How to Record Voice on Mac? Easy-to-Use Guide

Mac offers a smooth workflow compared to Windows, which is why people prefer its usage. If your work revolves around music production, podcasts, recorded lectures in a classroom, and audio mixing, it is important to have workable audio recording software for Mac. To record Mac audio through an easy set of procedures, follow the write-up.

We shall also introduce five voice recorders, Mac. So, let us begin!

In this article

01 How to Record Audio on Mac?

02 5 Best Voice Recorder Software for Mac

Part 1: How to Record Audio on Mac?

If you are a Mac user, this sub-section has been designed for you. If you are taking a voice class or an influencer interview, you need to know Mac how to record audio. The two strategies would be covered to record voice on Mac. Let us start!

Via Voice Memos

Voice Memos is an in-built app on most Apple devices. The guidelines to record sound on Mac through Voice Memos are as given below:

Step 1: Visiting Voice Memos

Launch Voice Memos from your Mac. As the interface appears, the user would be welcomed with the “Red” record button. Tap on it, and the recording would start without any prompt.

Step 2: Pausing the Recording

The lower-left corner displays the pause button. Click on it once you are done. Essentially, you can have a little preview of what you have covered so far.

Step 3: Saving Process

Click on “Done,” located in the bottom right corner. Rename the file and get done with the process.

Via QuickTime Player

QuickTime Player is the default program in Mac that acts as both media player and voice recorder. To know how to record internal audio Mac, let us walk you through the multiple steps. You’ll surely get something good out of it!

Step 1: Starting the Recording

For starters, launch QuickTime Player and navigate to the “File” located in the top panel. Select “New Audio Recording” from there. Click on the “Red” button to initiate the recording.

Step 2: Stopping the Recording

Once you are done with the recording, click on the grey square to stop the recording. There is no option to pause the recording temporarily.

Step 3: Saving the Recording

Navigate to the “File” tab again and click on “Save.” Choose the name of the recording and the output folder source.

Part 2: 5 Best Voice Recorder Software for Mac

Now that you have an idea of the procedure to record an internal audio recorder Mac let us shift our focus to audio recording software for Mac. The choice of the tool helps the user be productive at the workplace. Therefore, we have sketched out five MacBook voice recorders with their key features. Let us have a peek!

Apple GarageBand

As a digital audio workstation, Apple GarageBand has to be your first choice for music production. It is a fully-fledged audio recorder with an easy-to-use interface. The sound and loop library allows you to edit your tracks. Moreover, the interactive interface makes its usage easy for beginners.

Are you impressed with the tool? Following are some features of this audio recording software for Mac:

• Apple GarageBand comes up with a drag and drop process to make recording easy.
• Offering an extensive range of effects and virtual amps, Apple GarageBand supports MIDI recording and editing.
• The tool offers a professional environment for all music and audio recording services, free of cost.

Audacity

Another software to record system audio Mac is Audacity creating a healthy addition to the media fraternity. Acting as a multi-track editor, Audacity supports 24, 16, and 32 bit sound qualities for a better editing system. It is a free audio recording program with great sound quality and tons of effects. The advanced effects include voice generation, noise removal, and track-based management.

Quite good, right? The additional features of Audacity are as given below:

• Audacity works like a charm for pitch correction.
• There are enhanced highly customizable editing tools.
• You can also visualize selected frequencies and offers effective plugins.

WavePad

Changing the narrative of voice recorders in the market and ensuring high-quality audio, WavePad has got you all covered. The sound editing tools comprise cutting, copying, inserting, silencing, auto-trimming, pitch shifting, and much more. Moreover, this audio recording software for Mac has DirectX and Virtual Studio Technology (VST) plugin support to bring more advancement to the process.

Following are some extraordinary characteristics of WavePad. You will be surprised!

• The audio enhancing compatibilities include amplification and effects added.
• WavePad gives the user a certain control over their work domain.
• With an easy-to-use interface, the advanced tools include spectral analysis (FTT), speech synthesis, and voice changer.

MixPad

Allow me to introduce you to another voice recorder Mac that also handles multi-track mixing like a pro. An exclusive beat maker, music library, and supports VST plugin, MixPad can be relied upon for adding different audio effects. The effects include equalization, compression, and reverb. More importantly, it has a low latency rate and supports cloud storage impeccably.

Following are some detailed key features of MixPad audio recording software for Mac. See the best out of it!

• The multiple or single track can be processed simultaneously, thus enhancing the user experience and productivity at the workplace.
• The program works effectively with all formats, which makes importing easy and free of complications.
• The MIDI Editor is presented, and the audio output can be uploaded to YouTube, Soundcloud, Dropbox, and Google Drive.

Ocenaudio

Bringing innovation in business and acting as a voice recorder and editor, Ocenaudio needs no introduction. The users prefer this tool to record Mac audio while editing and analyzing the audio files like an expert. The real-time preview of effects helps you decide easily without getting confused in the process. Ocenaudio is your last resort for the standardization of audio files.

To have a quick peek at the exceptional features of Ocenaudio, follow our lead. You won’t be disappointed!

• The Ocen framework is integrated with Ocenaudio to have access to enhanced capabilities.
• The auto-trim and voice recording controls help beginners and professionals work more confidently.
• The software offers a waveform view without any restriction on the audio size.

The Bottom Line

The article did an impeccable job explaining five popular audio recording software for Mac that record Mac audio like a pro. Their key traits were also described to help the stakeholders make a conscious decision. The procedure to record voice on Mac was also provided through two strategies. Got the point, right?

Wondershare Filmora is the right choice when it comes to audio editing. The functions and features it offers make the process frictionless and effortless. For instance, you can add effects and music to the audio without any hesitation. The “Adjust Audio” functionality helps adjust the audio’s volume. You can also get rid of the background noise through “Audio Denoise.”

Moreover, the “Audio Ducking” feature lowers the background volume so that the dialogues can be heard more perfectly. The “Split Audio” splits the audio into different sections. You can also use the “Audio Mixer” to fine-tune the audio of your project easily. Review the different features and invest in the right software to have all required features under one platform.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

02 5 Best Voice Recorder Software for Mac

Part 1: How to Record Audio on Mac?

If you are a Mac user, this sub-section has been designed for you. If you are taking a voice class or an influencer interview, you need to know Mac how to record audio. The two strategies would be covered to record voice on Mac. Let us start!

Via Voice Memos

Voice Memos is an in-built app on most Apple devices. The guidelines to record sound on Mac through Voice Memos are as given below:

Step 1: Visiting Voice Memos

Launch Voice Memos from your Mac. As the interface appears, the user would be welcomed with the “Red” record button. Tap on it, and the recording would start without any prompt.

Step 2: Pausing the Recording

The lower-left corner displays the pause button. Click on it once you are done. Essentially, you can have a little preview of what you have covered so far.

Step 3: Saving Process

Click on “Done,” located in the bottom right corner. Rename the file and get done with the process.

Via QuickTime Player

QuickTime Player is the default program in Mac that acts as both media player and voice recorder. To know how to record internal audio Mac, let us walk you through the multiple steps. You’ll surely get something good out of it!

Step 1: Starting the Recording

For starters, launch QuickTime Player and navigate to the “File” located in the top panel. Select “New Audio Recording” from there. Click on the “Red” button to initiate the recording.

Step 2: Stopping the Recording

Once you are done with the recording, click on the grey square to stop the recording. There is no option to pause the recording temporarily.

Step 3: Saving the Recording

Navigate to the “File” tab again and click on “Save.” Choose the name of the recording and the output folder source.

Part 2: 5 Best Voice Recorder Software for Mac

Now that you have an idea of the procedure to record an internal audio recorder Mac let us shift our focus to audio recording software for Mac. The choice of the tool helps the user be productive at the workplace. Therefore, we have sketched out five MacBook voice recorders with their key features. Let us have a peek!

Apple GarageBand

As a digital audio workstation, Apple GarageBand has to be your first choice for music production. It is a fully-fledged audio recorder with an easy-to-use interface. The sound and loop library allows you to edit your tracks. Moreover, the interactive interface makes its usage easy for beginners.

Are you impressed with the tool? Following are some features of this audio recording software for Mac:

• Apple GarageBand comes up with a drag and drop process to make recording easy.
• Offering an extensive range of effects and virtual amps, Apple GarageBand supports MIDI recording and editing.
• The tool offers a professional environment for all music and audio recording services, free of cost.

Audacity

Another software to record system audio Mac is Audacity creating a healthy addition to the media fraternity. Acting as a multi-track editor, Audacity supports 24, 16, and 32 bit sound qualities for a better editing system. It is a free audio recording program with great sound quality and tons of effects. The advanced effects include voice generation, noise removal, and track-based management.

Quite good, right? The additional features of Audacity are as given below:

• Audacity works like a charm for pitch correction.
• There are enhanced highly customizable editing tools.
• You can also visualize selected frequencies and offers effective plugins.

WavePad

Changing the narrative of voice recorders in the market and ensuring high-quality audio, WavePad has got you all covered. The sound editing tools comprise cutting, copying, inserting, silencing, auto-trimming, pitch shifting, and much more. Moreover, this audio recording software for Mac has DirectX and Virtual Studio Technology (VST) plugin support to bring more advancement to the process.

Following are some extraordinary characteristics of WavePad. You will be surprised!

• The audio enhancing compatibilities include amplification and effects added.
• WavePad gives the user a certain control over their work domain.
• With an easy-to-use interface, the advanced tools include spectral analysis (FTT), speech synthesis, and voice changer.

MixPad

Allow me to introduce you to another voice recorder Mac that also handles multi-track mixing like a pro. An exclusive beat maker, music library, and supports VST plugin, MixPad can be relied upon for adding different audio effects. The effects include equalization, compression, and reverb. More importantly, it has a low latency rate and supports cloud storage impeccably.

Following are some detailed key features of MixPad audio recording software for Mac. See the best out of it!

• The multiple or single track can be processed simultaneously, thus enhancing the user experience and productivity at the workplace.
• The program works effectively with all formats, which makes importing easy and free of complications.
• The MIDI Editor is presented, and the audio output can be uploaded to YouTube, Soundcloud, Dropbox, and Google Drive.

Ocenaudio

Bringing innovation in business and acting as a voice recorder and editor, Ocenaudio needs no introduction. The users prefer this tool to record Mac audio while editing and analyzing the audio files like an expert. The real-time preview of effects helps you decide easily without getting confused in the process. Ocenaudio is your last resort for the standardization of audio files.

To have a quick peek at the exceptional features of Ocenaudio, follow our lead. You won’t be disappointed!

• The Ocen framework is integrated with Ocenaudio to have access to enhanced capabilities.
• The auto-trim and voice recording controls help beginners and professionals work more confidently.
• The software offers a waveform view without any restriction on the audio size.

The Bottom Line

The article did an impeccable job explaining five popular audio recording software for Mac that record Mac audio like a pro. Their key traits were also described to help the stakeholders make a conscious decision. The procedure to record voice on Mac was also provided through two strategies. Got the point, right?

Wondershare Filmora is the right choice when it comes to audio editing. The functions and features it offers make the process frictionless and effortless. For instance, you can add effects and music to the audio without any hesitation. The “Adjust Audio” functionality helps adjust the audio’s volume. You can also get rid of the background noise through “Audio Denoise.”

Moreover, the “Audio Ducking” feature lowers the background volume so that the dialogues can be heard more perfectly. The “Split Audio” splits the audio into different sections. You can also use the “Audio Mixer” to fine-tune the audio of your project easily. Review the different features and invest in the right software to have all required features under one platform.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

02 5 Best Voice Recorder Software for Mac

Part 1: How to Record Audio on Mac?

If you are a Mac user, this sub-section has been designed for you. If you are taking a voice class or an influencer interview, you need to know Mac how to record audio. The two strategies would be covered to record voice on Mac. Let us start!

Via Voice Memos

Voice Memos is an in-built app on most Apple devices. The guidelines to record sound on Mac through Voice Memos are as given below:

Step 1: Visiting Voice Memos

Launch Voice Memos from your Mac. As the interface appears, the user would be welcomed with the “Red” record button. Tap on it, and the recording would start without any prompt.

Step 2: Pausing the Recording

The lower-left corner displays the pause button. Click on it once you are done. Essentially, you can have a little preview of what you have covered so far.

Step 3: Saving Process

Click on “Done,” located in the bottom right corner. Rename the file and get done with the process.

Via QuickTime Player

QuickTime Player is the default program in Mac that acts as both media player and voice recorder. To know how to record internal audio Mac, let us walk you through the multiple steps. You’ll surely get something good out of it!

Step 1: Starting the Recording

For starters, launch QuickTime Player and navigate to the “File” located in the top panel. Select “New Audio Recording” from there. Click on the “Red” button to initiate the recording.

Step 2: Stopping the Recording

Once you are done with the recording, click on the grey square to stop the recording. There is no option to pause the recording temporarily.

Step 3: Saving the Recording

Navigate to the “File” tab again and click on “Save.” Choose the name of the recording and the output folder source.

Part 2: 5 Best Voice Recorder Software for Mac

Now that you have an idea of the procedure to record an internal audio recorder Mac let us shift our focus to audio recording software for Mac. The choice of the tool helps the user be productive at the workplace. Therefore, we have sketched out five MacBook voice recorders with their key features. Let us have a peek!

Apple GarageBand

As a digital audio workstation, Apple GarageBand has to be your first choice for music production. It is a fully-fledged audio recorder with an easy-to-use interface. The sound and loop library allows you to edit your tracks. Moreover, the interactive interface makes its usage easy for beginners.

Are you impressed with the tool? Following are some features of this audio recording software for Mac:

• Apple GarageBand comes up with a drag and drop process to make recording easy.
• Offering an extensive range of effects and virtual amps, Apple GarageBand supports MIDI recording and editing.
• The tool offers a professional environment for all music and audio recording services, free of cost.

Audacity

Another software to record system audio Mac is Audacity creating a healthy addition to the media fraternity. Acting as a multi-track editor, Audacity supports 24, 16, and 32 bit sound qualities for a better editing system. It is a free audio recording program with great sound quality and tons of effects. The advanced effects include voice generation, noise removal, and track-based management.

Quite good, right? The additional features of Audacity are as given below:

• Audacity works like a charm for pitch correction.
• There are enhanced highly customizable editing tools.
• You can also visualize selected frequencies and offers effective plugins.

WavePad

Changing the narrative of voice recorders in the market and ensuring high-quality audio, WavePad has got you all covered. The sound editing tools comprise cutting, copying, inserting, silencing, auto-trimming, pitch shifting, and much more. Moreover, this audio recording software for Mac has DirectX and Virtual Studio Technology (VST) plugin support to bring more advancement to the process.

Following are some extraordinary characteristics of WavePad. You will be surprised!

• The audio enhancing compatibilities include amplification and effects added.
• WavePad gives the user a certain control over their work domain.
• With an easy-to-use interface, the advanced tools include spectral analysis (FTT), speech synthesis, and voice changer.

MixPad

Allow me to introduce you to another voice recorder Mac that also handles multi-track mixing like a pro. An exclusive beat maker, music library, and supports VST plugin, MixPad can be relied upon for adding different audio effects. The effects include equalization, compression, and reverb. More importantly, it has a low latency rate and supports cloud storage impeccably.

Following are some detailed key features of MixPad audio recording software for Mac. See the best out of it!

• The multiple or single track can be processed simultaneously, thus enhancing the user experience and productivity at the workplace.
• The program works effectively with all formats, which makes importing easy and free of complications.
• The MIDI Editor is presented, and the audio output can be uploaded to YouTube, Soundcloud, Dropbox, and Google Drive.

Ocenaudio

Bringing innovation in business and acting as a voice recorder and editor, Ocenaudio needs no introduction. The users prefer this tool to record Mac audio while editing and analyzing the audio files like an expert. The real-time preview of effects helps you decide easily without getting confused in the process. Ocenaudio is your last resort for the standardization of audio files.

To have a quick peek at the exceptional features of Ocenaudio, follow our lead. You won’t be disappointed!

• The Ocen framework is integrated with Ocenaudio to have access to enhanced capabilities.
• The auto-trim and voice recording controls help beginners and professionals work more confidently.
• The software offers a waveform view without any restriction on the audio size.

The Bottom Line

The article did an impeccable job explaining five popular audio recording software for Mac that record Mac audio like a pro. Their key traits were also described to help the stakeholders make a conscious decision. The procedure to record voice on Mac was also provided through two strategies. Got the point, right?

Wondershare Filmora is the right choice when it comes to audio editing. The functions and features it offers make the process frictionless and effortless. For instance, you can add effects and music to the audio without any hesitation. The “Adjust Audio” functionality helps adjust the audio’s volume. You can also get rid of the background noise through “Audio Denoise.”

Moreover, the “Audio Ducking” feature lowers the background volume so that the dialogues can be heard more perfectly. The “Split Audio” splits the audio into different sections. You can also use the “Audio Mixer” to fine-tune the audio of your project easily. Review the different features and invest in the right software to have all required features under one platform.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

02 5 Best Voice Recorder Software for Mac

Part 1: How to Record Audio on Mac?

If you are a Mac user, this sub-section has been designed for you. If you are taking a voice class or an influencer interview, you need to know Mac how to record audio. The two strategies would be covered to record voice on Mac. Let us start!

Via Voice Memos

Voice Memos is an in-built app on most Apple devices. The guidelines to record sound on Mac through Voice Memos are as given below:

Step 1: Visiting Voice Memos

Launch Voice Memos from your Mac. As the interface appears, the user would be welcomed with the “Red” record button. Tap on it, and the recording would start without any prompt.

Step 2: Pausing the Recording

The lower-left corner displays the pause button. Click on it once you are done. Essentially, you can have a little preview of what you have covered so far.

Step 3: Saving Process

Click on “Done,” located in the bottom right corner. Rename the file and get done with the process.

Via QuickTime Player

QuickTime Player is the default program in Mac that acts as both media player and voice recorder. To know how to record internal audio Mac, let us walk you through the multiple steps. You’ll surely get something good out of it!

Step 1: Starting the Recording

For starters, launch QuickTime Player and navigate to the “File” located in the top panel. Select “New Audio Recording” from there. Click on the “Red” button to initiate the recording.

Step 2: Stopping the Recording

Once you are done with the recording, click on the grey square to stop the recording. There is no option to pause the recording temporarily.

Step 3: Saving the Recording

Navigate to the “File” tab again and click on “Save.” Choose the name of the recording and the output folder source.

Part 2: 5 Best Voice Recorder Software for Mac

Now that you have an idea of the procedure to record an internal audio recorder Mac let us shift our focus to audio recording software for Mac. The choice of the tool helps the user be productive at the workplace. Therefore, we have sketched out five MacBook voice recorders with their key features. Let us have a peek!

Apple GarageBand

As a digital audio workstation, Apple GarageBand has to be your first choice for music production. It is a fully-fledged audio recorder with an easy-to-use interface. The sound and loop library allows you to edit your tracks. Moreover, the interactive interface makes its usage easy for beginners.

Are you impressed with the tool? Following are some features of this audio recording software for Mac:

• Apple GarageBand comes up with a drag and drop process to make recording easy.
• Offering an extensive range of effects and virtual amps, Apple GarageBand supports MIDI recording and editing.
• The tool offers a professional environment for all music and audio recording services, free of cost.

Audacity

Another software to record system audio Mac is Audacity creating a healthy addition to the media fraternity. Acting as a multi-track editor, Audacity supports 24, 16, and 32 bit sound qualities for a better editing system. It is a free audio recording program with great sound quality and tons of effects. The advanced effects include voice generation, noise removal, and track-based management.

Quite good, right? The additional features of Audacity are as given below:

• Audacity works like a charm for pitch correction.
• There are enhanced highly customizable editing tools.
• You can also visualize selected frequencies and offers effective plugins.

WavePad

Changing the narrative of voice recorders in the market and ensuring high-quality audio, WavePad has got you all covered. The sound editing tools comprise cutting, copying, inserting, silencing, auto-trimming, pitch shifting, and much more. Moreover, this audio recording software for Mac has DirectX and Virtual Studio Technology (VST) plugin support to bring more advancement to the process.

Following are some extraordinary characteristics of WavePad. You will be surprised!

• The audio enhancing compatibilities include amplification and effects added.
• WavePad gives the user a certain control over their work domain.
• With an easy-to-use interface, the advanced tools include spectral analysis (FTT), speech synthesis, and voice changer.

MixPad

Allow me to introduce you to another voice recorder Mac that also handles multi-track mixing like a pro. An exclusive beat maker, music library, and supports VST plugin, MixPad can be relied upon for adding different audio effects. The effects include equalization, compression, and reverb. More importantly, it has a low latency rate and supports cloud storage impeccably.

Following are some detailed key features of MixPad audio recording software for Mac. See the best out of it!

• The multiple or single track can be processed simultaneously, thus enhancing the user experience and productivity at the workplace.
• The program works effectively with all formats, which makes importing easy and free of complications.
• The MIDI Editor is presented, and the audio output can be uploaded to YouTube, Soundcloud, Dropbox, and Google Drive.

Ocenaudio

Bringing innovation in business and acting as a voice recorder and editor, Ocenaudio needs no introduction. The users prefer this tool to record Mac audio while editing and analyzing the audio files like an expert. The real-time preview of effects helps you decide easily without getting confused in the process. Ocenaudio is your last resort for the standardization of audio files.

To have a quick peek at the exceptional features of Ocenaudio, follow our lead. You won’t be disappointed!

• The Ocen framework is integrated with Ocenaudio to have access to enhanced capabilities.
• The auto-trim and voice recording controls help beginners and professionals work more confidently.
• The software offers a waveform view without any restriction on the audio size.

The Bottom Line

The article did an impeccable job explaining five popular audio recording software for Mac that record Mac audio like a pro. Their key traits were also described to help the stakeholders make a conscious decision. The procedure to record voice on Mac was also provided through two strategies. Got the point, right?

Wondershare Filmora is the right choice when it comes to audio editing. The functions and features it offers make the process frictionless and effortless. For instance, you can add effects and music to the audio without any hesitation. The “Adjust Audio” functionality helps adjust the audio’s volume. You can also get rid of the background noise through “Audio Denoise.”

Moreover, the “Audio Ducking” feature lowers the background volume so that the dialogues can be heard more perfectly. The “Split Audio” splits the audio into different sections. You can also use the “Audio Mixer” to fine-tune the audio of your project easily. Review the different features and invest in the right software to have all required features under one platform.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Mastering Free Audio Recording: Using Audacity’s Capabilities

Natural audio recording software, such as Voice Memos for Macs or Sound Recorder for Windows PCs, is included with every machine. These applications enable users to record audio using either the desktop’s internal or an external microphone, and they generally have basic audio editing features.

However, when you’re looking for a higher-quality recording program, Audacity is the way to go. Audacity is a free audio editor with a lot of cutting-edge features. More significantly, recording using Audacity is as simple as clicking a button.

In this Audacity Record Computer Audio guide, we will show you all the methods of recording internal audio on your computer and Mac.

In this article

01 Record Audio On Audacity with a Microphone

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

“Expeditious Methods for Swiftly Neutralizing Audio Interference and Noise”

It will be challenging to remove static noise from audio since the language is often muddled by ambient noise, such as the dreaded whirring of an air conditioning unit or fans. This can make it challenging to get good audio. It is common practice to eliminate background noise before recording and mixing sound effects or working on other areas of the video’s design.

You are lucky since the Internet allows you to choose a few strategies for removing noise from audio. You may lessen the amount of noise in your video or audio recording by including some background music or by utilizing software that edits audio or video. This article will significantly assist you in searching for a method to remove static sound from audio, so keep that in mind as you read it. Let’s get started!

Part 1: How to Remove Static Noise from Audio Files with Only & Free tools?

Consider shaky or unclear video to be a problem. Audio noise may damage your video just as fast as poor visual quality. It may be tricky to remove static sound from audio, however. Additionally, it might be difficult to capture clear audio, particularly in busy areas. There are occasions when you get hissy or otherwise noisy audio, whether because of background noise or less-than-ideal equipment.

1. Audiodenoise

The tool lets you change many things, like the time smoothing of the noise reduction filter, the noise model based on tracking noise modulation, the size of the analysis blocks, etc. So, how do you remove the static audio in the background?

Here are the steps to take.

How to use Audio Denoise to get rid of static noise

Step1 Click on the “Choose File” option to start. You can also choose the video from the list of “Demo files.”

Step2 Press the Process button after you’ve uploaded the file to eliminate the noise in the audio.

Step3 After the audio is done being processed, click the Download button to save your video to your PC.

2. Wondershare AILab

You may remove static from audio by using Wondershare AILab. There is no need to specify any settings since the AI will identify and eliminate noise on its own automatically. To improve audio quality, use a noise reduction technique based on AI. No more noise will be from the breeze, the crowd, or another unwelcome sound. AILab gives you access to various free online tools that make creating images, sounds, and videos simpler and more enjoyable.

How to use Wondershare AILab to remove static sound from audio

Step1 First, choose or drag your audio file to start uploading it.

Step2 The AI will analyze the file automatically and eliminate the static sound.

Step3 Finally, at this moment, download the revised audio file.

3. Veed.io

With VEED, you can simultaneously record your computer screen and camera, making it simple to produce instructional films for professional or personal use.

VEED is one of the most straightforward online video editors that can remove static from audio with just one click of the mouse, making it an excellent choice for people who are just starting. You don’t need to re-record your audio or purchase expensive microphones that block sound. It can help you eliminate background noise from MP3, WMA, and other audio files, but with a watermark.

How do I remove static sound from the audio file using Veed online?

Step1 To upload your audio file, click the “Choose Audio” button to upload your audio file.

Step2 Click on the audio track to open the Settings menu, then choose “Clean Audio” from the list of options. The background noise will vanish on its own in a few seconds.

Step3 That’s it; you’re done. When you click “Export,” you will make your new file in a few seconds.

Part 2: How to improve your audio in the best way?

Wondershare is the company that has produced the Filmora family of video production and editing apps. Filmora offers software that may be used by various skill levels, from novice to intermediate. A timeline, a preview window, and an effects library are some of the standard elements of Filmora. These features are accessed and controlled by a drag-and-drop user interface.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

The Filmora software collection may run on machines running either Windows or macOS operating systems. It is possible to get free product samples to test them out before buying them. On the official Filmora website, you can see pricing choices for each program.

The Filmora Video Editor is easy to use and delivers various features superior to those provided by other video editors. Because of this, it is considered one of the best audio editors to answer how to remove static from audio and video.

Here is how to remove static noise from audio with Filmora.

Step1 Upload Files

Open Wondershare Filmora and load your video into the timeline window. You can get a video preview, cut it up, and remove the bits you don’t want to preserve.

Step2 Edit Audio

Select “Edit Audio” by using the context menu after right-clicking the movie in the timeline. You will see four options: silence detection, modify audio, disconnect audio, and mute. Choose the “Audio” option from the drop-down menu if you want to separate the audio from the video.

Step3 Remove Background Static

Double-click on the audio track to eliminate the background noise directly, and pick “normal denoise” from the Edit Panel. You may also double-click the video clip in the timeline to reach the Editing panel without first separating the audio from the video. Once there, you can edit the audio and eliminate the noise by clicking on the Audio tab in the Editing panel.

Step4 Fine Tune and Export

Lastly, with Equalizer, fine-tune the sound to make it more natural. For a better effect, adjust the audio frame by frame until it fits perfectly with the video. After the result, you can click “Export” to save the less noisy video on your PC or directly post it to YouTube or Vimeo.

Part 3: How to Record Noise-Free Audio?

So, that was how to remove static sound from audio. But what if you record noise-free audio instead?

If you record with a microphone and continue to hear static noise, the problem most likely lies in the cable. Most microphone cables consist of one or two conductors (wires) braided together inside a metal. This is the function that protection fulfills. It prevents the hum or static created by signals coming from outside from interfering with the signal flowing via the internal conductors.

If one of the shield connections at either end of the wire is only sometimes present or isn’t there, this might produce static electricity. If you can access the connection, check that all cables and shields are connected safely and securely.

Near a stable electromagnetic source is another possible explanation for static, which may be industrial motors or high-power radio transmitters.

Another characteristic of microphones is their impedance. It would be best to use microphone with the same impedance as the recording device.

One last step is to test the static using a different microphone to determine whether the problem persists. If this is the case, the recording device can be the source of the issue.

Conclusion

Do you believe that a grainy or unsteady video is a problem? Video quality is vital, but audio noise can quickly damage your film. However, removing static sound from audio may be a pain in the neck. In addition, capturing clear audio may be challenging, particularly in areas with a lot of background noise.

Now you have an audio file with less or no noise and want to learn how to remove static noise from audio. With the above suggestions, I hope you’ll find eliminating background noise from the video easy. If you want to be more creative in removing static noise from audio, try the Filmora video editor to give your mind a boost.

Free Download For macOS 10.14 or later

The Filmora software collection may run on machines running either Windows or macOS operating systems. It is possible to get free product samples to test them out before buying them. On the official Filmora website, you can see pricing choices for each program.

The Filmora Video Editor is easy to use and delivers various features superior to those provided by other video editors. Because of this, it is considered one of the best audio editors to answer how to remove static from audio and video.

Here is how to remove static noise from audio with Filmora.

Step1 Upload Files

Open Wondershare Filmora and load your video into the timeline window. You can get a video preview, cut it up, and remove the bits you don’t want to preserve.

Step2 Edit Audio

Select “Edit Audio” by using the context menu after right-clicking the movie in the timeline. You will see four options: silence detection, modify audio, disconnect audio, and mute. Choose the “Audio” option from the drop-down menu if you want to separate the audio from the video.

Step3 Remove Background Static

Double-click on the audio track to eliminate the background noise directly, and pick “normal denoise” from the Edit Panel. You may also double-click the video clip in the timeline to reach the Editing panel without first separating the audio from the video. Once there, you can edit the audio and eliminate the noise by clicking on the Audio tab in the Editing panel.

Step4 Fine Tune and Export

Lastly, with Equalizer, fine-tune the sound to make it more natural. For a better effect, adjust the audio frame by frame until it fits perfectly with the video. After the result, you can click “Export” to save the less noisy video on your PC or directly post it to YouTube or Vimeo.

Part 3: How to Record Noise-Free Audio?

So, that was how to remove static sound from audio. But what if you record noise-free audio instead?

If you record with a microphone and continue to hear static noise, the problem most likely lies in the cable. Most microphone cables consist of one or two conductors (wires) braided together inside a metal. This is the function that protection fulfills. It prevents the hum or static created by signals coming from outside from interfering with the signal flowing via the internal conductors.

If one of the shield connections at either end of the wire is only sometimes present or isn’t there, this might produce static electricity. If you can access the connection, check that all cables and shields are connected safely and securely.

Near a stable electromagnetic source is another possible explanation for static, which may be industrial motors or high-power radio transmitters.

Another characteristic of microphones is their impedance. It would be best to use microphone with the same impedance as the recording device.

One last step is to test the static using a different microphone to determine whether the problem persists. If this is the case, the recording device can be the source of the issue.

Conclusion

Do you believe that a grainy or unsteady video is a problem? Video quality is vital, but audio noise can quickly damage your film. However, removing static sound from audio may be a pain in the neck. In addition, capturing clear audio may be challenging, particularly in areas with a lot of background noise.

Now you have an audio file with less or no noise and want to learn how to remove static noise from audio. With the above suggestions, I hope you’ll find eliminating background noise from the video easy. If you want to be more creative in removing static noise from audio, try the Filmora video editor to give your mind a boost.

Also read: