Words

The article above is all you need in today’s world, where you cannot survive without songs. Even if you don’t have internet access, you can still enjoy offline songs. This all is possible if you use good song recording software. In this article, we shared 10 different and best recording software for this purpose.

2. FLStudio

FL Studio includes a lot of plugins. Approximately it includes more than 80.
The song recordersupports both Windows and Mac.
The software also supports MIDI (Musical Instrument Digital Interface).
The users receive free updates for FL Studio. It is also highly customizable.