2024 Approved A Curated Selection of Freely Available Sound Pressure Balancers
“A Curated Selection of Freely Available Sound Pressure Balancers”
When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!
So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.
With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.
Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.
As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.
With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!
So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.
Wondershare Filmora X
Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!
Free Download For Win 7 or later(64-bit)
Free Download For macOS 10.14 or later
When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.
Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:
Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.
After you have clicked on it, wait until the normalization completes.
Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!
Adobe Premiere Pro
Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.
To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.
Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.
(If you can not see your audio meters, just go to Window menu and choose Audio Meters).
So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.
So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:
Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!
VLC Media Player
VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.
But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:
You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.
What VLC does is just let adjust the general volume, leaving the specifics out of our control.
If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:
Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.
In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.
Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.
Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.
MP3Gain
MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.
So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…
Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.
Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.
The software will show you the volume of each of the file, and then you will need to just click on Track Gain.
Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!
Movavi
Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!
Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.
If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.
To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.
So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!
Free Download For macOS 10.14 or later
When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.
Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:
Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.
After you have clicked on it, wait until the normalization completes.
Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!
Adobe Premiere Pro
Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.
To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.
Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.
(If you can not see your audio meters, just go to Window menu and choose Audio Meters).
So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.
So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:
Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!
VLC Media Player
VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.
But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:
You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.
What VLC does is just let adjust the general volume, leaving the specifics out of our control.
If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:
Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.
In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.
Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.
Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.
MP3Gain
MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.
So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…
Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.
Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.
The software will show you the volume of each of the file, and then you will need to just click on Track Gain.
Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!
Movavi
Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!
Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.
If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.
To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.
So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!
The Soundless Shift: How to Remove Audio From Video Projects Today
How to Mute Audio from Video
Shanoon Cox
Mar 27, 2024• Proven solutions
Video editing can be a fun task, but it can also be frustrating and challenging. Adding finishing touches to make it appear better will surely require knowledge and expertise. More than just adding special effects , another thing that you might want to do is to mute video in specific parts, such as when there is crappy noise.
There are many instances wherein you will find it practical to mute some parts of the video you are editing. One of the reasons to mute it is when there is crappy noise in the background. The sound of a barking dog, loud footsteps, or rain, among others, can affect the quality of your video. Any distracting or broken sound in the background should be removed so as not to affect the overall quality of the footage negatively. For instance, if the video is an interview of someone and bad words or potentially offensive statements have been uttered, you might also find it practical to mute the video. If you plan to embed background music , muting the audio will also be beneficial.
How to Mute Audio from Video with Wondershare Filmora
Generally speaking, there are two ways by which the software can be used.
To begin with, get a free trial copy of Wondershare Filmora .
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Methode 1: The first one is through using the “ Mute” feature. The first thing you have to do is import the file on your computer. Open the video editor. Drag the file to the timeline of the software’s interface. You can also click on the “Import” button. Right-click on the file and select mute. After doing this, save the file based on the preferred format.
Methode 2: Alternatively, you can also use the audio detach feature to mute video. To do this, open the program. Click on the “Import” button and select the video you would like to edit from the hard drive. Once it is loaded, it will appear in the file tray. If you double-click on the video, a preview will appear on the right screen. Right-click on the file and select “Audio Detach.” Once it is separated, it will appear in the audio timeline. You can also edit this separated audio to match your video better. Simply hit the delete button from your keyboard, and the audio will already be removed.
With WondershareFilmora, you can mute video with ease. You do not need to be an expert in using software programs. Even if you are a beginner, follow the easy steps mentioned below. It will only take a few minutes of your time before you can take out unwanted audio from your file.
Wondershare Filmora - The Best Way to Mute Video
If you are looking for software that can be used to mute video, you can possibly be confronted with overwhelming options, each with the promise of being the best. In this case, there is no need to look any further. Wondershare Filmora can prove to be one of the best choices. It is a video editing software that will allow you to handle any editing project easily. It is one of the most trusted options available in the market today.
There are many reasons why Wondershare Filmora is an excellent choice to mute video. Among others, its popularity can be attributed to being user-friendly. Its easy-to-use interface will surely be loved even by beginners. Even if you have not edited videos before or are clueless about how it works, it will not take long before you can be using it like a pro. Aside from being user-friendly, it is also an excellent choice because it can support different file formats, such as MP4, MOV, MKV, and AVI, among others. There is no need to convert the file before having it edited, as the software can support it. It will also allow you to save the video and make it playable on different devices. You can also add watermark and special effects. Lastly, it supports both Windows and Mac OS X.
=“” style=”width: 100%; height: 278.438px;”;
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Shanoon Cox
Shanoon Cox is a writer and a lover of all things video.
Follow @Shanoon Cox
Shanoon Cox
Mar 27, 2024• Proven solutions
Video editing can be a fun task, but it can also be frustrating and challenging. Adding finishing touches to make it appear better will surely require knowledge and expertise. More than just adding special effects , another thing that you might want to do is to mute video in specific parts, such as when there is crappy noise.
There are many instances wherein you will find it practical to mute some parts of the video you are editing. One of the reasons to mute it is when there is crappy noise in the background. The sound of a barking dog, loud footsteps, or rain, among others, can affect the quality of your video. Any distracting or broken sound in the background should be removed so as not to affect the overall quality of the footage negatively. For instance, if the video is an interview of someone and bad words or potentially offensive statements have been uttered, you might also find it practical to mute the video. If you plan to embed background music , muting the audio will also be beneficial.
How to Mute Audio from Video with Wondershare Filmora
Generally speaking, there are two ways by which the software can be used.
To begin with, get a free trial copy of Wondershare Filmora .
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Methode 1: The first one is through using the “ Mute” feature. The first thing you have to do is import the file on your computer. Open the video editor. Drag the file to the timeline of the software’s interface. You can also click on the “Import” button. Right-click on the file and select mute. After doing this, save the file based on the preferred format.
Methode 2: Alternatively, you can also use the audio detach feature to mute video. To do this, open the program. Click on the “Import” button and select the video you would like to edit from the hard drive. Once it is loaded, it will appear in the file tray. If you double-click on the video, a preview will appear on the right screen. Right-click on the file and select “Audio Detach.” Once it is separated, it will appear in the audio timeline. You can also edit this separated audio to match your video better. Simply hit the delete button from your keyboard, and the audio will already be removed.
With WondershareFilmora, you can mute video with ease. You do not need to be an expert in using software programs. Even if you are a beginner, follow the easy steps mentioned below. It will only take a few minutes of your time before you can take out unwanted audio from your file.
Wondershare Filmora - The Best Way to Mute Video
If you are looking for software that can be used to mute video, you can possibly be confronted with overwhelming options, each with the promise of being the best. In this case, there is no need to look any further. Wondershare Filmora can prove to be one of the best choices. It is a video editing software that will allow you to handle any editing project easily. It is one of the most trusted options available in the market today.
There are many reasons why Wondershare Filmora is an excellent choice to mute video. Among others, its popularity can be attributed to being user-friendly. Its easy-to-use interface will surely be loved even by beginners. Even if you have not edited videos before or are clueless about how it works, it will not take long before you can be using it like a pro. Aside from being user-friendly, it is also an excellent choice because it can support different file formats, such as MP4, MOV, MKV, and AVI, among others. There is no need to convert the file before having it edited, as the software can support it. It will also allow you to save the video and make it playable on different devices. You can also add watermark and special effects. Lastly, it supports both Windows and Mac OS X.
=“” style=”width: 100%; height: 278.438px;”;
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Shanoon Cox
Shanoon Cox is a writer and a lover of all things video.
Follow @Shanoon Cox
Shanoon Cox
Mar 27, 2024• Proven solutions
Video editing can be a fun task, but it can also be frustrating and challenging. Adding finishing touches to make it appear better will surely require knowledge and expertise. More than just adding special effects , another thing that you might want to do is to mute video in specific parts, such as when there is crappy noise.
There are many instances wherein you will find it practical to mute some parts of the video you are editing. One of the reasons to mute it is when there is crappy noise in the background. The sound of a barking dog, loud footsteps, or rain, among others, can affect the quality of your video. Any distracting or broken sound in the background should be removed so as not to affect the overall quality of the footage negatively. For instance, if the video is an interview of someone and bad words or potentially offensive statements have been uttered, you might also find it practical to mute the video. If you plan to embed background music , muting the audio will also be beneficial.
How to Mute Audio from Video with Wondershare Filmora
Generally speaking, there are two ways by which the software can be used.
To begin with, get a free trial copy of Wondershare Filmora .
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Methode 1: The first one is through using the “ Mute” feature. The first thing you have to do is import the file on your computer. Open the video editor. Drag the file to the timeline of the software’s interface. You can also click on the “Import” button. Right-click on the file and select mute. After doing this, save the file based on the preferred format.
Methode 2: Alternatively, you can also use the audio detach feature to mute video. To do this, open the program. Click on the “Import” button and select the video you would like to edit from the hard drive. Once it is loaded, it will appear in the file tray. If you double-click on the video, a preview will appear on the right screen. Right-click on the file and select “Audio Detach.” Once it is separated, it will appear in the audio timeline. You can also edit this separated audio to match your video better. Simply hit the delete button from your keyboard, and the audio will already be removed.
With WondershareFilmora, you can mute video with ease. You do not need to be an expert in using software programs. Even if you are a beginner, follow the easy steps mentioned below. It will only take a few minutes of your time before you can take out unwanted audio from your file.
Wondershare Filmora - The Best Way to Mute Video
If you are looking for software that can be used to mute video, you can possibly be confronted with overwhelming options, each with the promise of being the best. In this case, there is no need to look any further. Wondershare Filmora can prove to be one of the best choices. It is a video editing software that will allow you to handle any editing project easily. It is one of the most trusted options available in the market today.
There are many reasons why Wondershare Filmora is an excellent choice to mute video. Among others, its popularity can be attributed to being user-friendly. Its easy-to-use interface will surely be loved even by beginners. Even if you have not edited videos before or are clueless about how it works, it will not take long before you can be using it like a pro. Aside from being user-friendly, it is also an excellent choice because it can support different file formats, such as MP4, MOV, MKV, and AVI, among others. There is no need to convert the file before having it edited, as the software can support it. It will also allow you to save the video and make it playable on different devices. You can also add watermark and special effects. Lastly, it supports both Windows and Mac OS X.
=“” style=”width: 100%; height: 278.438px;”;
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Shanoon Cox
Shanoon Cox is a writer and a lover of all things video.
Follow @Shanoon Cox
Shanoon Cox
Mar 27, 2024• Proven solutions
Video editing can be a fun task, but it can also be frustrating and challenging. Adding finishing touches to make it appear better will surely require knowledge and expertise. More than just adding special effects , another thing that you might want to do is to mute video in specific parts, such as when there is crappy noise.
There are many instances wherein you will find it practical to mute some parts of the video you are editing. One of the reasons to mute it is when there is crappy noise in the background. The sound of a barking dog, loud footsteps, or rain, among others, can affect the quality of your video. Any distracting or broken sound in the background should be removed so as not to affect the overall quality of the footage negatively. For instance, if the video is an interview of someone and bad words or potentially offensive statements have been uttered, you might also find it practical to mute the video. If you plan to embed background music , muting the audio will also be beneficial.
How to Mute Audio from Video with Wondershare Filmora
Generally speaking, there are two ways by which the software can be used.
To begin with, get a free trial copy of Wondershare Filmora .
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Methode 1: The first one is through using the “ Mute” feature. The first thing you have to do is import the file on your computer. Open the video editor. Drag the file to the timeline of the software’s interface. You can also click on the “Import” button. Right-click on the file and select mute. After doing this, save the file based on the preferred format.
Methode 2: Alternatively, you can also use the audio detach feature to mute video. To do this, open the program. Click on the “Import” button and select the video you would like to edit from the hard drive. Once it is loaded, it will appear in the file tray. If you double-click on the video, a preview will appear on the right screen. Right-click on the file and select “Audio Detach.” Once it is separated, it will appear in the audio timeline. You can also edit this separated audio to match your video better. Simply hit the delete button from your keyboard, and the audio will already be removed.
With WondershareFilmora, you can mute video with ease. You do not need to be an expert in using software programs. Even if you are a beginner, follow the easy steps mentioned below. It will only take a few minutes of your time before you can take out unwanted audio from your file.
Wondershare Filmora - The Best Way to Mute Video
If you are looking for software that can be used to mute video, you can possibly be confronted with overwhelming options, each with the promise of being the best. In this case, there is no need to look any further. Wondershare Filmora can prove to be one of the best choices. It is a video editing software that will allow you to handle any editing project easily. It is one of the most trusted options available in the market today.
There are many reasons why Wondershare Filmora is an excellent choice to mute video. Among others, its popularity can be attributed to being user-friendly. Its easy-to-use interface will surely be loved even by beginners. Even if you have not edited videos before or are clueless about how it works, it will not take long before you can be using it like a pro. Aside from being user-friendly, it is also an excellent choice because it can support different file formats, such as MP4, MOV, MKV, and AVI, among others. There is no need to convert the file before having it edited, as the software can support it. It will also allow you to save the video and make it playable on different devices. You can also add watermark and special effects. Lastly, it supports both Windows and Mac OS X.
=“” style=”width: 100%; height: 278.438px;”;
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Shanoon Cox
Shanoon Cox is a writer and a lover of all things video.
Follow @Shanoon Cox
The Art of a Louder, Sharper Speech: Filmmaker’s Guide to Voice Projection Using Filmora
How to Make Your Voice Higher With Filmora
Liza Brown
Mar 27, 2024• Proven solutions
A video is nothing without a clear and smooth voice. It doesn’t matter if you have a high definition video quality but your video doesn’t have a clear and loud voice, it will be a failure. If you are recording a video and you don’t have the equipment to record your voice properly, low voice can become a big problem in your recorded videos. But some steps can help you and show you the ways of how to make your voice higher. Increasing one’s voice is not an as easy task as it may seem. Just like other skills, it is also a form of skill that requires a lot of practice and experience to master. There are o many factors to consider while recording a video with a high voice or pitch. In this article, we are going to describe how to make your voice higher with two steps. In the first step, we will talk about the factors that you must consider while recording your video. And in the 2nd step, we will be discussing the way of how to make your voice higher using Filmora. Both of these steps require patience and practice.
Step 1: How to make your voice higher while recording
Step 2: How to make your voice higher with Filmora
So let’s start with the first step to making your voice higher while you are recording your video. If you can successfully make your voice higher during this process, it will not require any hard work to make it higher in the post-production process.
You might be interested in:
How to make your Voice Higher while Recording
There are so many ways and exercises that can help change the pitch of your voice and make it higher even if you don’t have high pitch voice. We are going to discuss 5 exercises that can help you achieve this task. But remember that these exercises will practice and patience in order to show the required results.
- Focus on Breathing
The higher voice you want the more air it will need. To higher your voice, you have to take deep breathes from your nose and release them while speaking. It will boost the pitch of your voice and make it higher than your usual voice. Singers use this technique while they want to hit a high pitch. It gives your body and lungs the power to generate a higher voice. Breathing plays a very vital role in making your voice higher. If you are not breathing correctly, you can’t keep the voice higher for a longer period of time. Just like all other skills, this exercise also needs a lot of practice to master. Start practicing this technique by reading a sentence, then move forward to a paragraph, and so on. Following this process will make you master the process of highering your voice using your own breaths. Then you can start using this technique in all of your videos very easily.
- Listen to Your Voice
Do you find it amusing to know that you haven’t ever heard your own voice if you haven’t listened to your own recorded audio or video? You will find your voice very different on the recording than in reality. Because in reality, it is difficult to focus on listening to your own voice while you speak. You will probably hate your own voice the first time you listen to it as a recording. To make your voice higher, it is important to listen and observe your voice very carefully and analyze where it goes down and where it goes up. It will help you improve your voice after every try. This practice will help you master the process of highering your voice using your own analyzes.
- Remove the Obstacles
Since now we know that the main way to make your voice higher is to provide your lungs power with the help of your own breathes. But what makes it decrease its intensity is the obstacles that come in the way of your voice. The first and main obstacle that your voice faces is your tongue. Everyone knows the importance of tongue in helping you speak and generate words. But it sometimes works as a hindrance to block the sounds our lungs make. Therefore, it is very important to keep your tongue in the right position while generating high pitched voice. Try to keep your tongue as low as possible and don’t let it touch the upper part of your mouth to avoid creating a blockage for your voice. In the beginning, it will feel like an impossible task, but as you move forward and practice it more often, you will notice the difference. This will enhance your voice a lot and take it to a level, where you had never imagined it would reach. If you are failing again and again, then don’t worry. This is not an easy task to accomplish, it requires patience and consistency to master.
- Use Nasal Voice
There are multiple ways of generating voice in a human body. Just like the mouth, sometimes the nose is also used to release voices. Those who use Nasal voices while they speak have a higher voice than those who don’t. The gateway used by the nose to release voice is very narrow, producing a thinner voice resulting in high pitched sound. It is also not a good practice to use this technique very often. Because it can make you irritated and annoying. Try to mix the nasal voice only 50% to the voice of your mouth to keep it safe, and sound normal.
- Focus on your Posture
If you know anything about signing or you know any singer, you will come to know that your posture plays a very vital role in generating the sound of your choice. The ideal posture for a higher voice and proper tone is to sit with your back straight, keep your tongue as low as possible, rest your mouth and look slightly upward to make your neck relax a bit. This can completely transform your voice and make it sound like a professional.
How to make your Voice Higher with Filmora
If you have already recorded a video and that video has a very pathetic voice quality, then there is also a hope to make your voice higher by using Filmora. The previous step will help you improve your voice quality to a great extent, but if you don’t want to re-record the video and improve the existing video, you can follow these steps to make sound better.
Method 1: Low Bass
Step 1: Open Filmora, and export the video to a higher voice.
Step 2: Drag and drop the video into the timeline to enable its editing options.
Step 3: Right Click on the video, and select Adjust Audio from the list to open the option.
Step 4: It will open the settings related to the sound of your video, you make any required changes from here, in order to higher its voice.
Step 5: From the equalizer drop-down menu, select the low base option. It will make your voice heavy and will make it more audible than its original voice.
Method 2: High-Pitched Voice
Step 1: Open Filmora and export the video to a higher voice.
Step 2: Drag and drop the video into the timeline to enable its editing options.
Step 3: Right Click on the video, and select Adjust Audio from the list to open the option.
Step 4: It will open the settings related to the sound of your video, you make any required changes from here, in order to higher its voice.
Step 5: From these options, go to the pitch, and increase by two to three points. Now play your video and check the results. It will make the voice of your video higher with a high pitch.
Method 3: Low-Pitched Voice
Step 1: Open Filmora, and export the video to a higher voice.
Step 2: Drag and drop the video into the timeline to enable its editing options.
Step 3: Right Click on the video, and select Adjust Audio from the list to open the option.
Step 4: It will open the settings related to the sound of your video, you make any required changes from here, in order to higher its voice.
Step 5: From settings, go to the pitch settings, and decrease it by two to three points. It will make your voice sound intense and make it a bit higher than its original voice. Play the video and notice the changes. You can change the pitch settings accordingly after checking its results and choose a setting that best suits your video.
Both of these steps can help you enhance the quality of your voice to a great extent. For better results, follow both steps, higher your voice while recording and higher your voice with Filmora. The first step will let you make your voice higher using your own mouth and lungs. The second step will help you improve it more and you can choose any one method from the three available methods that best suits your video and voice of the video and make your videos more engaging and interesting video. So, let’s transform your videos to make them more engaging and appealing to the viewers.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Liza Brown
Mar 27, 2024• Proven solutions
A video is nothing without a clear and smooth voice. It doesn’t matter if you have a high definition video quality but your video doesn’t have a clear and loud voice, it will be a failure. If you are recording a video and you don’t have the equipment to record your voice properly, low voice can become a big problem in your recorded videos. But some steps can help you and show you the ways of how to make your voice higher. Increasing one’s voice is not an as easy task as it may seem. Just like other skills, it is also a form of skill that requires a lot of practice and experience to master. There are o many factors to consider while recording a video with a high voice or pitch. In this article, we are going to describe how to make your voice higher with two steps. In the first step, we will talk about the factors that you must consider while recording your video. And in the 2nd step, we will be discussing the way of how to make your voice higher using Filmora. Both of these steps require patience and practice.
Step 1: How to make your voice higher while recording
Step 2: How to make your voice higher with Filmora
So let’s start with the first step to making your voice higher while you are recording your video. If you can successfully make your voice higher during this process, it will not require any hard work to make it higher in the post-production process.
You might be interested in:
How to make your Voice Higher while Recording
There are so many ways and exercises that can help change the pitch of your voice and make it higher even if you don’t have high pitch voice. We are going to discuss 5 exercises that can help you achieve this task. But remember that these exercises will practice and patience in order to show the required results.
- Focus on Breathing
The higher voice you want the more air it will need. To higher your voice, you have to take deep breathes from your nose and release them while speaking. It will boost the pitch of your voice and make it higher than your usual voice. Singers use this technique while they want to hit a high pitch. It gives your body and lungs the power to generate a higher voice. Breathing plays a very vital role in making your voice higher. If you are not breathing correctly, you can’t keep the voice higher for a longer period of time. Just like all other skills, this exercise also needs a lot of practice to master. Start practicing this technique by reading a sentence, then move forward to a paragraph, and so on. Following this process will make you master the process of highering your voice using your own breaths. Then you can start using this technique in all of your videos very easily.
- Listen to Your Voice
Do you find it amusing to know that you haven’t ever heard your own voice if you haven’t listened to your own recorded audio or video? You will find your voice very different on the recording than in reality. Because in reality, it is difficult to focus on listening to your own voice while you speak. You will probably hate your own voice the first time you listen to it as a recording. To make your voice higher, it is important to listen and observe your voice very carefully and analyze where it goes down and where it goes up. It will help you improve your voice after every try. This practice will help you master the process of highering your voice using your own analyzes.
- Remove the Obstacles
Since now we know that the main way to make your voice higher is to provide your lungs power with the help of your own breathes. But what makes it decrease its intensity is the obstacles that come in the way of your voice. The first and main obstacle that your voice faces is your tongue. Everyone knows the importance of tongue in helping you speak and generate words. But it sometimes works as a hindrance to block the sounds our lungs make. Therefore, it is very important to keep your tongue in the right position while generating high pitched voice. Try to keep your tongue as low as possible and don’t let it touch the upper part of your mouth to avoid creating a blockage for your voice. In the beginning, it will feel like an impossible task, but as you move forward and practice it more often, you will notice the difference. This will enhance your voice a lot and take it to a level, where you had never imagined it would reach. If you are failing again and again, then don’t worry. This is not an easy task to accomplish, it requires patience and consistency to master.
- Use Nasal Voice
There are multiple ways of generating voice in a human body. Just like the mouth, sometimes the nose is also used to release voices. Those who use Nasal voices while they speak have a higher voice than those who don’t. The gateway used by the nose to release voice is very narrow, producing a thinner voice resulting in high pitched sound. It is also not a good practice to use this technique very often. Because it can make you irritated and annoying. Try to mix the nasal voice only 50% to the voice of your mouth to keep it safe, and sound normal.
- Focus on your Posture
If you know anything about signing or you know any singer, you will come to know that your posture plays a very vital role in generating the sound of your choice. The ideal posture for a higher voice and proper tone is to sit with your back straight, keep your tongue as low as possible, rest your mouth and look slightly upward to make your neck relax a bit. This can completely transform your voice and make it sound like a professional.
How to make your Voice Higher with Filmora
If you have already recorded a video and that video has a very pathetic voice quality, then there is also a hope to make your voice higher by using Filmora. The previous step will help you improve your voice quality to a great extent, but if you don’t want to re-record the video and improve the existing video, you can follow these steps to make sound better.
Method 1: Low Bass
Step 1: Open Filmora, and export the video to a higher voice.
Step 2: Drag and drop the video into the timeline to enable its editing options.
Step 3: Right Click on the video, and select Adjust Audio from the list to open the option.
Step 4: It will open the settings related to the sound of your video, you make any required changes from here, in order to higher its voice.
Step 5: From the equalizer drop-down menu, select the low base option. It will make your voice heavy and will make it more audible than its original voice.
Method 2: High-Pitched Voice
Step 1: Open Filmora and export the video to a higher voice.
Step 2: Drag and drop the video into the timeline to enable its editing options.
Step 3: Right Click on the video, and select Adjust Audio from the list to open the option.
Step 4: It will open the settings related to the sound of your video, you make any required changes from here, in order to higher its voice.
Step 5: From these options, go to the pitch, and increase by two to three points. Now play your video and check the results. It will make the voice of your video higher with a high pitch.
Method 3: Low-Pitched Voice
Step 1: Open Filmora, and export the video to a higher voice.
Step 2: Drag and drop the video into the timeline to enable its editing options.
Step 3: Right Click on the video, and select Adjust Audio from the list to open the option.
Step 4: It will open the settings related to the sound of your video, you make any required changes from here, in order to higher its voice.
Step 5: From settings, go to the pitch settings, and decrease it by two to three points. It will make your voice sound intense and make it a bit higher than its original voice. Play the video and notice the changes. You can change the pitch settings accordingly after checking its results and choose a setting that best suits your video.
Both of these steps can help you enhance the quality of your voice to a great extent. For better results, follow both steps, higher your voice while recording and higher your voice with Filmora. The first step will let you make your voice higher using your own mouth and lungs. The second step will help you improve it more and you can choose any one method from the three available methods that best suits your video and voice of the video and make your videos more engaging and interesting video. So, let’s transform your videos to make them more engaging and appealing to the viewers.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Liza Brown
Mar 27, 2024• Proven solutions
A video is nothing without a clear and smooth voice. It doesn’t matter if you have a high definition video quality but your video doesn’t have a clear and loud voice, it will be a failure. If you are recording a video and you don’t have the equipment to record your voice properly, low voice can become a big problem in your recorded videos. But some steps can help you and show you the ways of how to make your voice higher. Increasing one’s voice is not an as easy task as it may seem. Just like other skills, it is also a form of skill that requires a lot of practice and experience to master. There are o many factors to consider while recording a video with a high voice or pitch. In this article, we are going to describe how to make your voice higher with two steps. In the first step, we will talk about the factors that you must consider while recording your video. And in the 2nd step, we will be discussing the way of how to make your voice higher using Filmora. Both of these steps require patience and practice.
Step 1: How to make your voice higher while recording
Step 2: How to make your voice higher with Filmora
So let’s start with the first step to making your voice higher while you are recording your video. If you can successfully make your voice higher during this process, it will not require any hard work to make it higher in the post-production process.
You might be interested in:
How to make your Voice Higher while Recording
There are so many ways and exercises that can help change the pitch of your voice and make it higher even if you don’t have high pitch voice. We are going to discuss 5 exercises that can help you achieve this task. But remember that these exercises will practice and patience in order to show the required results.
- Focus on Breathing
The higher voice you want the more air it will need. To higher your voice, you have to take deep breathes from your nose and release them while speaking. It will boost the pitch of your voice and make it higher than your usual voice. Singers use this technique while they want to hit a high pitch. It gives your body and lungs the power to generate a higher voice. Breathing plays a very vital role in making your voice higher. If you are not breathing correctly, you can’t keep the voice higher for a longer period of time. Just like all other skills, this exercise also needs a lot of practice to master. Start practicing this technique by reading a sentence, then move forward to a paragraph, and so on. Following this process will make you master the process of highering your voice using your own breaths. Then you can start using this technique in all of your videos very easily.
- Listen to Your Voice
Do you find it amusing to know that you haven’t ever heard your own voice if you haven’t listened to your own recorded audio or video? You will find your voice very different on the recording than in reality. Because in reality, it is difficult to focus on listening to your own voice while you speak. You will probably hate your own voice the first time you listen to it as a recording. To make your voice higher, it is important to listen and observe your voice very carefully and analyze where it goes down and where it goes up. It will help you improve your voice after every try. This practice will help you master the process of highering your voice using your own analyzes.
- Remove the Obstacles
Since now we know that the main way to make your voice higher is to provide your lungs power with the help of your own breathes. But what makes it decrease its intensity is the obstacles that come in the way of your voice. The first and main obstacle that your voice faces is your tongue. Everyone knows the importance of tongue in helping you speak and generate words. But it sometimes works as a hindrance to block the sounds our lungs make. Therefore, it is very important to keep your tongue in the right position while generating high pitched voice. Try to keep your tongue as low as possible and don’t let it touch the upper part of your mouth to avoid creating a blockage for your voice. In the beginning, it will feel like an impossible task, but as you move forward and practice it more often, you will notice the difference. This will enhance your voice a lot and take it to a level, where you had never imagined it would reach. If you are failing again and again, then don’t worry. This is not an easy task to accomplish, it requires patience and consistency to master.
- Use Nasal Voice
There are multiple ways of generating voice in a human body. Just like the mouth, sometimes the nose is also used to release voices. Those who use Nasal voices while they speak have a higher voice than those who don’t. The gateway used by the nose to release voice is very narrow, producing a thinner voice resulting in high pitched sound. It is also not a good practice to use this technique very often. Because it can make you irritated and annoying. Try to mix the nasal voice only 50% to the voice of your mouth to keep it safe, and sound normal.
- Focus on your Posture
If you know anything about signing or you know any singer, you will come to know that your posture plays a very vital role in generating the sound of your choice. The ideal posture for a higher voice and proper tone is to sit with your back straight, keep your tongue as low as possible, rest your mouth and look slightly upward to make your neck relax a bit. This can completely transform your voice and make it sound like a professional.
How to make your Voice Higher with Filmora
If you have already recorded a video and that video has a very pathetic voice quality, then there is also a hope to make your voice higher by using Filmora. The previous step will help you improve your voice quality to a great extent, but if you don’t want to re-record the video and improve the existing video, you can follow these steps to make sound better.
Method 1: Low Bass
Step 1: Open Filmora, and export the video to a higher voice.
Step 2: Drag and drop the video into the timeline to enable its editing options.
Step 3: Right Click on the video, and select Adjust Audio from the list to open the option.
Step 4: It will open the settings related to the sound of your video, you make any required changes from here, in order to higher its voice.
Step 5: From the equalizer drop-down menu, select the low base option. It will make your voice heavy and will make it more audible than its original voice.
Method 2: High-Pitched Voice
Step 1: Open Filmora and export the video to a higher voice.
Step 2: Drag and drop the video into the timeline to enable its editing options.
Step 3: Right Click on the video, and select Adjust Audio from the list to open the option.
Step 4: It will open the settings related to the sound of your video, you make any required changes from here, in order to higher its voice.
Step 5: From these options, go to the pitch, and increase by two to three points. Now play your video and check the results. It will make the voice of your video higher with a high pitch.
Method 3: Low-Pitched Voice
Step 1: Open Filmora, and export the video to a higher voice.
Step 2: Drag and drop the video into the timeline to enable its editing options.
Step 3: Right Click on the video, and select Adjust Audio from the list to open the option.
Step 4: It will open the settings related to the sound of your video, you make any required changes from here, in order to higher its voice.
Step 5: From settings, go to the pitch settings, and decrease it by two to three points. It will make your voice sound intense and make it a bit higher than its original voice. Play the video and notice the changes. You can change the pitch settings accordingly after checking its results and choose a setting that best suits your video.
Both of these steps can help you enhance the quality of your voice to a great extent. For better results, follow both steps, higher your voice while recording and higher your voice with Filmora. The first step will let you make your voice higher using your own mouth and lungs. The second step will help you improve it more and you can choose any one method from the three available methods that best suits your video and voice of the video and make your videos more engaging and interesting video. So, let’s transform your videos to make them more engaging and appealing to the viewers.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Liza Brown
Mar 27, 2024• Proven solutions
A video is nothing without a clear and smooth voice. It doesn’t matter if you have a high definition video quality but your video doesn’t have a clear and loud voice, it will be a failure. If you are recording a video and you don’t have the equipment to record your voice properly, low voice can become a big problem in your recorded videos. But some steps can help you and show you the ways of how to make your voice higher. Increasing one’s voice is not an as easy task as it may seem. Just like other skills, it is also a form of skill that requires a lot of practice and experience to master. There are o many factors to consider while recording a video with a high voice or pitch. In this article, we are going to describe how to make your voice higher with two steps. In the first step, we will talk about the factors that you must consider while recording your video. And in the 2nd step, we will be discussing the way of how to make your voice higher using Filmora. Both of these steps require patience and practice.
Step 1: How to make your voice higher while recording
Step 2: How to make your voice higher with Filmora
So let’s start with the first step to making your voice higher while you are recording your video. If you can successfully make your voice higher during this process, it will not require any hard work to make it higher in the post-production process.
You might be interested in:
How to make your Voice Higher while Recording
There are so many ways and exercises that can help change the pitch of your voice and make it higher even if you don’t have high pitch voice. We are going to discuss 5 exercises that can help you achieve this task. But remember that these exercises will practice and patience in order to show the required results.
- Focus on Breathing
The higher voice you want the more air it will need. To higher your voice, you have to take deep breathes from your nose and release them while speaking. It will boost the pitch of your voice and make it higher than your usual voice. Singers use this technique while they want to hit a high pitch. It gives your body and lungs the power to generate a higher voice. Breathing plays a very vital role in making your voice higher. If you are not breathing correctly, you can’t keep the voice higher for a longer period of time. Just like all other skills, this exercise also needs a lot of practice to master. Start practicing this technique by reading a sentence, then move forward to a paragraph, and so on. Following this process will make you master the process of highering your voice using your own breaths. Then you can start using this technique in all of your videos very easily.
- Listen to Your Voice
Do you find it amusing to know that you haven’t ever heard your own voice if you haven’t listened to your own recorded audio or video? You will find your voice very different on the recording than in reality. Because in reality, it is difficult to focus on listening to your own voice while you speak. You will probably hate your own voice the first time you listen to it as a recording. To make your voice higher, it is important to listen and observe your voice very carefully and analyze where it goes down and where it goes up. It will help you improve your voice after every try. This practice will help you master the process of highering your voice using your own analyzes.
- Remove the Obstacles
Since now we know that the main way to make your voice higher is to provide your lungs power with the help of your own breathes. But what makes it decrease its intensity is the obstacles that come in the way of your voice. The first and main obstacle that your voice faces is your tongue. Everyone knows the importance of tongue in helping you speak and generate words. But it sometimes works as a hindrance to block the sounds our lungs make. Therefore, it is very important to keep your tongue in the right position while generating high pitched voice. Try to keep your tongue as low as possible and don’t let it touch the upper part of your mouth to avoid creating a blockage for your voice. In the beginning, it will feel like an impossible task, but as you move forward and practice it more often, you will notice the difference. This will enhance your voice a lot and take it to a level, where you had never imagined it would reach. If you are failing again and again, then don’t worry. This is not an easy task to accomplish, it requires patience and consistency to master.
- Use Nasal Voice
There are multiple ways of generating voice in a human body. Just like the mouth, sometimes the nose is also used to release voices. Those who use Nasal voices while they speak have a higher voice than those who don’t. The gateway used by the nose to release voice is very narrow, producing a thinner voice resulting in high pitched sound. It is also not a good practice to use this technique very often. Because it can make you irritated and annoying. Try to mix the nasal voice only 50% to the voice of your mouth to keep it safe, and sound normal.
- Focus on your Posture
If you know anything about signing or you know any singer, you will come to know that your posture plays a very vital role in generating the sound of your choice. The ideal posture for a higher voice and proper tone is to sit with your back straight, keep your tongue as low as possible, rest your mouth and look slightly upward to make your neck relax a bit. This can completely transform your voice and make it sound like a professional.
How to make your Voice Higher with Filmora
If you have already recorded a video and that video has a very pathetic voice quality, then there is also a hope to make your voice higher by using Filmora. The previous step will help you improve your voice quality to a great extent, but if you don’t want to re-record the video and improve the existing video, you can follow these steps to make sound better.
Method 1: Low Bass
Step 1: Open Filmora, and export the video to a higher voice.
Step 2: Drag and drop the video into the timeline to enable its editing options.
Step 3: Right Click on the video, and select Adjust Audio from the list to open the option.
Step 4: It will open the settings related to the sound of your video, you make any required changes from here, in order to higher its voice.
Step 5: From the equalizer drop-down menu, select the low base option. It will make your voice heavy and will make it more audible than its original voice.
Method 2: High-Pitched Voice
Step 1: Open Filmora and export the video to a higher voice.
Step 2: Drag and drop the video into the timeline to enable its editing options.
Step 3: Right Click on the video, and select Adjust Audio from the list to open the option.
Step 4: It will open the settings related to the sound of your video, you make any required changes from here, in order to higher its voice.
Step 5: From these options, go to the pitch, and increase by two to three points. Now play your video and check the results. It will make the voice of your video higher with a high pitch.
Method 3: Low-Pitched Voice
Step 1: Open Filmora, and export the video to a higher voice.
Step 2: Drag and drop the video into the timeline to enable its editing options.
Step 3: Right Click on the video, and select Adjust Audio from the list to open the option.
Step 4: It will open the settings related to the sound of your video, you make any required changes from here, in order to higher its voice.
Step 5: From settings, go to the pitch settings, and decrease it by two to three points. It will make your voice sound intense and make it a bit higher than its original voice. Play the video and notice the changes. You can change the pitch settings accordingly after checking its results and choose a setting that best suits your video.
Both of these steps can help you enhance the quality of your voice to a great extent. For better results, follow both steps, higher your voice while recording and higher your voice with Filmora. The first step will let you make your voice higher using your own mouth and lungs. The second step will help you improve it more and you can choose any one method from the three available methods that best suits your video and voice of the video and make your videos more engaging and interesting video. So, let’s transform your videos to make them more engaging and appealing to the viewers.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Also read:
- New Audiophiles Manual to Volume Control on Digital Media – Updated
- Updated Pioneering Linux Audio Capture Discovering the Five Most-Loved Recorders and Tips for Excellence
- Updated Chorus Cutter Suite Construct Individualized Musical Backdrops
- New Muting Zoom A Step-by-Step Guide for Quiet Calls on Laptops & Phones for 2024
- New Behind-the-Scenes Guide on the Process of Adding Songs to iMovie Projects
- New 2024 Approved Cutting-Edge Speech Recognition Apps A Review of the Best Options
- Updated 2024 Approved Premier List of the Most Reliable Song Recorders on the Market
- Updated The Quietude Process An Orderly Procedure to Dissolve Disruptive Drones
- New 2024 Approved Affordable Sound Mastery The Best Free Audio Editor Applications for Windows & macOS Users Today
- Updated Tail Wags & Whispers Dognoise Auditory Experience for 2024
- New 2024 Approved Leveraging the Power of Lame A Comprehensive Installation Manual for Audacity Users
- Master the Art of Audio Editing with These Top 10 Competitors to Audacity
- New 2024 Approved Amplify Your Music The Best 8 Android DAWs to Master the Art of Producing
- 2024 Approved Mastering iPhone Voice Recording A Comprehensive Tutorial
- Updated The Definitive List of Popular Software for Auditory Disentanglement From Video Footage
- Updated From Airwaves to Hard Drives A Comprehensive Manual for Computer-Based Podcast Archiving for 2024
- Manage Microphone Background Noises To Perfection With The Best Tools for 2024
- Exploring Leading Apps to Purify Recordings From Distractive Noises for 2024
- Comprehensible Guide to Evaluating Mac Audio Software for 2024
- New 2024 Approved Where to Download and Listen DJ Music?
- 2024 Approved Methods to Embed Audios in MKV Files New Edition Update Guide
- New Freely Accessible Comedy Soundtracks 5 Recommended Sources for Video Editors for 2024
- New 2024 Approved Freely Available Tunes to Elevate Your Film and Video Compositions
- Updated 2024 Approved Voice Variation Ventures 10 Novel Approaches to Infuse Joy Into Phone Conversations
- New Identify Disturbing Sound Waves for 2024
- Updated 2024 Approved Useful Resources to Listen or Download Soft Background Music
- New Audio Fusion Seamlessly Converting AIFF Files Into MP3 Format
- Updated 10 Must-Have Royalty-Free Audio Laughs to Enhance Your Multimedia Productions
- 2024 Approved Enhancing Accessibility Documenting Computer Audio in Audacity
- How to Downgrade iPhone 13 mini to an Older iOS Version? | Dr.fone
- In 2024, Where Is the Best Place to Catch Dratini On Samsung Galaxy S24 | Dr.fone
- New In 2024, Convert WebM to MP4 with Ease Top 10 Tools
- Simple and Effective Ways to Change Your Country on YouTube App Of your Realme 10T 5G | Dr.fone
- 5 Easy Ways to Copy Contacts from Oppo Reno 10 5G to iPhone 14 and 15 | Dr.fone
- In 2024, Locked Out of Apple iPhone 6s? 5 Ways to get into a Locked Apple iPhone 6s | Dr.fone
- New How to Make a FLV Photo Slideshow
- The 6 Best SIM Unlock Services That Actually Work On Your Vivo X100 Pro Device
- In 2024, Top Aspect Ratio Tools Calculate Perfect Proportions
- How To Update or Downgrade iPhone SE (2022)? | Dr.fone
- In 2024, No Download? No Problem! The Best Speech to Text Apps for Mac You Need to Try
- Want to Uninstall Google Play Service from Vivo Y100A? Here is How | Dr.fone
- In 2024, Here are Some of the Best Pokemon Discord Servers to Join On Vivo T2 Pro 5G | Dr.fone
- Updated Silence Is Golden Removing Background Noise in Final Cut Pro X Made Easy for 2024
- In 2024, Pattern Locks Are Unsafe Secure Your Samsung Galaxy XCover 7 Phone Now with These Tips
- New 2024 Approved The Ultimate Guide to Creating Personalized DVDs with Movie Making Software
- In 2024, Does Life360 Notify When You Log Out On Apple iPhone 15 Plus? | Dr.fone
- How to Fake Snapchat Location on Apple iPhone 11 | Dr.fone
- 2024 Approved Steps to Make a Neon Dance Effect With Filmora
- How to Fix when Apple Account Locked From Apple iPhone 13?
- Updated In 2024, The Complete AIFF Converter Resource Reviews, Comparisons, and More
- Updated Unlock Amazing Animations 10 Essential Online Tools
- 2024 Approved 10 Best Meme Text to Speech Tools Windows, Mac, Android, iPhone
- New In 2024, Free Online Video Editing 10 Best Trimming Tools and Software
- How to Rescue Lost Photos from Xiaomi Redmi Note 12R?
- In 2024, How to Unlock Disabled Apple iPhone 12/iPad Without Computer | Dr.fone
- How to Fix Pokemon Go Route Not Working On Realme 12 Pro 5G? | Dr.fone
- Advance Repair for Bad and Corrupt Video Files of Galaxy A25 5G
- 2024 Approved Free and Easy The Best 3GP Video Rotators
- Title: 2024 Approved A Curated Selection of Freely Available Sound Pressure Balancers
- Author: Paul
- Created at : 2024-05-20 01:47:43
- Updated at : 2024-05-21 01:47:43
- Link: https://voice-adjusting.techidaily.com/2024-approved-a-curated-selection-of-freely-available-sound-pressure-balancers/
- License: This work is licensed under CC BY-NC-SA 4.0.