2024 Approved Enable Silence Mode & Incorporate Custom Tracks via Windows Movie Maker
“Enable Silence Mode & Incorporate Custom Tracks via Windows Movie Maker”
How to Mute Audio in Windows Movie Maker?
Shanoon Cox
Mar 27, 2024• Proven solutions
Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.
In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.
- Part 1: How to Mute Audio in Windows Movie Maker?
- Part 2: Adding a New Audio Clip to a Video
- Part 3: A Better Way to Replace Original Audio on Windows
Part 1: How to Mute Audio in Windows Movie Maker?
Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.
Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.
Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.
Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.
If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.
Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.
Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.
Part 2: Adding a New Audio Clip to a Video
Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.
Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.
A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.
In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.
Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.
Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS
Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.
Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.
Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.
For more details, check our guide about How to remove audio from video in Filmora on Windows.
If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.
Conclusion
Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.
Shanoon Cox
Shanoon Cox is a writer and a lover of all things video.
Follow @Shanoon Cox
Shanoon Cox
Mar 27, 2024• Proven solutions
Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.
In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.
- Part 1: How to Mute Audio in Windows Movie Maker?
- Part 2: Adding a New Audio Clip to a Video
- Part 3: A Better Way to Replace Original Audio on Windows
Part 1: How to Mute Audio in Windows Movie Maker?
Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.
Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.
Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.
Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.
If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.
Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.
Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.
Part 2: Adding a New Audio Clip to a Video
Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.
Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.
A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.
In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.
Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.
Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS
Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.
Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.
Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.
For more details, check our guide about How to remove audio from video in Filmora on Windows.
If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.
Conclusion
Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.
Shanoon Cox
Shanoon Cox is a writer and a lover of all things video.
Follow @Shanoon Cox
Shanoon Cox
Mar 27, 2024• Proven solutions
Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.
In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.
- Part 1: How to Mute Audio in Windows Movie Maker?
- Part 2: Adding a New Audio Clip to a Video
- Part 3: A Better Way to Replace Original Audio on Windows
Part 1: How to Mute Audio in Windows Movie Maker?
Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.
Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.
Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.
Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.
If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.
Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.
Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.
Part 2: Adding a New Audio Clip to a Video
Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.
Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.
A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.
In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.
Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.
Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS
Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.
Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.
Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.
For more details, check our guide about How to remove audio from video in Filmora on Windows.
If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.
Conclusion
Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.
Shanoon Cox
Shanoon Cox is a writer and a lover of all things video.
Follow @Shanoon Cox
Shanoon Cox
Mar 27, 2024• Proven solutions
Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.
In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.
- Part 1: How to Mute Audio in Windows Movie Maker?
- Part 2: Adding a New Audio Clip to a Video
- Part 3: A Better Way to Replace Original Audio on Windows
Part 1: How to Mute Audio in Windows Movie Maker?
Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.
Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.
Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.
Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.
If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.
Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.
Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.
Part 2: Adding a New Audio Clip to a Video
Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.
Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.
A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.
In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.
Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.
Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS
Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.
Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.
Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.
For more details, check our guide about How to remove audio from video in Filmora on Windows.
If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.
Conclusion
Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.
Shanoon Cox
Shanoon Cox is a writer and a lover of all things video.
Follow @Shanoon Cox
Mastering Frequency Adjustment in Audacity Without Compromising Sound Fidelity
You may raise or lower the pitch of a pre-recorded song. Likewise, you may apply the pitch-changing effect in real-time sound recording. Change in pitch affects your noise in certain ways. For instance, it can help you sound younger. Similarly, it can convert the male voice into a female voice. Another notable use of the pitch-changing technique is that you can produce sounds like cartoons. So, changing pitch can add a unique touch to your voice. You can also change pitch when recording in Audacity. The following article covers details about the Audacity change pitch feature. Let’s get started.
In this article
01 What is pitch, and how does it work?
02 How to Change Pitch in Audacity?
Part 1: What is pitch, and how does it work?
Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.
On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.
Part 2: How to Change Pitch in Audacity?
Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.
Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.
Step 1: Select the audio portion
Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.
Note: Only the portion whose pitch you want to change.
Step 2: Open Effect menu
Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.
Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.
Step 3: Adjust pitch
Drag the slider to alter the pitch of the sound and press the OK button to apply changes.
Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.
Bonus Section: How to Adjust Sound Louder in Audacity?
Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.
Step 1: Add an audio file
Launch the software and click on File. Select Open and select the desired audio.
Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.
Step 2: Increase/Decrease audio gain
Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.
Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.
Conclusion
There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.
02 How to Change Pitch in Audacity?
Part 1: What is pitch, and how does it work?
Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.
On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.
Part 2: How to Change Pitch in Audacity?
Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.
Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.
Step 1: Select the audio portion
Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.
Note: Only the portion whose pitch you want to change.
Step 2: Open Effect menu
Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.
Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.
Step 3: Adjust pitch
Drag the slider to alter the pitch of the sound and press the OK button to apply changes.
Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.
Bonus Section: How to Adjust Sound Louder in Audacity?
Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.
Step 1: Add an audio file
Launch the software and click on File. Select Open and select the desired audio.
Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.
Step 2: Increase/Decrease audio gain
Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.
Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.
Conclusion
There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.
02 How to Change Pitch in Audacity?
Part 1: What is pitch, and how does it work?
Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.
On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.
Part 2: How to Change Pitch in Audacity?
Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.
Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.
Step 1: Select the audio portion
Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.
Note: Only the portion whose pitch you want to change.
Step 2: Open Effect menu
Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.
Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.
Step 3: Adjust pitch
Drag the slider to alter the pitch of the sound and press the OK button to apply changes.
Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.
Bonus Section: How to Adjust Sound Louder in Audacity?
Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.
Step 1: Add an audio file
Launch the software and click on File. Select Open and select the desired audio.
Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.
Step 2: Increase/Decrease audio gain
Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.
Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.
Conclusion
There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.
02 How to Change Pitch in Audacity?
Part 1: What is pitch, and how does it work?
Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.
On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.
Part 2: How to Change Pitch in Audacity?
Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.
Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.
Step 1: Select the audio portion
Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.
Note: Only the portion whose pitch you want to change.
Step 2: Open Effect menu
Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.
Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.
Step 3: Adjust pitch
Drag the slider to alter the pitch of the sound and press the OK button to apply changes.
Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.
Bonus Section: How to Adjust Sound Louder in Audacity?
Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.
Step 1: Add an audio file
Launch the software and click on File. Select Open and select the desired audio.
Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.
Step 2: Increase/Decrease audio gain
Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.
Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.
Conclusion
There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.
Integrating Tracks: Adding Songs and Soundscapes Into Final Cut Pro Editing
Everyone does not have expertise in using the Final Cut Pro. Some are beginners and completely new to the tool. These are always looking for proper support and want to know how to add music to final cut pro. In case you are one of these individuals, you should be focused on proper procedure and follow it step-by-step. In the upcoming paragraphs, you will get complete information about it.
In this article
01 [Add Music To Final Cut Pro](#Part 1)
02 [Alternative For Final Cut Pro To Add Music To Video](#Part 2)
Part 1 Add Music To Final Cut Pro
Are you interested to figure out the best possible method to add music files to Final Cut Pro for video creation and other purposes? If you are looking for such an option, you should be focused on the following process.
Step1 Access Final Cut Pro
Firstly, you should focus on accessing the Final Cut Pro. You should check out the application on your desktop and open it.
Step2 Go To File
After accessing the Final Cut Pro, you can see multiple options and menus on the interface. Here, you should navigate to the ‘FILE’ option. You can find out this particular option on the top of the navigation bar.
Step3 Access File
Now, you should access the FILE button. It will lead to a fully-featured menu with multiple options. You should find out the IMPORT button and proceed.
Step4 Import Button
When you click on the IMPORT button, it will provide some choices. You should go with the option of MEDIA.
Step5 Locate File
After clicking the media button, it will present a complete file and storage interface in front of you. You should find out the audio file on your device by using such an interface. Here, you need to access the targeted folder only. You should select the audio file and hit the IMPORT button. It will bring your desired audio file to the Final Cut Pro easily for further usage.
Step6 Add Audio to Video
Once you get the audio file to the library of Final Cut Pro, after that, you should proceed by arranging it as per the video sequence and requirements. You should take the video timeline carefully and make all edits smartly. Here, you will find out drag and drop features are highly beneficial. It will help you synchronize the audio and video with ease.
It is the complete process by which you can easily add music to final cut pro. With it, you also have the option of accessing its built-in music library. By using this particular library, you can get multiple audio files with sound effects, songs, etc. You can access these files to add to the video as well. In case you don’t find something relevant to the content, you can consider the option of importing your own as per the procedure.
Part 2 Alternative For Final Cut Pro To Add Music To Video
No one can ignore the features and functionalities of Final Cut Pro. But, sometimes people don’t find it suitable or appropriate as per their video editing requirements. It is the main reason why they start looking for some alternatives that can help them in getting better results with top-notch edits.
Filmora
All individuals are not working as professional video editors or designers. Due to it, they lack technical knowledge and are also unaware of the tool’s interfaces and their usability. As a result, they start facing lots of problems with complicated tools. In case you want to access a video editor with a user-friendly interface that can be helpful in creating content easily, you can consider Filmora. It is the easiest video editor to use that can be useful in creating and editing videos with ease.
Both Windows and Mac users can access Filmora by downloading software on the system. On the other hand, Final Cut Pro is available only for the Mac.
Wondershare Filmora
Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!
Try It Free Try It Free Try It Free Learn More about Filmora>
Benefits
User-friendly interface
A big music library
Available for mobile platforms as well (Filmora)
Regular updates for features and functionalities
Drawbacks
Less audio editing features
By paying attention to these aspects, you can easily understand how important and useful Filmora is. It is also having some audio editing features. It will allow you to make changes in audio files as per the requirements and keep it perfect according to the video.
Premiere Pro
Premiere Pro is not new in the market. It is an old and famous editing tool. But, the main fact about this particular source is its usability. Everyone cannot consider the option of this particular video editor. There are multiple reasons behind it. Some people may find the tool difficult to use.
For some individuals, its charges are too high. Actually, Premiere Pro is paid source. Its plans are also too expensive. If you consider its option, you have two choices bill monthly or annually. In case you choose monthly billing, you will need to pay around $31.49 per month. Annual billing will help you save some money and it costs an average of $20.99 per month.
Benefits
Regular updates
Templates, plugins, and preset options available
Drawbacks
Too Expensive
Complicated
Premiere Pro is a complicated tool to use. It is mainly made for the professionals who master these types of skills and work on big projects. If a beginner tries to access it, they may find it irrelevant and hard to understand. It takes lots of time to process and complete some basic things as well.
CyberLink PowerDirector
It is also a paid option to consider. If you choose to use CyberLink PowerDirector for the first time, you can avail of its free trial services as well. It provides a free trial of 30 days that can help you access the tool’s capability and figure out it is worth buying or not. The following are some benefits and drawbacks of choosing this particular option.
Benefits
Regular updates
Multiple features
Drawbacks
Lack of color tools
CyberLink PowerDirector is a suitable option for video editing professionals with mid-level skills. Highly skilled individuals can consider its option but they may find it easy to use and don’t get some advanced feature as per their skill set.
Conclusion
By paying attention to all these details, you can easily figure out the best final cut pro add music method. It depends on your choice that you want to use some existing audio file or want to import your own. Along with it, you can also check out some alternatives that can help you figure out what kind of tools can be considered over Final Cut Pro for better results. Filmora holds the top-notch position with lots of features, functionalities, and complete accessibilities. You need to be smart while making a final decision regarding video editor selection for creating top-notch video content to entertain the audience perfectly.
02 [Alternative For Final Cut Pro To Add Music To Video](#Part 2)
Part 1 Add Music To Final Cut Pro
Are you interested to figure out the best possible method to add music files to Final Cut Pro for video creation and other purposes? If you are looking for such an option, you should be focused on the following process.
Step1 Access Final Cut Pro
Firstly, you should focus on accessing the Final Cut Pro. You should check out the application on your desktop and open it.
Step2 Go To File
After accessing the Final Cut Pro, you can see multiple options and menus on the interface. Here, you should navigate to the ‘FILE’ option. You can find out this particular option on the top of the navigation bar.
Step3 Access File
Now, you should access the FILE button. It will lead to a fully-featured menu with multiple options. You should find out the IMPORT button and proceed.
Step4 Import Button
When you click on the IMPORT button, it will provide some choices. You should go with the option of MEDIA.
Step5 Locate File
After clicking the media button, it will present a complete file and storage interface in front of you. You should find out the audio file on your device by using such an interface. Here, you need to access the targeted folder only. You should select the audio file and hit the IMPORT button. It will bring your desired audio file to the Final Cut Pro easily for further usage.
Step6 Add Audio to Video
Once you get the audio file to the library of Final Cut Pro, after that, you should proceed by arranging it as per the video sequence and requirements. You should take the video timeline carefully and make all edits smartly. Here, you will find out drag and drop features are highly beneficial. It will help you synchronize the audio and video with ease.
It is the complete process by which you can easily add music to final cut pro. With it, you also have the option of accessing its built-in music library. By using this particular library, you can get multiple audio files with sound effects, songs, etc. You can access these files to add to the video as well. In case you don’t find something relevant to the content, you can consider the option of importing your own as per the procedure.
Part 2 Alternative For Final Cut Pro To Add Music To Video
No one can ignore the features and functionalities of Final Cut Pro. But, sometimes people don’t find it suitable or appropriate as per their video editing requirements. It is the main reason why they start looking for some alternatives that can help them in getting better results with top-notch edits.
Filmora
All individuals are not working as professional video editors or designers. Due to it, they lack technical knowledge and are also unaware of the tool’s interfaces and their usability. As a result, they start facing lots of problems with complicated tools. In case you want to access a video editor with a user-friendly interface that can be helpful in creating content easily, you can consider Filmora. It is the easiest video editor to use that can be useful in creating and editing videos with ease.
Both Windows and Mac users can access Filmora by downloading software on the system. On the other hand, Final Cut Pro is available only for the Mac.
Wondershare Filmora
Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!
Try It Free Try It Free Try It Free Learn More about Filmora>
Benefits
User-friendly interface
A big music library
Available for mobile platforms as well (Filmora)
Regular updates for features and functionalities
Drawbacks
Less audio editing features
By paying attention to these aspects, you can easily understand how important and useful Filmora is. It is also having some audio editing features. It will allow you to make changes in audio files as per the requirements and keep it perfect according to the video.
Premiere Pro
Premiere Pro is not new in the market. It is an old and famous editing tool. But, the main fact about this particular source is its usability. Everyone cannot consider the option of this particular video editor. There are multiple reasons behind it. Some people may find the tool difficult to use.
For some individuals, its charges are too high. Actually, Premiere Pro is paid source. Its plans are also too expensive. If you consider its option, you have two choices bill monthly or annually. In case you choose monthly billing, you will need to pay around $31.49 per month. Annual billing will help you save some money and it costs an average of $20.99 per month.
Benefits
Regular updates
Templates, plugins, and preset options available
Drawbacks
Too Expensive
Complicated
Premiere Pro is a complicated tool to use. It is mainly made for the professionals who master these types of skills and work on big projects. If a beginner tries to access it, they may find it irrelevant and hard to understand. It takes lots of time to process and complete some basic things as well.
CyberLink PowerDirector
It is also a paid option to consider. If you choose to use CyberLink PowerDirector for the first time, you can avail of its free trial services as well. It provides a free trial of 30 days that can help you access the tool’s capability and figure out it is worth buying or not. The following are some benefits and drawbacks of choosing this particular option.
Benefits
Regular updates
Multiple features
Drawbacks
Lack of color tools
CyberLink PowerDirector is a suitable option for video editing professionals with mid-level skills. Highly skilled individuals can consider its option but they may find it easy to use and don’t get some advanced feature as per their skill set.
Conclusion
By paying attention to all these details, you can easily figure out the best final cut pro add music method. It depends on your choice that you want to use some existing audio file or want to import your own. Along with it, you can also check out some alternatives that can help you figure out what kind of tools can be considered over Final Cut Pro for better results. Filmora holds the top-notch position with lots of features, functionalities, and complete accessibilities. You need to be smart while making a final decision regarding video editor selection for creating top-notch video content to entertain the audience perfectly.
02 [Alternative For Final Cut Pro To Add Music To Video](#Part 2)
Part 1 Add Music To Final Cut Pro
Are you interested to figure out the best possible method to add music files to Final Cut Pro for video creation and other purposes? If you are looking for such an option, you should be focused on the following process.
Step1 Access Final Cut Pro
Firstly, you should focus on accessing the Final Cut Pro. You should check out the application on your desktop and open it.
Step2 Go To File
After accessing the Final Cut Pro, you can see multiple options and menus on the interface. Here, you should navigate to the ‘FILE’ option. You can find out this particular option on the top of the navigation bar.
Step3 Access File
Now, you should access the FILE button. It will lead to a fully-featured menu with multiple options. You should find out the IMPORT button and proceed.
Step4 Import Button
When you click on the IMPORT button, it will provide some choices. You should go with the option of MEDIA.
Step5 Locate File
After clicking the media button, it will present a complete file and storage interface in front of you. You should find out the audio file on your device by using such an interface. Here, you need to access the targeted folder only. You should select the audio file and hit the IMPORT button. It will bring your desired audio file to the Final Cut Pro easily for further usage.
Step6 Add Audio to Video
Once you get the audio file to the library of Final Cut Pro, after that, you should proceed by arranging it as per the video sequence and requirements. You should take the video timeline carefully and make all edits smartly. Here, you will find out drag and drop features are highly beneficial. It will help you synchronize the audio and video with ease.
It is the complete process by which you can easily add music to final cut pro. With it, you also have the option of accessing its built-in music library. By using this particular library, you can get multiple audio files with sound effects, songs, etc. You can access these files to add to the video as well. In case you don’t find something relevant to the content, you can consider the option of importing your own as per the procedure.
Part 2 Alternative For Final Cut Pro To Add Music To Video
No one can ignore the features and functionalities of Final Cut Pro. But, sometimes people don’t find it suitable or appropriate as per their video editing requirements. It is the main reason why they start looking for some alternatives that can help them in getting better results with top-notch edits.
Filmora
All individuals are not working as professional video editors or designers. Due to it, they lack technical knowledge and are also unaware of the tool’s interfaces and their usability. As a result, they start facing lots of problems with complicated tools. In case you want to access a video editor with a user-friendly interface that can be helpful in creating content easily, you can consider Filmora. It is the easiest video editor to use that can be useful in creating and editing videos with ease.
Both Windows and Mac users can access Filmora by downloading software on the system. On the other hand, Final Cut Pro is available only for the Mac.
Wondershare Filmora
Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!
Try It Free Try It Free Try It Free Learn More about Filmora>
Benefits
User-friendly interface
A big music library
Available for mobile platforms as well (Filmora)
Regular updates for features and functionalities
Drawbacks
Less audio editing features
By paying attention to these aspects, you can easily understand how important and useful Filmora is. It is also having some audio editing features. It will allow you to make changes in audio files as per the requirements and keep it perfect according to the video.
Premiere Pro
Premiere Pro is not new in the market. It is an old and famous editing tool. But, the main fact about this particular source is its usability. Everyone cannot consider the option of this particular video editor. There are multiple reasons behind it. Some people may find the tool difficult to use.
For some individuals, its charges are too high. Actually, Premiere Pro is paid source. Its plans are also too expensive. If you consider its option, you have two choices bill monthly or annually. In case you choose monthly billing, you will need to pay around $31.49 per month. Annual billing will help you save some money and it costs an average of $20.99 per month.
Benefits
Regular updates
Templates, plugins, and preset options available
Drawbacks
Too Expensive
Complicated
Premiere Pro is a complicated tool to use. It is mainly made for the professionals who master these types of skills and work on big projects. If a beginner tries to access it, they may find it irrelevant and hard to understand. It takes lots of time to process and complete some basic things as well.
CyberLink PowerDirector
It is also a paid option to consider. If you choose to use CyberLink PowerDirector for the first time, you can avail of its free trial services as well. It provides a free trial of 30 days that can help you access the tool’s capability and figure out it is worth buying or not. The following are some benefits and drawbacks of choosing this particular option.
Benefits
Regular updates
Multiple features
Drawbacks
Lack of color tools
CyberLink PowerDirector is a suitable option for video editing professionals with mid-level skills. Highly skilled individuals can consider its option but they may find it easy to use and don’t get some advanced feature as per their skill set.
Conclusion
By paying attention to all these details, you can easily figure out the best final cut pro add music method. It depends on your choice that you want to use some existing audio file or want to import your own. Along with it, you can also check out some alternatives that can help you figure out what kind of tools can be considered over Final Cut Pro for better results. Filmora holds the top-notch position with lots of features, functionalities, and complete accessibilities. You need to be smart while making a final decision regarding video editor selection for creating top-notch video content to entertain the audience perfectly.
02 [Alternative For Final Cut Pro To Add Music To Video](#Part 2)
Part 1 Add Music To Final Cut Pro
Are you interested to figure out the best possible method to add music files to Final Cut Pro for video creation and other purposes? If you are looking for such an option, you should be focused on the following process.
Step1 Access Final Cut Pro
Firstly, you should focus on accessing the Final Cut Pro. You should check out the application on your desktop and open it.
Step2 Go To File
After accessing the Final Cut Pro, you can see multiple options and menus on the interface. Here, you should navigate to the ‘FILE’ option. You can find out this particular option on the top of the navigation bar.
Step3 Access File
Now, you should access the FILE button. It will lead to a fully-featured menu with multiple options. You should find out the IMPORT button and proceed.
Step4 Import Button
When you click on the IMPORT button, it will provide some choices. You should go with the option of MEDIA.
Step5 Locate File
After clicking the media button, it will present a complete file and storage interface in front of you. You should find out the audio file on your device by using such an interface. Here, you need to access the targeted folder only. You should select the audio file and hit the IMPORT button. It will bring your desired audio file to the Final Cut Pro easily for further usage.
Step6 Add Audio to Video
Once you get the audio file to the library of Final Cut Pro, after that, you should proceed by arranging it as per the video sequence and requirements. You should take the video timeline carefully and make all edits smartly. Here, you will find out drag and drop features are highly beneficial. It will help you synchronize the audio and video with ease.
It is the complete process by which you can easily add music to final cut pro. With it, you also have the option of accessing its built-in music library. By using this particular library, you can get multiple audio files with sound effects, songs, etc. You can access these files to add to the video as well. In case you don’t find something relevant to the content, you can consider the option of importing your own as per the procedure.
Part 2 Alternative For Final Cut Pro To Add Music To Video
No one can ignore the features and functionalities of Final Cut Pro. But, sometimes people don’t find it suitable or appropriate as per their video editing requirements. It is the main reason why they start looking for some alternatives that can help them in getting better results with top-notch edits.
Filmora
All individuals are not working as professional video editors or designers. Due to it, they lack technical knowledge and are also unaware of the tool’s interfaces and their usability. As a result, they start facing lots of problems with complicated tools. In case you want to access a video editor with a user-friendly interface that can be helpful in creating content easily, you can consider Filmora. It is the easiest video editor to use that can be useful in creating and editing videos with ease.
Both Windows and Mac users can access Filmora by downloading software on the system. On the other hand, Final Cut Pro is available only for the Mac.
Wondershare Filmora
Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!
Try It Free Try It Free Try It Free Learn More about Filmora>
Benefits
User-friendly interface
A big music library
Available for mobile platforms as well (Filmora)
Regular updates for features and functionalities
Drawbacks
Less audio editing features
By paying attention to these aspects, you can easily understand how important and useful Filmora is. It is also having some audio editing features. It will allow you to make changes in audio files as per the requirements and keep it perfect according to the video.
Premiere Pro
Premiere Pro is not new in the market. It is an old and famous editing tool. But, the main fact about this particular source is its usability. Everyone cannot consider the option of this particular video editor. There are multiple reasons behind it. Some people may find the tool difficult to use.
For some individuals, its charges are too high. Actually, Premiere Pro is paid source. Its plans are also too expensive. If you consider its option, you have two choices bill monthly or annually. In case you choose monthly billing, you will need to pay around $31.49 per month. Annual billing will help you save some money and it costs an average of $20.99 per month.
Benefits
Regular updates
Templates, plugins, and preset options available
Drawbacks
Too Expensive
Complicated
Premiere Pro is a complicated tool to use. It is mainly made for the professionals who master these types of skills and work on big projects. If a beginner tries to access it, they may find it irrelevant and hard to understand. It takes lots of time to process and complete some basic things as well.
CyberLink PowerDirector
It is also a paid option to consider. If you choose to use CyberLink PowerDirector for the first time, you can avail of its free trial services as well. It provides a free trial of 30 days that can help you access the tool’s capability and figure out it is worth buying or not. The following are some benefits and drawbacks of choosing this particular option.
Benefits
Regular updates
Multiple features
Drawbacks
Lack of color tools
CyberLink PowerDirector is a suitable option for video editing professionals with mid-level skills. Highly skilled individuals can consider its option but they may find it easy to use and don’t get some advanced feature as per their skill set.
Conclusion
By paying attention to all these details, you can easily figure out the best final cut pro add music method. It depends on your choice that you want to use some existing audio file or want to import your own. Along with it, you can also check out some alternatives that can help you figure out what kind of tools can be considered over Final Cut Pro for better results. Filmora holds the top-notch position with lots of features, functionalities, and complete accessibilities. You need to be smart while making a final decision regarding video editor selection for creating top-notch video content to entertain the audience perfectly.
Also read:
- Updated In 2024, MP3 Cutter for Mac - Which Is the Best MP3 Cutter on Mac?
- New Key Information on Utilizing YouTubes Sound Bank for 2024
- Updated 2024 Approved Open Source Audio Sources A Filmmakers Resource List
- Updated 2024 Approved The Sound Barrier Breakthrough Streamlining Audio Processing for Digital Users
- New Audio Formats Guide How to Choose Best Audio Formats Solved
- Top 10 Tools for Clearing Up Clutter in Audio Files A Comprehensive Guide
- Updated In 2024, Tactical Cut Discarding Audible Elements From Multimedia Files (MP4, MKV, AVI, MOV, WMV)
- New The Guide to Blending Music and Movement on Screen
- New In 2024, Essential Audio Recorders The Top MP3 Software Compatible with PC & Mac OS
- Updated Ornithological Soundscapes MP3 Compilation for 2024
- Updated How Does Gain Staging Impact the Overall Fidelity of Recorded Tracks, In 2024
- New 2024 Approved Enhance Business Efficiency Mastering Call Tracking with Google Voice Services
- Unlocking the Power of Language Adaptation Advanced Techniques for Video Dubbing via Filmora
- Updated In 2024, Sonic Separation Isolating Key Audio Elements and Silencing the Bystander in DaVinci Resolve
- New The Ultimate Checklist for Maximizing Efficiency with TwistedWave Audio Editor for 2024
- Updated 6 Best Audio Mixers For Enhancing Your Streaming for 2024
- Updated The Ultimate Compilation of Best No-Price-Tag Podcast Recording Programs
- 2024 Approved Directory of Free, Non-Copyrighted Background Song Sources
- New 2024 Approved The AutoTune Plugin Companion for Advanced Sound Editing on Audacity
- New Hear the Pitch Finding Professional-Grade Cricket Soundscape for 2024
- New Enhancing Audio Clarity in DIY Home Film Production
- Updated 2024 Approved The Ultimate Guide to Spectacular Sound Art Ranking the Top 5 Visualizers
- Updated The Premier Virtual Communities Where Strangers Become Friends
- New Compiling a Comprehensive Guide to Cost-Free VST Tools Available for 2024
- Updated 2024 Approved Clubhouse Decoded Delving Into Its Mission, Community Dynamics, and Evolving Landscape
- New Creating MP3 Files From Textual Content on Multiple Operating Systems for 2024
- Updated 15 Free Music Pieces Recommended for Crafting Memorable Video Narratives
- New In 2024, Premiere Pairing Programs Ultimate Beat Match Video Editor Companion, 2023
- New Echo Excellence Enhancing Windows PC Sounds with Online Acoustic Plugins for 2024
- Updated In 2024, The Leading Edge in Natural Language Processing Voice Synthesis Technologies
- Updated The Truth About Digital Studios Separating Myths From DAW Reality for 2024
- New Discovering the 6 Best Call Voice Boosters on Both Android and iPhone Devices for 2024
- In 2024, Essential Compilation Discovering the Top 11 Free Audio Customization Tools for iOS & Android Gadgets
- New Demystifying Clubhouse Understanding the Social Networks Foundation, Purpose, and Potential Impact for 2024
- Updated 2024 Approved The Quintessential Free MP3 Amplitude Adjusters Guide
- In 2024, Best 10 Websites to Download Montage Music
- Updated The Process of Purging Audio Content in the Latest AVI Codec
- In 2024, Essential Unlicensed Melodies for Picture Sequences
- Updated In 2024, Smart Choices Curating the Best 11 Fee-Exempt Sound Modification Applications on iOS and Android
- Updated The Investment in Sound Quality Ranked List of Excellent, No-Cost and Full-Priced Podcast Editors for 2024
- How Cinematic Piano Background Music Help Video Editors for 2024
- Updated How to Remove Distortion From Audio for Your Video for 2024
- Updated In 2024, 8 Best DAW for Hip-Hop Music Production
- In 2024, How to Remove Apple ID from iPhone 14 Plus without Password?
- In 2024, Easy Ways to Manage Your Infinix Hot 40 Location Settings | Dr.fone
- CatchEmAll Celebrate National Pokémon Day with Virtual Location On Honor 80 Pro Straight Screen Edition | Dr.fone
- How To Fix OEM Unlock Missing on Realme 11 5G?
- Does Life360 Notify When You Log Out On Xiaomi Redmi 13C 5G? | Dr.fone
- In 2024, Why Your WhatsApp Live Location is Not Updating and How to Fix on your Nubia Red Magic 8S Pro | Dr.fone
- In 2024, How To Remove Phone Number From Your Apple ID from Your iPhone 14?
- Updated 2024 Approved 5 Foolproof Amazing Anime Text to Speech Tips for Makers
- In 2024, Top 10 AirPlay Apps in Asus ROG Phone 7 Ultimate for Streaming | Dr.fone
- In 2024, How To Change Vivo V29 Lock Screen Password?
- How can I get more stardust in pokemon go On Motorola Edge 40 Pro? | Dr.fone
- Read This Guide to Find a Reliable Alternative to Fake GPS On Poco C51 | Dr.fone
- In 2024, How to Make Falling Text Effect in Filmora?
- How and Where to Find a Shiny Stone Pokémon For Honor Magic Vs 2? | Dr.fone
- In 2024, How to Unlock Apple iPhone SE (2022), Apples New iPhone
- 2024 Approved 10 Blockbuster Movies That Rely on Final Cut Pro for Post-Production
- How to Change Nokia G310 Location on Skout | Dr.fone
- In 2024, 3 Things You Must Know about Fake Snapchat Location On Tecno Spark 10C | Dr.fone
- Pattern Locks Are Unsafe Secure Your Nubia Z50 Ultra Phone Now with These Tips
- Title: 2024 Approved Enable Silence Mode & Incorporate Custom Tracks via Windows Movie Maker
- Author: Paul
- Created at : 2024-05-05 06:13:38
- Updated at : 2024-05-06 06:13:38
- Link: https://voice-adjusting.techidaily.com/2024-approved-enable-silence-mode-and-incorporate-custom-tracks-via-windows-movie-maker/
- License: This work is licensed under CC BY-NC-SA 4.0.